EAIA & GPTC Present The 2013 Hyannis Antique Tool Auction, May 17, 2013, 6 PM Eastern. Preview 3 to 6 PM.

Return to Great Planes Trading Co. HOME

EAIA & GPTC Present

THE 2013 HYANNIS TOOL AUCTION

May 17, 2013, 6 PM

Double Tree Hotel Cape Cod

287 Iyannough Road

Hyannis, MA 02601

(Preview from 3 to 6 PM)

To see the photos processed thus far in a gallery view click (HERE. ) Click on any photo to enlarge it.

A printable .doc list can be found (HERE)
A printable .pdf list can be found (HERE)


001. Ebony stuffed brass or bronze shoulder or rabbet plane, the ebony stuffing needs to be re-glued or secured with wood screws from the outside, one small chip on top of wedge, very good overall. (Photo)

002. SHARRATT & NEWTH LONDON glass cutter with diamond, nice knurled nut, appears to have been mounted in a machine that was used to cut circles in glass. (Photo & Photo 2)

003. CHEMICAL MORTAR SIGHT MII, brass with tag on side, very good overall. (Photo & Photo 2)

004. Wm. MARPLES & SONS LTD SHEFFIELD ENGLAND 6-inch dovetail saw, complete and very good. (Photo)

005. First style Windsor beader, complete and very good. (Photo)

006. TAVERNIER - GRAVET RUE MAYET 19 PARIS boxwood alidade rule with scales on top and one edges, boxwood base with paper label on back (all in French) and having a nickel plated sighting devise on one end with a level, and a bubble level is mounted to the other end, fine overall. (Photo & Photo 2 & Photo 3)

007. G. L. Chamberlain, Marietta, OH patented (U.S. No. 60,690) combined square level with protractor sides, BACHELDER & CO. SOLE U.S. AGENTS PITTSBURGH PA, PAT. JAN. 1, 1867, nice heart-shaped cutouts, very good overall. (Photo & Photo 2)

008. Hennig Patent (U.S. No. DE35,100) decorative nickel plated hammer, made on a design patent issued Sept. 17, 1901 to Charles J. Hennig of Brooklyn, New York, this hammer is complete and is in fine overall condition. (Photo)

009. Nice Archimedes drill with handle, most likely English, very good. (Photo)

010. Early door or gate lock with key very good overall condition. (Photo & Photo 2)

011. Unusual bung cutter, very good overall. (Photo & Photo 2)

012. Cleveland Rule Co. board rule, complete and very good. (Photo & Photo 2)

013. Odd ROLCUT cane-handled pruning? saw MADE IN SHEFFIELD ENGLAND, very good overall. (Photo & Photo 2)

014. Unusual African padlock made of carved wood with two seated figures, very interesting. (Photo)

015. Brass padlock that is locked by unscrewing the key, has what looks like middle eastern writing on one side along with a heart decoration, complete with key, very good overall. (Photo & Photo 2)

016. Bemitine sun lock padlock that is locked by unscrewing the key, steel construction, very good overall. (Photo)

017. English or Preston-style plumb bob the letter S inside a shield and the number 7 stamped into the side, complete with original reel, fine overall. (Photo)

018. Unusual LOWE & FLETCHER WILLENHALL brass padlock with original key, very good overall. (Photo & Photo 2)

019. Little bulldog padlock, we have not been able to open it with the key? provided, a neat little piece. (Photo & Photo 2)

020. Stanley #993 corner brace, needs a good cleaning, very good overall. (Photo)

021. Fine A.R. Robertson Patent 2-piece bill poster's hammer, complete and fine. (Photo & Photo 2)

022. John S. Fray & Co. No. 80 corner brace, complete and very good overall. (Photo)

023. Fine pair of wooden trammel points, could use a nice boxwood beam to show them off a little better. (Photo)

024. Nice Underhill Edge Tool 4-inch slick, nice handle is secured in socket with a wood screw. (Photo)

025. Two mallets one with round face and one with square. The round faced one has a chip from one side of the lignum head, but is still very good. (Photo)

026. Fine Ohio Tool Co. 3-inch slick, has about 1-inch of the previous handle stuck in the socket, get it out and put in your own handle and it will be good to go. (Photo)

027. Stanley #112 scraper plane with original STANLEY toothing iron, needs light cleaning, very good. (Photo)

028. Union #90 scraper (similar to Stanley #283), complete with UNION marked blade ane nice wooden handles, fine overall. (Photo)

029. Stanley #10 1/2 carriage maker's rabbet plane TYPE I with adjustable throat, needs light cleaning, very good overall. (Photo)

030. Stanley #21 SW adjustable try square, SW logo on fine blade, nice nickel plating, very good overall. (Photo)

031. Stanley #83 scraper plane with nice unmarked blade and wide roller, very good overall. (Photo)

032. Unusual Stanley SW 10-inch Stillson-type pipe wrench, complete and very good. (Photo)

033. Scarce Stanley #2C 7-inch corrugated bottom smooth plane, very good overall. (Photo)

034. Pair of Stanley aluminum plane handles for planes #5 and larger, both very good. (Photo)

035. Marbles waterproof match safe, very good overall. (Photo)

036. Stanley #24 transitional smooth plane, very good overall condition. (Photo)

037. Stanley DEFIANCE stamped or pressed steel block plane, good overall. (Photo)

038. Stanley #95 edge trimming block plane, early model with script logo and patent date, good overall. (Photo)

039. Stanley scratch awl with wooden handle, marked on shaft, very good; and an unusual NOS screwdriver-type tool marked ORD DEPT, very good. (Photo)

040. Two stanley spoke shaves: 151M complete and fine; and an unknown model with adjustable frame and broken blade, has 1858 patent dated cast into underside of handle. (Photo)

041. Early Stanley Rule & Level Co. #65 chamfer spokeshave, complete and fine. (Photo)

042. Stanley #64 spokeshave with V-logo blade, very good overall. (Photo)

043. Stanley #79 side rabbet plane, has owner initials on skate, very good overall. (Photo)

044. Scarce Stanley #197 hardboard fluting tool, in new old stock condition. (Photo)

045. Stanley ball peen hammer with intact decal on handle, fine overall; plus a pair of 5 1/2-inch KRAEUTER & CO. No. 1356 pliers, fine overall. (Photo)

046. Stanley 6-inch iron block plane with nickel plated cap, very good overall. (Photo)

047. Stanley #5 1/2 16-ounce claw hammer, complete and fine. (Photo)

048. Scarce Stanley 4-square block plane, complete and very good. (Photo)

049. CENTURY OF PROGRESS 1933 CHICAGO souvenir pinball game, complete and in very good working condition. (Photo & Photo 2)

050. SPECTACULAR 14-inch violin-shaped padlock, complete with key, we've only heard of one other that Ron Pierson owned and we lost track of that one. The 12-inch ruler in the photo is not included. (Photo & Photo 2)

051. Stanley #65 low angle block plane, complete and very good. (Photo)

052. Stanley #3 prelateral smooth plane, early style tote missing splinter from side of spur, solid adjuster nut, beaded knob, very good overall. (Photo)

053. Union 6-inch iron block plane with nickel plated lever cap, very good overall. (Photo)

054. Stanley #4 1/2C heavy duty smooth plane with STANLEY lever cap with orange background, good BB logo blade, very good overall. (Photo)

055. Unusual Stanley #61 low angle block plane, nice rosewood handle, very good overall. (Photo)

056. Stanley "Household" jack plane (same size as #5 1/4) complete and very good. (Photo)

057. Sargent #411 (same size as Stanley 5 1/4) junior jack plane, complete and very good. (Photo)

058. Stanley #10 carriage maker's rabbet plane, good Q-logo blade, very good overall. (Photo)

059. Union No. X5A heavy jack plane (same size as Stanley 5 1/2), tote glued in middle, good overall. (Photo)

060. Stanley #5 1/2 heavy duty jack plane, complete and fine. (Photo)

061. Stanley #12 cabinet scraper with good unmarked blade, nice rosewood handle, very good overall. (Photo)

062. Pair of Union 6-inch iron block planes with Excelsior-style bodies; one has early Stanley knuckle jointed lever cap; the other has proper cap and is very good. (Photo)

063. Stanley #41 MILLERS PATENT plow plane with intact filletster bed and wrap around fence, early unslotted screws, very good overall. (Photo)

064. Union 6-inch iron block plane with knuckle jointed lever cap, very good overall. (Photo)

065. H.C. MARSH No. M3 corrugated iron smooth plane, complete with original blade nice tote and knob, very good overall. (Photo)

066. Stanley #68 rabbeting spoke shave, SW blade, good overall. (Photo)

067. Stanley #140 rabbeting block plane, early R&L logo blade, very good overall. (Photo)

068. Early Stanley #48 tongue & groove plane, with japanned body, both blades intact, very good. (Photo)

069. Stanley #15? Excelsior-style body, still has star screw for hold tail handle, but tail handle is MIA, tiny chip in rear corner of throat, good overall. (Photo)

070. Stanley #39 3/8-inch dado plane, complete and very good. (Photo)

071. Three block planes: DIAMOND EDGE (Stanley) 6-inch, complete and very good; Keen Kutter (Ohio Tool) KK103, very good; and a Stanley #100 mini block plane with squirrel tail handle, R&L logo blade, very good overall. (Photo)

072. Pair of Stanley rabbet planes: unusual SW #192 with model number cast into handle rather than in the body, complete and fine; and an early #180 with cast cap screw, japanning likely enhanced, no depth stop, very good. (Photo)

073. Stanley #67 Universal spoke shave with both bottoms, intact fence, fine SW blade, fine overall. (Photo)

074. Unusual Stanley SW pliers, produced for one year only, complete and fine. (Photo)

075. Stanley #81 cabinet scraper, STANLEY blade, nice rosewood bottom, very good nickel plating, fine overall. (Photo)

076. Unusual Stanley No. 1 1/2 pliers with offset jaws, fine overall. (Photo)

077. Stanley #40 1/2 extra wide scrub plane, V-logo blade, nice early-style knob and nice tote, lever cap has a welded repair and has been repainted, very good overall. (Photo)

078. Stanley #7 pliers, complete and very good. (Photo)

079. Scarce Stanley #5 1/4C junior jack plane, partial decal on tote, very good overall. (Photo)

080. Scarce Stanley No. 9 side cutters, first we have seen or sold, very good. (Photo)

081. Two transitional planes: GAGE TOOL CO. No. 7 jack plane with clunky homemade tote, good overall; and a nice Stanley #27 1/2 wide body jack plane, V-logo iron, complete and fine. (Photo)

082. Millers Falls #1 "cigar" spoke shave, complete and very good. (Photo)

083. HAMLER TOOLS 13-inch rosewood & brass scraper, a full size usable tool made by master miniaturist Paul Hamler, in fine condition. (Photo & Photo 2)

084. Two wooden tongue planes: on left is an AUBURN AUBURN TOOL CO. that is missing its iron; and a CHAPIN UNION FACTORY, each has a movable fence on the bottom, both in very good overall condition. (Photo & Photo 2)

085. Stanley #16 brass-bound engineer's rule, with Gunter's and Engineers' scales, brass slide, intact indexing pins, has a chip from the wood on the side with the scales, good overerall. (Photo & Photo 2)

086. J. TAYLOR & SON ADVANCE SHEFFIELD 12-inch steel back saw with split nuts, complete and very good. (Photo & Photo 2)

087. Stanley #26 carpenter's slide rule 2-foot, 2-fold, with brass joint and tips, the receiving holes for the indexing pins are a tad wallowed out near the tops, very good overall. (Photo & Photo 2)

088. Disston & Sons 14-inch steel back saw, scuffed but intact handle, needs light cleaning, very good. (Photo & Photo 2)

089. Early Stanley Rule & Level Co. #27 carpenter's sliding rule with Gunter's scales, a brass slide, intact indexing pins, very good overall. (Photo & Photo 2)

090. W. TYZACK & SONS 14-inch brass-back saw with CAST STEEL blade, split nuts securing handle, nice elephant logo, very good overall. (Photo & Photo 2)

091. Unknown make #29 2-foot, 2-fold rule with circular brass joint and brass tips, the indexing pin hole is wallowed out on both sides, good overall. (Photo & Photo 2)

092. SO PAC (Southern Pacific Railroad) adz, with handle that needs some work to properly fit, blade is very good; plus a D.R. BARTON ROCHESTER adz with corner chip, this one also has a handle that will need a wedge made for it to secure it, can be restored to usable condition. (Photo & Photo 2)

093. Unmarked mahogany ships bevel with brass blades, very good overall. (Photo & Photo 2)

094. Common Sense-style 46-ounce brass plumb bob with steel tip and removable top, very good overall. (Photo & Photo 2)

095. Paul Hamler money clip with small folding knife blade and file with the Stanley Imp riding on a block plane etched into the ivory panel on one side, fine. (Photo & Photo 2)

096. Stanley Rule & Level Co. #2 brass plumb bob with integral reel, very good. (Photo & Photo 2)

097. Greene Patent (U.S. No. 449,609) spirt level and inclinometer that can be attached to a rule or straightedge, fine overall. (Photo & Photo 2)

098. Contemporary 20-ounce brass plumb bob with removable top, very good. (Photo & Photo 2)

099. DAZEY No. 40 butter churn with original 1 gallon glass jar, complete and very good. (Photo & Photo 2)

100. Half set OWOSCO TOOL CO. NEW YORK No. 180 hollow & round planes (18 total), all are complete and fine and free of any previous owner names, this is the first time we have had an intact 1/2 set by a U.S. maker to sell. (Photo & Photo 2)

101. Paul Hamler money clip with small folding knife blade and file with a center-wheel plow plane etched into the ivory panel on one side, has some light rust on one side of the file blade, very good overall. (Photo & Photo 2)

The following five lots are donated ones with the sale to benefit the EAIA Endowment Fund.

102. Stanley #129 and #127 Liberty Bell transitional bench planes, each is complete and very good. (Photo & Photo 2 & Photo 3)

103. Stanley #S5 unbreakable steel jack plane, little original japanning remains, but the rosewood tote and knob are very good, and the body is not rusty or pitted, much better than average condition. (Photo & Photo 2)

104. Unusual Seldon Bailey Patent (U.S. No. 105,766) box scraper, the brass ferrule is marked PATd JULY 26, 1870 patent date, ferrule has a crack thru the letter P, has a lever operated blade holder, very good overall. (Photo & Photo 2)

105. Stanley #45 Type 7B combination plow plane, nice floral casting, comes with original box of blades including slitter, sash and match blades, long and short rods, nice rosewood handle and knob, beading stop and both depth stops, and early style screwdriver, plane has very good nickel plating. (Photo & Photo 2 & Photo 3)

106. Stanley #39 1/4-inch dado plane, early model with size in an oval on the side, and cast head on cap screw, intact blade and slitters, very good overall. (Photo & Photo 2)

107. RARE Stanley 12 3/4 scraper plane, complete with fine original bottom, SW blade, 95 percent plus japanning, fine overall. (Photo & Photo 2 & Photo 3 & Photo 4)

The following 22 lots of tinsmiths tools come out of one shop. We will be picking them up on our way to Hyannis. Bill McMillen generously helped with the descriptions based on digital photos. More details and photos will be posted ASAP.

108. Three raising hammers, they appear to be a #2, #3, & #4, one marked ATHA Tool Co. with horseshoe logo; and a #4 by Peck, Stow & Wilcox Berlin, CT. (Photo)

109. J. Wilcox candle mould stake. (Photo)

110. C. Brombacher, Tarrytown, NY double seaming stake. (Photo)

111. PS&W creasing stake. (Photo)

112. Square stake. (Photo)

113. Hatchet stake #2 Peck, Stow & Wilcox East Berlin, CT. (Photo)

114. Combined snip and pipe crimper. (Photo)

115. Round Head Stake. (Photo)

116. Beakhorn stake. (Photo)

117. Large PS&W brass-topped burring machine with stand, handle is cracked, otherwise it appears to be in good usable condition. (Photo)

118. Small Peck, Stow & Wilcox East Berlin, CT turning machine with stand. (Photo)

119. L. Wilcox square pan swedge. (Photo)

120. Setting down machine. (Photo)

121. Improved Bench Plate. (Photo & Photo 2)

122. Standard or stand for one of the machines. (Photo)

123. Peck Stow & Wilcox PEXTO No. 620 beading machine, with three pairs of wheels in addition to the pair currently in the machine. (Photo & Photo 2)

124. Stow's Patent 17 1/2-inch adjustable bar folder. (Photo)

125. Brass topped wiring machine by N & G Taylors Philadelphia . (Photo)

126. Tinner's work bench with two sliding drawers below, cutout for the improved bench plate in lot 14. (Photo)

127. Forming Machine. or tin pipe former with 29 1/2-inch 2-inch diameter rollers. (Photo)

128. Assorted small tools from shop.

129. Large PS&W brass-topped turning machine with stand, complete and very good overall. (Photo)

130 Stanley #90 rabbet plane, no depth stop, needs light cleaning, good overall; plus a Stanley #78 with intact stop, no fence or rod, good usable condition. (Photo)

131. Later model Stanley #40 scrub plane with scuffed but intact tote and knob, needs a good cleaning, very good overall. (Photo)

132. Pair of Stanley planes: #148 match plane, intact tongue blade, plow blade MIA, very good overall; and an early nickel plated #50 light duty plow with vine cast into the handle, one blade included, very good overall. (Photo)

133. Stanley #81 cabinet scraper with nice nickel plating, good rosewood bottom, good SW-logo blade, very good overall. (Photo)

134. FINE wooden yarn winder on wooden base with three little legs, has chip carving around the top and around the top of the base, a well-made and very nice winder. (Photo & Photo 2)

135. Early pump log auger bit, some pitting, good overall. (Photo & Photo 2)

136. U.S. AMES ice axe, mountain climbing tool, complete and very good. (Photo & Photo 2)

137. Early 19th Century herb chopper mounted to a piece of wood by way of a threaded post, so it can be swung from side to side, very good. (Photo & Photo 2)

138. Special clamping fixture for making handles, this item would be mounted into a bench vise, and a piece of wood would be clamped into it and worked with a drawknife and spokeshaves. (Photo & Photo 2)

139. Large 14-inch diameter brass bucket with steel bail handle, very good overall. (Photo & Photo 2)

140. Nice iron bound and banded Japanese tool box 6 X 11 X 15, the locking hasp is missing, but the pin that secures it is in place, very good overall. (Photo & Photo 2 & Photo 3)

141. Heavy cast iron skillet with three integral legs, very good overall. (Photo & Photo 2)

142. Pair of early T augers, one with gimlet-type bit, and one with unusual Scandinavian bit, both have nice wooden handles. (Photo & Photo 2)

143. Pair of small copper jello molds, one in shape of fish, each has as ring that it can be hung from. (Photo & Photo 2)

144. Nice and early looking copper tea kettle, very good overall. (Photo & Photo 2 & Photo 3)

145. Small handled Nantucket basket, complete and very good. (Photo & Photo 2)

146. Even smaller Nantucket handled Nantucket basket, very good overall. (Photo & Photo 2)

147. Scarce, antique wooden timber or log roller used to move beams along a wall or across the frame in timber frame construction. This is made using pinned mortise and tenons, the ends of the roller have iron bands, it is complete and very good. (Photo & Photo 2)

148. Stanley #78 rabbet & filletster plane, SW-logo blade, complete and fine overall. (Photo)

149. Stanley #113 compass plane, good Q-logo blade, intact rear handle, will clean to very good overall condition. (Photo)

150. Lot of 10 WINCHESTER STORE printers blocks each depicting a different scene used to advertise the hardware and sporting goods that Winchester Stores sold during their failed attempt to break into the hardware business during the 1919 to 1929 time period. (Photo & Photo 2 & Photo 3 & Photo 4)

151. Nice copper tea kettle, very good overall condition. (Photo & Photo 2 & Photo 3)

152. Early all-wooden butter churn with original wooden dasher, churn has traces of old blue/green paint, intact steel bands, very good overall. (Photo & Photo 2 & Photo 3)

153. Small Pacific Islands dipper with a handle mounted thru two holes in the top of the vessel, very good. (Photo & Photo 2)

154. Saxony-type spinning wheel, need a belt to connect the drive wheel to the bobbin, will also need small piece of leather used as a bearing repaired or replaced, some typical chipping around the drive wheel, good overall condition. (Photo & Photo 2)

155. Kerosene lamp round base, nice frosted glass chimney, complete and fine overall. (Photo)

156. Unusual butchering axe, good overall. (Photo & Photo 2)

157. Kerosene lamp square base, nice glass chimney, complete and fine overall. (Photo)

158. Nicely made blacksmiths double caliper, complete and very good. (Photo & Photo 2)

159. Two Kerosene lamps with round bases, one has nice frosted glass chimney, the other (not shown in photo) has clear glass chimney, both are complete and fine overall. (Photo)

160. CROSS Sterilized TACKS tin, point-of-sale, revolving display stand, fine overall. (Photo & Photo 2)

161. Pair of early wheelwright's travelers, both have moderate to heavy pitting. (Photo & Photo 2)

162. Lot of three framing squares: Stanley SW No. 14; ZENITH (MARSHALL WELLS HARDWARE DULUTH, MINN); and EAGLE SQUARE MFG CO. NP 100, all in very good overall condition. (Photo & Photo 2)

163. Two-spoke wheelwright's traveler with twisted wire handle, some pitting, good overall. (Photo & Photo 2)

164. Broad axe with offset handle, possibly used as a cooper's side axe, end of handle has electric tape, otherwise very good. (Photo & Photo 2)

165. Little burl mallet, complete and fine. (Photo & Photo 2)

166. Carved wooden brace with one pad, the pad is held by the downward pressure on the bit when in use, very good. (Photo & Photo 2)

167. Pair of wooden beading planes: SANDUSKY 1/4-inch center bead, complete and fine; and an A. HOWLAND & CO. 7/8-inch side bead, complete and very good. (Photo & Photo 2)

168. Early carved wooden pad-type brace, no pads included. (Photo & Photo 2)

169. Antique wooden butter mold with carved print, complete and very good. (Photo & Photo 2)

170. Carved wooden brace with one pad, the pad held by downward pressure on the bit. (Photo & Photo 2)

171. Pewter mug or tankard with four hallmarks or touch marks on one side, PINT with another hallmark near the handle on the other side, and MADE IN ENGLAND, LONDON on bottom, very good overall condition. (Photo & Photo 2 & Photo 3)

172. J. DENISON unhandled screw-arm boxwood plow plane, has one cracked arm bracket (rear arm), but is otherwise complete and very nice. (Photo & Photo 2 & Photo 3)

173. Pint pewter mug or tankard with glass bottom, marked 8507 MADE IN ENGLAND ROUNDHEAD PEWTER. This trademark was used by Samuel Groves of Birmingham England between 1922 and the 1950s, complete and very good overall. (Photo & Photo 2 & Photo 3)

174. Henry Disston & Sons 26-inch R-1 THE RANCHER by DISSTON rip saw, nice etch, fine handle, very good overall. (Photo & Photo 2)

175. Pair of hand saws: 26-inch Disston D-23 with 10 ppi blade, scuffed but intact handle, etch legible but somewhat faint, very good; and a Disston D-8 with 24-inch 8 ppi blade, faint etch, nice handle, good usable condition. (Photo)

176. Pair of hand saws: WARDS MASTER QUALITY lightly used 26-inch, 8 ppi blade, partial price tag still on handle, fine overall; and a 26-inch Disston D-8 with 8 ppi blade, good etch, fine handle, very good overall. (Photo)

177. Three hand saws: Disston D-23 26-inch 8 ppi blade, very good; 22-inch D-23 panel saw with 11 ppi blade, very good; and a 16-inch, no etch visible, WARRANTED SUPERIOR medallion, nice handle, very good overall. (Photo)

178. Three hand saws: 20-inch Disston D-8 needs a light cleaning, very good overall; 26-inch Penn State, very good overall; and a 20-inch D8, nice apple handle, very good overall. (Photo)

179. Two hand saws: Disston 26-inch 6 ppi blade, scuffed and chipped thumb-hole handle, good usable condition; Early CRAFTSMAN SPRING STEEL (Disston?) 20-inch 11 ppi blade, very good overall. (Photo)

180. Three hand saws: RELIABLE 20-inch with 9 ppi blade with nice etch, very good overall; Disston 22-inch D-8 with 10-ppi blade, fine overall; and a ??? No. 116 with 22-inch, 8 ppi blade, faint CINCINNATI etch, some rust, and light pitting. (Photo)

181. Pair of rosewood handled sliding bevels: Stanley #25? with 10-inch blade, round patent date stamped into handle, very good; and an unknown make with 10-inch blade, brass trim, decorative screw head, fine overall. (Photo & Photo 2)

182. RARE Hill Patent (U.S. #304,196) combined T-Square and bevel with cast iron handle and 10-inch blade, has a detent locking pin to set the blade to fixed angles, marked BOSS on one side and PAT.AUG.26.84. on the other side, brass locking nut, very good overall. (Photo & Photo 2)

183. Pair of rosewood handled sliding bevels: Stanley #25 with 6-inch blade, fine overall; and an unknown make with 8-inch blade, decorative screw, very good. (Photo & Photo 2)

184. Four sliding bevels: Two Stanley #18 models with 10-inch blades, one early and one later, both very good; EAGLE with and EAGLE and TRADE MARK on one side, nice KERSHAW BROS CLEVE. PAT APL'D FOR blade, very good overall; and a Stanley #25-type with SOUTHINGTON HARDWARE CO. blade, very good overall. (Photo & Photo 2)

185. Pair of sliding bevels: Stanley #25? with rosewood handle, unmarked 10-inch blade, complete and very good; and an unknown make with ebony handle and brass trim, 10 1/2-inch blade, handle is cracked on one side, good overall. (Photo & Photo 2)

186. Scarce Stanley VICTOR 14-inch iron jack plane with original two-line VICTOR, MADE IN U.S.A. logo that was only used for one year, plane is complete and very good. (Photo)

187. Stanley 5 1/4 junior jack plane with 95 percent plus japanning, fine tote and knob, STANLEY lever cap with orange background, fine overall. (Photo)

188. Stanley VICTOR No. 1104 9-inch smooth plane, gray bed, red cap iron and frog, fine wood, complete and fine overall. (Photo)

189. MOUND CITY 9-inch smooth plane, tote painted black, hardwood knob, gray bed, good overall. (Photo)

190. Stanley No. 4 9-inch smooth plane, marked No. 4 on the toe, nice early-style tote, beaded knob, first type lateral lever, R&L-logo iron, BAILEY cap iron, very good overall. (Photo)

191. Vaughan & Bushnell No. 803C 8-inch iron smooth plane, fine original blade, nice tote and knob, fine overall. (Photo)

192. Stanley #3 iron smooth plane, fine BB-logo blade, STANLEY lever cap with orange background, tote has been broken and glued and has had the spur re-attached, knob chipped at base, with new wood it will be fine. (Photo)

193. Diamond Edge DEX220 iron block plane, complete with original blade, very good overall. (Photo)

194. Stanley #65 low angle block plane, R&L logo blade, traces of nickel on lever cap, good knob, very good overall. (Photo)

195. Stanley Four Square iron block plane, japanned bed and lever cap, good knob and BB-logo blade, lever cap marked STANLEY with the 4-Square logo, very good overall. (Photo)

196. EAGLE nickel plated sliding bevel with 9-inch blade, end of blade has nice KERSHAW BROS mark along with FEB 9, '92 patent date, complete and fine. (Photo & Photo 2)

197. Pair of rosewood handled sliding bevels: Henry Disston & Sons 8-inch with light pitting on blade, good overall; and and unknown make 6-inch with unusual screw and what appears to be a saw nut, very good. (Photo & Photo 2)

198. Pair of Stanley #18 sliding bevels: 10-inch blade with good nickel plating, fine overall; and a very good 8-inch model. (Photo & Photo 2)

199. Pair of fine rosewood handled sliding bevels: Stanley #25 with 6-inch blade, complete and fine; and an unmarked 6-inch model with decorative brass screw. (Photo & Photo 2)

200. RARE adjustable sweep ratchet brace, similar to a Millers Falls Barber Improved No. 97, sweep adjusted by loosening two set screws, this one can be set in six different positions. This is the first of this-style braces we have seen or sold. It retains most of the original nickel plating and the wood is fine. Highly recommended. (Photo & Photo 2 & Photo 3)

201. Stanley #44 bit & square level in original pasteboard box, a fine level in a very good box. (Photo & Photo 2)

202. Surveyor's style 11-ounce brass plumb bob with removable steel tip and top that unscrews, very good. (Photo & Photo 2)

203. Paul Hamler miniature 1/3-scale Sandusky rosewood center-wheel plow plane with white tipped arms. A accurate and functional miniature plane. (Photo & Photo 2)

204. Large, decorative 4 lbs. 3-ounce brass plumb bob, with new steel point, very good. (Photo & Photo 2)

205. Paul Hamler miniature 1/3-scale Marples Ultimatum brace 1/3-scale with great attention to detail. (Photo & Photo 2)

206. Preston-style 14-ounce brass plumb bob with steel point, very good. (Photo & Photo 2)

207. Paul Hamler miniature 1/3-scale Sargent "lady bug" rabbet plane, complete with fence and depth stop, a functional miniature, complete and fine. (Photo & Photo 2)

208. Decorative, contemporary 28-ounce brass plumb bob, fine. (Photo & Photo 2)

209. Paul Hamler miniature Stanley No. 44 gunmetal plow plane 1/3-scale, fine overall. (Photo & Photo 2)

210. Nice European brass plumb bob with wooden standoff and wooden string spool, very nice overall. (Photo & Photo 2)

211. Limited Edition #15 of 50 Paul Hamler 1/3-scale miniature of the M.B. TIDY Patented (U.S. # double beveling plane. One of the best of all the miniature tools made by one of the most talented miniaturist to ever make functional models of classic tools. (Photo & Photo 2 & Photo 3)

212. Stanley #45 combination plow plane Type 6 in original chestnut box with partial paper label, planes is very good and missing just the cam, beading stop and one spur, comes with original cutter box with partial label and nice set of cutters including a sash blade that is loose in the bottom of the box, and a slitter and one bade installed in the plane, a nice usable plane. (Photo & Photo 2)

213. Three IOB Stanley items: #49 Bit Gauge like new in very good box; #75 bullnose rabbet plane MADE IN ENG. fine in very good box; and #208 level glasses packed in saw dust in very good box. (Photo & Photo 2)

214. Pair Stanley #98 & #99 side rabbet planes, an early pair with no provision for depth stops, both are complete and very good. (Photo & Photo 2)

215. Pair of Stanley block planes in original boxes: #60 1/2 low angle, fine plane in a slightly worn box; and a scarce adjustable VICTOR BLOCK PLANE SPECIAL No. 1120, fine plane in a very good box. (Photo & Photo 2 & Photo 3)

216. Stanley #1951 fibre board beveling plane, complete and fine overall. (Photo & Photo 2)

217. Stanley #50 light duty plow plane with wooden handle, thumb operated blade depth adjuster, one blade included, very good. (Photo & Photo 2 & Photo 3)

218. Two Stanley planes IOB: Stanley #248 Weather Strip Plane, plane is very good and comes with extra 1/8-inch blade, box top has tear, and corners need to be retaped; and a late model #78 duplex plane, with blue paint, intact fence and rod, missing depth stop, planes is fine, box is OK but missing the label. (Photo & Photo 2 & Photo 3)

219. Stanley #46 skew bladed plow plane Type 2 with no provision for rear stop or slitter, comes with early cutter box filled with 10 nice blades plus one in the plane, box has hinged lid and spare spur stapled to side of box, plane has intact depth stop, and good auxiliary fence, top of handle spur chipped, and there is light surface rust on the rods and skates, very good overall. (Photo & Photo 2)

220. Scarce Stanley #54 light duty plow plane, with felt pouch containing 8 blade plus blade in plane, has an improper bolt holding the fence, but the threads are still OK (we tried the thumb screw in both holes), has proper fence, and the side of the body was never drilled out for the spare spurs, an unusual plane in very good overall condition. (Photo & Photo 2 & Photo 3)

221. Stanley #57 core-box plane with two sets of risers, original turnbuckle, fine SW-logo blade, nice beech tote and knob, has some light surface rust on top and bottom, nickel plating about 85 percent, will easily clean to very good overall condition. (Photo & Photo 2 & Photo 3)

222. Stanley S5 indestructible steel jack plane, partial decal remains on good rosewood tote, nice tall knob, 85 percent plus japanning, very good overall condition. (Photo & Photo 2)

223. Stanley #93 cabinetmaker's rabbet plane MADE IN ENG, has some light surface rust, blade has plenty of life left in it, will clean to very good usable condition. (Photo & Photo 2)

224. Stanley S4 indestructible steel smooth plane, partial decal remains on very good rosewood tote, nice tall knob, 90 percent plus japanning, some light surface rust, will clean to very good overall condition. (Photo & Photo 2)

225. Stanley #220 block plane NEW IN BOX with two inserts, one looks like a display card, and one is a pamphlet titled GOOD TOOLS MAME GOOD FRIENDS, a new plane in a fine box. (Photo & Photo 2)

226. Mini plane 1 7/8 x 7/16-inch brass rabbet plane, very good. (Photo & Photo 2)

227. Mini plane 1-inch by 1/4-inch brass instrument maker's plane with radiused bottom, fine. (Photo & Photo 2)

228. Large brass instrument maker's plane 2 3/4-inch x 1-inch with flat bottom and radiused blade, very good. (Photo & Photo 2)

229. Steel 8-inch inside or outside caliper, very good. (Photo & Photo 2)

230. Stanley pocket level with brass top, can be attached to a square. (Photo & Photo 2)

231. Nice 5-inch full figured pregnant "Lady Leg" caliper, very good. (Photo & Photo 2)

232. Small unmarked 3 1/2-inch English? spirit level with brass body and top, very good overall. (Photo & Photo 2)

233. Stanley Tools ICS folding knife with Millers Patent plow plane on handle, fine overall. (Photo & Photo 2)

234. Small brass patternmaker's shave with radiused bottom, very good. (Photo & Photo 2)

235. Stanley #46 pocket level with brass top, can be attached to a square, very good. (Photo & Photo 2)

236. Lufkin 041 12-inch, 3-fold steel scale or rule with original leather case. (Photo & Photo 2)

237. Lee Valley blind nail plane, very good overall. (Photo & Photo 2)

238. Miniature 2 1/4-inch x 1/4-inch brass rabbet plane, very good. (Photo & Photo 2)

239. Violin maker's brass thumb plane, sole radiused in both directions, very good. (Photo & Photo 2)

240. Brass plaque marked GASACCUMULATOR STOKHOLM PATENT DALEN No. 005, LBFX200. (Photo & Photo 2)

241. Brass plaque THE BABCOCK & WILCOX CO. Built For S.S. ROBIN WENTLEY, legend or data plate, very good overall. (Photo & Photo 2)

242. Adjustable beam micrometer, the spindle has two patent dates MAY 12-96 and APR. 13-97, both dates correspond to patents issued to J.T. SLOCOMB & CO. of Providence, RI, this one is complete and very good. (Photo & Photo 2)

243. Scarce Stanley #56 core-box plane, nice rosewood handle, very good V-logo blade, japanning is about 80 percent, and there is light to moderate rust on the inside where the japanning is missing, the outside is fine. (Photo & Photo 2 & Photo 3)

244. Child sized wooden saw buck and mini buck saw, both very good. (Photo & Photo 2)

245. Fine Stanley #85 scraper plane with original decal on tilting tote, fine SW marked blade, complete and fine overall. (Photo & Photo 2)

246. Stanley #278 rabbet and filletster plane, complete with 98 percent plus japanning, original decal on back of handle, intact fence and depth stop, fine overall. (Photo & Photo 2)

247. Stanley GAGE G6 fore plane with fine tote and knob, decal still on tote, complete and fine overall. (Photo & Photo 2 & Photo 3)

248. Stanley #40 scrub plane with decal still on tote, fine SW logo blade, fine overall. (Photo & Photo 2)

249. Stanley A78 aluminum duplex rabbet & fillester plane with decal still on handle, complete and fine. (Photo & Photo 2 & Photo 3)

250. Gurley Light Mountain transit. Weighs about 12 pounds it is a mountain transit. This transit has the straight A standards, made 1870s-1890s. Hard to tell, as they did not number their instruments until 1909. This instrument has its original finish and is in fine overall condition in the original dovetailed wooden box. (Photo & Photo 2)

251. Unknown make brass pantograph in nice lockable mahogany box, complete and very good. (Photo)

252. H. MORIN 11 RUE DULONG PARIS high post alidade, complete and very good overall. (Photo)

253. Nice plated Sheffield brace with beech body, very good overall. (Photo & Photo 2)

254. Two boxes filled with bitstock tools, one containing a set of 12 GREAVES & SONS center bits; the other containing four countersinks, a square tapered reamer, two screwdriver bits, two spade bits and a tiny center bit, all appear to have been made by GREAVES & SONS. One box has the owners initial C inlaid into the top; the other box has the owners initial L inlaid into the top, a fine set of bits by one maker. (Photo & Photo 2)

255. Mahogany and brass circular cutting gauge, most likely made in the U.K. complete and fine. (Photo & Photo 2)

256. Unusual S.F. BOWSER & CO. spiral screwdriver PAT. POOD FOR, FT. WAYNE, IND. with nice rosewood or cocobolo handle, very good overall. (Photo & Photo 2)

257. Heavy rosewood and brass marking and mortise gauge, most likely English, complete and fine. (Photo & Photo 2)

258. Stanley #74 flooring plane complete with original handle, one of the two beech handles in cracked, a rare one to find with the handle. (Photo)

259. Rosewood & brass marking and mortise gauge, fine points, very good overall. (Photo)

260. Fine set of three brass trammels each just 4 3/4-inches long, with nice removable steel points, a fine set on a mahogany beam. (Photo & Photo 2)

261. Lot of three 8-inch iron smooth planes: Stanley #3; Keen Kutter KK3 and a late model Keen Kutter K3 with KEEN KUTTER spelled out in lever cap, only the second of this model that we have seen, very good. (Photo & Photo 2)

262. Lot: Goodall iron smooth plane; Vaughan & Bushnell V&B No. 904 "Poor Man's Bedrock" smooth plane with flat sides, very good; a Sargent 106 Type 1 with gull-wing screw, very good; and a postcard with Birds Eye View of Sargent & Co.'s Factory, New Haven, Conn. (Photo)

263. Lot: Small Yankee 2H Handyman ratchet screwdriver; two offset Yankee screwdrivers: #3800 & #3500; two STANLEY YANKEE offset screwdrivers #3800 & #3400; a tie clasp with pair of dividers and a try square, very good; and a mini Craftsman block plane in gray and red paint, fine overall. (Photo & Photo 2)

264. RARE E.E. KING Patent (U.S. #430,656) quick-adjust nut wrench built on a patent issued June 24, 1890 to Erastus Edwin King of Lee's Summit, Missouri. This example is in good working condition, the logo on the side of the top jaw is barely visible due to nicks and dings, very good overall. (Photo & Photo 2)

265. Stanley No. 1001 "100 PLUS" screwdriver with SW logo on socket, very good. (Photo & Photo 2)

266. Early Allard's Patent Aug. 4, 1867 & Nov. 24, 1874 spiral screwdriver, complete and very good. (Photo)

267. Unusual Peerless CANILEVER screwdriver with fold down lever for added torque, first we've seen of this model, fine overall. (Photo & Photo 2 & Photo 3)

268. Unusual pair of early to mid 19th century grease horns, these were filled with fat or tallow and hung from the underside of a wagon. The contents would be used to grease the hub and axel. This is a very nice pair with a hand forged chain. (Photo & Photo 2)

269. This a small priming horn used to fill the priming pan on a flintlock weapon, it's similar to a regular powder horn only smaller. It has a leather strap and a large tooth or piece of bone also attached to the strap. (Photo & Photo 2)

270. J.RABONE & SONS No. 1612 5-foot ziz zag rule, 7/8-inch wide, fine overall. (Photo & Photo 2)

271. Wooden stair saw with closed handle, very good. (Photo)

272. DRING & FAGE LONDON 5-foot, 6-fold Imperial gallon boxwood & brass wantage rule, minor patches of staining, very good overall. (Photo & Photo 2)

273. Stanley #2 smooth plane, good V-logo blade, knob cracked from top to bottom, tote broken and glued, rear of throat has numerous chips, good overall. (Photo & Photo 2)

274. Stanley #4 2-foot, 2-fold carpenter's rule with drafting scales, has a repair on one edge where the receiving hole for the indexing pin broke out and was glued, nice early style arched joint, shows nicely. (Photo & Photo 2)

275. Unusual 7-inch by 1 1/2-inch brass rabbet plane, very good overall. (Photo & Photo 2)

276. Stanley No. 94 SW 4-foot, 4-fold, brass-bound carriage maker's rule, the name and SW logo are a bit faint and there is some staining on the outside, good overall. (Photo & Photo 2)

277. Nice low angle brass block plane with wooden wedge, cast body, good overall. (Photo & Photo 2)

278. Stanley #2 Three Angle Rule Tool, made on U.S. Patent No. 999,899 issued to W.H. Stanley, attaches to a regular sized folding rule, this one is marked with the patent date on one side and STANLEY on the other side, very good with intact level. (Photo & Photo 2 & Photo 3)

279. Unusual BIRMINGHAM 6-inch iron block plane with unusual blade adjuster, intact lever cap, light pitting on blade, very good overall. (Photo & Photo 2)

280. LASTON MAKER, 25 OLD COMPTON ST SOHO LONDON 2-foot, 2-fold rule with long inch increments, nice brass slide and arched joint, steel tips, former owner L.B. initials tastefully stamped into one side, one indexing pin MIA, very good overall. (Photo & Photo 2)

281. Brass 5 1/2-inch block plane with 1 1/2-inch blade, replaced walnut wedge, very good overall. (Photo & Photo 2)

282. VICTOR three angle rule tool, similar to the Stanley #2 in lot 278, complete and very good with intact level vial. (Photo & Photo 2 & Photo 3)

283. Unusual hat maker's brim cutter, very good overall. (Photo & Photo 2)

284. Wooden stair saw with open handle, very nice. (Photo)

285. Brass router plane 5 1/4 X 1 1/2-inch, 1/4-inch blade can be mounted in either the center or on one end, very good overall. (Photo & Photo 2)

286. Pair of 4 1/2-inch brass trammel points, very good overall. (Photo & Photo 2)

287. Brass 3 1/4-inch router plane with 1/4-inch blade, very good overall. (Photo & Photo 2)

288. Fine Hoff Patent (U.S. #2,065,492) DIAMOND QUICK LIGHTING GASOLINE IRON NO. 7 manufactured by The Akron Lamp Company on a patent issued Dec. 22, 1936 to Chester A. Hoff of Akron, Ohio. This one is complete with instructions, tin filler can, wrench. The only thing missing is the original box. (Photo & Photo 2 & Photo 3)

289. Unknown make sad iron with quick release tilted handle, complete and very good. (Photo & Photo 2)

290. 'I WANTU' COMFORT IRON STRAUSE GAS IRON CO. PHILA. PA. U.S.A. stand or trivet for sad iron, very good overall condition. (Photo & Photo 2)

291. Decorative sad iron from the WYETH hardware of ST. JOSEPH MO, some pitting on top of iron, very nice wooden handle with name and location stenciled on sides, very good overall. (Photo & Photo 2)

292. Mahoney Tug Boat polishing iron, with MAHONY and TROY NY marked on the top, waffle pattern on bottom, very good. (Photo & Photo 2)

293. Albrecht Patent (U.S. #169,327) IMPROVED ECLIPSE XX hand cranked fluting machine with built-in clamp for attaching to table or bench top, NOV. 2, 1875, JULY 3, 1877 RE-ISSUED MAR.23, 1880, very good overall condition. (Photo & Photo 2)

294. ROSENBAUM M'F'G. CO. 'UNEEDIT' GAS IRON NEW YORK stand or trivet for sad irons, complete and very good. (Photo & Photo 2)

295. Scottish brass box iron with wooden handle, brass gate in rear with brass lifter, needs a small slug inside, will be a nice piece with some cleaning and restoration. (Photo & Photo 2)

296. THE BEST rocking fluter by C.W. WHITFIELD SYRACUSE, N.Y. PAT APP'D. FOR, very good overall. (Photo & Photo 2)

297. Unknown make sad iron with quick-release handle, the base of the handle is stamped sheet metal rather than cast iron, some light rust, very good overall. (Photo & Photo 2)

298. Jeavons & Whittaker Patent (U.S. #996,087) Stove Attachment, essentially a heating platform for heating sad irons over a gas stove, marked on bottom PAT'D JUNE 27, 1911, made on a patent isssued to William Jeavons and Arnold Whittaker of Cleveland, Ohio, complete and very good. (Photo & Photo 2)

299. G.H. OBER Patents (U.S. #688,432 & #1,021,344) sad iron, made on a patents issued Dec. 10, 1901, to George Ober of Chagrin Falls, Ohio, and MAR 26, 1912 to George Wait of Chagrin Falls, Ohio, this one is complete and fine. (Photo & Photo 2)

300. F.M. GREENLEAF LITTLETON N.H. "walking" log caliper, with intact 10-spoke wheel, complete and very good. (Photo & Photo 2)

301. Stanley #2 iron 7-inch smooth plane, NOS T-logo blade, a few cracks at base of good knob, nice tote, very good overall. (Photo)

302. Stanley BEDROCK #604 FT with nice BB-logo blade, STANLEY lever cap, stained hardwood tote and knob, very good overall. (Photo)

303. Sargent #410C wide body smooth plane, beaded low knob, nice tote, very good overall. (Photo)

304. Stanley No. 1105 4-SQUARE iron jack plane, complete with FOUR SQUARE blade, fine overall. (Photo)

305. Pair of wide body jack planes: OHIO TOOL 05 1/2C with nice globe-logo blade, tote spur MIA, hang hole at tote, very good overall; and a UNION MFG. CO. No. 5A with wide front knob, tote spur chipped on top, well used iron, very good overall. (Photo)

306. Stanley BEDROCK FT #605 1/2C, good SW logo blade, nice rosewood tote and tall knob, most japanning is gone, nice STANLEY BEDROCK lever cap, will make a great user or restoration project. (Photo)

307. DIAMOND EDGE DE7 iron jointer plane with cracked knob, nice hard rubber tote, good original blade, very good overall. (Photo)

308. Stanley BEDROCK #606C FT iron fore plane, scuffed but intact tall knob, nice tote, SW blade, STANLEY lever cap, very good overall. (Photo)

309. Stanley #8C iron jointer plane, nice SW logo blade, nice tote and tall knob, very good overall. (Photo)

310. Sargent #422 (same size as Stanley #7) iron jointer plane, early horseshoe lateral lever, beaded knob, circular logo on blade, nice tote, very good overall. (Photo)

311. Stanley #8 iron jointer plane, STANLEY lever cap with orange background, fine BB logo blade, fine tote and knob, fine overall. (Photo)

312. Stanley BEDROCK FT #607 iron jointer plane, nice V-logo blade, fine tote and tall knob, BEDROCK lever cap, fine overall. (Photo)

313. Stanley BEDROCK FT #608C iron jointer plane, V-logo iron, nice tote and tall knob, japanning about 60 percent, very good overall. (Photo)

314. Two iron block planes: Unusual Ohio Tool Co. #018 7-inch iron block plane with knuckle jointed lever cap, Stanley blade, former owners initials in right side, good overall; plus a Stanley #9 1/2 that is complete and fine. (Photo)

315. Stanley #3C Type 11 iron smooth plane, complete and very good. (Photo)

316. Pair of iron block planes: Chaplin Patent with adjustable throat, some minor chipping in rear of throat, very good overall; and a Stanley 7-inch with adjustable throat, patent date in rear of bed and on top of lever cap, very good. (Photo)

317. Ohio Tool? #03C corrugated iron smooth plane, lateral lever to Stanley's first style, has Stanley SW blade, otherwise very good overall. (Photo)

318. Stanley #18 1/4 6-inch iron block plane with knuckle jointed lever cap, complete and fine. (Photo)

319. MARSH M3 iron smooth plane, nice low knob, tote spur MIA, nice original blade, very good overall. (Photo)

320. Unusual Millers Falls #47 7-inch low angle block plane with knuckle jointed lever cap, nice unmarked blade, complete and very good. (Photo)

321. VAUGHAN & BUSHNELL #703 iron smooth plane, fine original tote and knob, nice original blade, fine overall condition. (Photo)

322. Stanley #60 low angle block plane with nickel plated lever cap and screw, complete and fine. (Photo)

323. Stanley FOUR SQUARE No. 1104 iron smooth plane, gray paint, in bed, red frog, nice original blade, very good overall. (Photo)

324. DEFIANCE by Stanley #1248 low angle block plane, complete and fine. (Photo)

325. Pair of iron bench planes: Stanley #4 1/2 wide body iron smooth plane, good Q-logo blade, nice low knob, and early-style tote, very good overall; and a UNION MFG CO No. X5 iron "vertical post" iron jack plane, nice original blade, tote broken and glued, scuffed but intact low knob, good overall. (Photo)

326. Stanley #120 Type? with six-pointed star lever cap, early blade with patent date, nice knob, very good overall. (Photo)

327. Stanley BEDROCK RT #605 1/2C wide body jack plane, good BB-logo blade, good low knob, tote spur MIA, STANLEY BEDROCK lever cap, very good overall. (Photo)

328. Stanley #18? 7-inch iron block plane with knuckle jointed lever cap, SW logo on cap, nice BB logo blade, very good overall. (Photo)

329. Stanley BEDROCK FT #606C iron fore plane, good SW logo blade, nice tall knob, tote broken at base and glued, BEDROCK lever cap, very good overall. (Photo)

330. Pair of UNION iron block planes: 7-inch marked UNION in rear of bed, UNION MFG CO. blade, very good overall; and a 6-inch with unusual throat adjustment lever, UNION MFG CO. blade, fine overall. (Photo)

331. OHIO TOOL CO. #06C iron fore plane, good hardwood tote, rosewood low knob, THISTLE BRAND PAT APPL'D FOR blade, very good overall. (Photo)

332. Pair of Stanley 6-inch #9 1/2 iron block planes; one has the "HANDY" indented sides and one does not, both are complete and fine. (Photo)

333. Stanley BEDROCK FT #606C iron fore plane, near new BB logo blade, good low knob, tote spur has been broken off and glued back on, STANLEY R&L CO BEDROCK lever cap, 60 percent plus japanning, very good overall. (Photo)

334. Unusual DEFIANCE 6-inch stamped or pressed steel block plane, marked blade, very good overall. (Photo)

335. OHIO TOOL CO. #327C iron fore plane, THISTLE BRAND PAT APPL'D FOR blade has light pitting on top, good tote and low knob, very good overall. (Photo)

336. Pair of Stanley block planes: #203 with nice knob, good V-logo blade, some staining on sides and bottom, very good overall; and an early #102 with number cast into bed, early Rule & Level logo blade, very good overall. (Photo)

337. Stanley BEDROCK FT #606C iron fore plane, STANLEY lever cap chipped at bottom, nice V-logo blade, very good usable condition. (Photo)

338. Nice Kent style axe, good handle, very good overall. (Photo)

339. Early blacksmith-made iron trivet, pitted, good overall; and a clicker die, complete and very good. (Photo & Photo 2)

340. Early hewing axe with applied cutting edge, moderate to heavy pitting, handle much newer than the blade, very good overall. (Photo)

341. Lot of four precision tools from a machinist tool box: MITUTOYO depth gage, dial caliper type, 0 to 6-inch range, in original case, very good; LUFKIN 1662V 1 to 2-inch micrometer, satin finish, marked ENG LAB on back, in a Mitutoyo hard case, very good; Double Scale Ideal Indicator in original pasteboard box; and a STARRETT 440B micrometer depth gage, fine condition in tatty box. (Photo & Photo 2)

342. Wooden compass plane that has interesting bow tie repairs to both sides to reattach the bottom half of the rear end. (Photo & Photo 2 & Photo 3)

343. Lot of four tape measures: WARDS MASTER No. 4079 6-FEET, very good; TUFBOY Bright Blade by MASTER RULE MFG. good overall; TUFBOY No. 306 6-foot, complete and fine; Evans THIN 6 FT. 6 1/4W PUSH-PULL WHITE-TAPE like new with original advertising sheet in original hard plastic box. (Photo & Photo 2)

344. Sugar nippers with intact spring, very good overall. (Photo & Photo 2)

345. Lot of five smaller tape measures: JUNIOR 3 FEET, kink at 3/4-inch mark, good overall; COLE 36-inch with keychain; HANCOCK CONCRETE PRODUCTS CO., HANCOCK, MINN; with metric and English graduated tape; LUFKIN 60-inch with a few kinks along the first few inches; and a BALDWIN PATHFINDER 6-foot, good. (Photo & Photo 2)

346. Scarce Stanley #6 Type 3 fore plane with correct beaded knob, has a later chip breaker, no chips, cracks, or pitting, japanning is mostly gone, good overall condition. (Photo & Photo 2)

347. Early Stanley #8, Type 2 jointer plane with 90 percent plus japanning, beehive blade and 1867 chip breaker, sides are OK, proper beaded knob, and nice though likely not original tote, very good overall. (Photo & Photo 2)

348. Late Stanley #112 cabinet scraper in original box, plane has dried grease or Cosmoline on the exposed surfaces, plane is like new, box is very good with a nice label.

349. Set of three Atkins No. 401 ship point hand saws with near perfect etch, rosewood handles, all three are complete and fine. These three were found together in a small tool chest. The bottom of the chest was lined with one of the original box tops which is included in the sale. (Photo & Photo 2 & Photo 3)

350. Nice Carpathian walnut cabinetmaker's tool chest, with bank of drawers, saw till, lockable drawer that slides out of base on one side, there are four holes on each side that indicate that there were handles mounted at one time, currently there are hand holds on each side, two of the panels on the top are cracked, comes with a set of keys for the intact locking lid, a nice looking chest that can be used to store part of your collection. (Photo & Photo 2)

351. Set of six Stanley EVERLAST chisels in original canvas punch, three still have original decals on the handles, all six chisels are fine. (Photo & Photo 2 & Photo 3)

352. J.FROST, NORWICH ebony and brass miter square, some light rust and former owner's name struck in three places, some light rust on the blade, will clean to very good overall condition. (Photo & Photo 2)

353. Cast iron CARBORUNDUM SHOE CUTTERS STONE #621 base with stone, these were made for people working in the shoe industry, complete and very good. (Photo & Photo 2 & Photo 3)

354. Unusual E.P. JOHNSON RULE MFG CO. micro adjusting marking gage, complete and in very good overall condition. (Photo & Photo 2)

355. Stanley #18 1/2 block plane with 95%+ japanning, fine nickel on knuckle jointed lever cap, fine BB-logo blade, fine overall. (Photo)

356. Stanley #60 1/2 low angle block plane with nickel plated lever cap, nice BB-logo blade, intact throat adjusting cam, fine overall. (Photo)

357. Stanley Four Square No. 1120 iron block plane in gray paint with STANLEY name and 4-Square logo in lever cap, original blade marked FOUR SQUARE, small chip from front of lever cap, otherwise very good. (Photo)

358. Pair of rules: Stanley #62 1/2 brass-bound 4-fold rule, no indexing pins, outside a bit faint, good overall; and a Stanley #73 4-fold with arched joint, worn outside, indexing hole on edge is wallowed out, good overall. (Photo & Photo 2)

359. Pair of Stanley rules: #82 2-foot, 4-fold with early arched joint, brass-bound, has board scales on inside, very good; and a #76 brass-bound, 2-foot, 4-fold rule, very worn on outside and one leg warped, good overall. (Photo & Photo 2)

360. Three 4-fold rules: C-S Co. #70 2-foot, 4-fold, indexing pin hole on edge is wallowed out, very good; Chapin Stephens Co. #72 2-foot, outside worn and indexing pins missing, good; and an unknown make #67 2-foot, 4-fold with round joint, indexing pins missing, outside worn good. (Photo & Photo 2)

361. Lot of four Stanley rules: #72 2-foot, 4-fold with square joint, some staining outside, very good; #76 2-foot 4-fold with arched joint, complete and fine; #79 2-foot 4-fold with square joint, board scales inside, worn outside and has chip from edge, good; and a Stanley #36 1/2 caliper rule, complete and very good. (Photo & Photo 2)

362. Pair of cigar clippers, one with mother of pearl on one handle, the other is marked R.A. STEWART CIGAR STORE, both very good. (Photo & Photo 2)

363. Pair of Stanley 3-foot, 4-fold rules: Scarce Stanley #66 with unusual scales inside, very good to fine; and a #66 3/4, brass-bound with SW logo, inside indexing pin holes wallowed out, very good. (Photo & Photo 2)

364. Lot of four rules: Stanley #68 2-foot 4-fold, fine; H. CHAPIN #11 U.S. STANDARD 2-foot 4-fold, faint outside, good; H. CHAPIN #11 U.S. STANDARD, a few small spots of staining, very good; and a Chapin Stephens Co. #52 PAT DEC. 22, 1891, very good. (Photo & Photo 2)

365. Pair of Stanley rules: Stanley #58 2-foot, 4-fold rule, faint outside, missing indexing pins, good; and a scarce Stanley #62 brass-bound SPECIAL 2-foot, 4-fold with metric scales on the outside and English on the inside, a few spots of staining, good overall. (Photo & Photo 2)

366. Three brass-bound Stanley rules: #52 2-foot, 4-fold with arched joint, faint outside, no indexing pins, good; Stanley #54 2-foot, 4-fold stained inside and out, good; and a Stanley #60 2-foot, 4-fold, with double arched joint, very good. (Photo & Photo 2)

367. Three Stanley rules: #61 2-foot, 4-fold, very good; #61 1/2 2-foot, 4-fold, very good; and a brass-bound #62 1/2, 2-foot, 4-fold with staining inside and out, good. (Photo & Photo 2)

368. Pair of tape measures: MASTER No. 408, 8-foot STREAMLINE, the first 5 inches have several kinks, the case is fine; and a LUFKIN 10-foot C9210 new in original box, tape and case are fine, box has minor wear. (Photo & Photo 2)

369. Four Stanley rules: Stanley #66 3/4 brass-bound 3-foot, 4-fold rule, later arched joint, very good; Stanley SW #66 3/4 slight warping, good; Stanley #61 SW complete and fine; and a #72 1/2 brass-bound 2-foot, 4-fold worn on outside, good inside. (Photo & Photo 2)

370. Three 12-inch 4-fold rules: #70 worn but intact, good; #70 very good; and Stanley #57 complete and very good. (Photo & Photo 2)

371. Three 12-inch 4-fold rules: Stanley #69 faint outside, inside pins MIA, good; #3C brass-bound caliper rule, missing indexing pins, very good; and Stanley #69, stained inside and out, one leg cracked. (Photo & Photo 2)

372. Three Stanley tape measures: #1266A 6-foot with blued case, very good; #7466 6-foot; and #6386 6-foot, small spot of rust on back of case, very good. (Photo & Photo 2)

373. Three tape measures: DITZGEN "IDEA TAPE" 36-inch, worn finish on case and kink in few few inches of tape; Lufkin 36-inch tape graduated in inches on one side and metric on other side, very good; and GERMANY 1-meter Ferrand-type tape, fine. (Photo & Photo 2)

374. Three tape measures: Stanley #1210W, worn tape; GERMAN 6-foot tape in BAKELITE case; and MIGET MEAURE 3-foot. (Photo & Photo 2)

375. Three tape measures: VERON CO. 6-foot advertising tape HAYS KANS.; FARRAND 6-foot; and DUNLAP 6-foot, worn. (Photo & Photo 2)

376. Central Tool Co. MADE IN GERMANY brass inside/outside caliper rule, very good; and a small draftsman's rule, very good overall. (Photo & Photo 2)

377. SMALLWOOD unmarked 4-fold boxwood rule that was never graduated inside or out, also not drill for indexing pins, unusual. (Photo & Photo 2)

378. Stanley #78 1/2 2-foot, 2-fold, brass-bound, boxwood rule with double arched joints, indexing pins missing and moderate wear, very good. (Photo & Photo 2)

379. Unusual ROBERTS, CUSHMAN & CO. NEW YORK 5-inch hatter's rule with brass slide and scales on back, slight warping, very good. (Photo & Photo 2)

380. Set of nine blades for Millers Patent plow planes in a custom made wooden box, a few blades have mild pitting, very good. (Photo)

381. Cook's 30-inch level Patent Dec. 7, 1886, made by Davis & Cook, very good. (Photo)

382. Early 28 1/2-in. Stanley #25 level, complete and very good. (Photo)

383. Stratton Brothers #2, 26-inch plumb & level, mahogany stock, very good; plus a Stanley #0, 24-inch plumb & level, with cherry stock, FINE. (Photo)

384. Pair of Disston saws: The one on top has a NOV. 2, 1909 patent date on the blade that applies to the detachable handle, it is in fine overall condition; the one on the bottom has a etch that his harder to read but it is a Disston that has teeth on both the top and bottom edges of the blade, very good. (Photo)

385. Stanley #39 1/2 machinist level, SW logo in top plate, complete and fine, plus a pair of Stanley #2 brass trammels complete with original pencil holder, fine. (Photo & Photo 2)

386. U.S. Calvary M1912 picket pin in original leather sheath, very good overall. (Photo & Photo 2)

387. Scarce 8-inch Estes Patent (U.S. 1,153,050) handle adjusting nut wrench, complete and fine, built on a patent issued Sept. 7, 1915 to William Estes of Ozark, Missouri. (Photo & Photo 2)

388. Vandegrift Patent 6-inch screw-adjust nut wrench, plus a PLANET JR. cast iron wrench that would have been sold with the Planet Jr. garden cultivators, this one is very good. (Photo & Photo 2)

389. Pair of ACME wire-handled pocket or bicycle nut wrenches one with twisted handle and one with loop handle, both very good. (Photo)

389. OPEN.

391. Stephens & Co. #036 combined rule, level and bevel, the bladed is rusted in place and dinged up others trying to pry it out, stained on one side, good overall and comes with a nice felt pouch. (Photo & Photo 2)

392. Stanley #86 1/2 architect's 2-foot, 4-fold ivory and German silver rule, has had two legs broken and repaired near the joint. (Photo & Photo 2)

393. Nice Buck Patent (U.S. #1,120,443) LUFKIN No. 2071 3-fold rule with level, brass binding on top edge, intact level, very good overall. (Photo & Photo 2)

394. Unusual Indian or Indonesian combined rule and folding knife with ivory or bone handles, very good. (Photo & Photo 2)

395. Stanley #44 bit and square level, complete and very good. (Photo)

396. Diamond Edge watch fob, complete with leather band, like new; plus a LUFKIN 1-foot, 3-fold steel rule advertising NEWMAN'S, very good. (Photo & Photo 2)

397. Unknown make ivory parallel protractor with rollers, fine overall. (Photo & Photo 2)

398. ROE'S PATENT (July 1, 1890) protractor and square with original sleeve, fine overall. (Photo & Photo 2)

399. Mini E.C. ATKINS SILVER STEEL SAW bracelet charm, very good. (Photo & Photo 2)

400. RARE and possibly unique Keen Kutter No. 88 had saw with large bust of E.C. SIMMONS etched into blade near handle, likely made a presentation piece for a trade show or perhaps even the big Keen Kutter display at the 1904 World's Fair in St. Louis. This saw is complete and fine. (Photo & Photo 2)

THE END.

NOTE: A 10 percent buyer's premium will be charged at this sale. In addition we will collect a 5 percent Massachusetts State sales tax from anyone who does not provide written proof of having a Tax ID number.



Sale Managed by Michael J. Urness &
Great Planes Trading Co.

www.GreatPlanesTrading.com

Phone 314-434-4325

email: Ratdaddy@mac.com