2nd Annual Humboldt Antique Tool Auction

(From the Cecil Holmes collection of Hudson, Iowa)

May 5, 2007

Humboldt Fairgrounds Building (Events Center)

Humboldt, Iowa 50548

 

 

1. Bedrock 604 ½ FS smooth plane (Photo)

2. Bedrock 604C FS plane ( Photo)

3. Stanley Gauge G5 jack plane (repaired) (Photo)

4. Bedrock 604C RS smooth plane (Photo)

5. Stanley S4 smooth plane ( Photo)

6. Union No. X5C “vertical post” jack plane (Photo)

7. Stanley #113 SW circular plane (Photo)

8. Stanley #13 type circular plane (Photo)

9. Stanley No. 46 Type 3 w/3/8” blade & dated slitter (Photo)

10. Stanley No. 55 combo plane with cutters (Photo)

11. Five zig zag rules ( Photo)

12. Stanley #94 carriage maker’s 4-ft. folding rule (Photo)

13. Eight assorted boxwood rules (Photo)

14. Stanley #87 ivory rule (cracks) (Photo)

15. Unknown 12” ivory rule ( Photo)

16. Stanley #87 ivory rule (cracks) (Photo)

17. Pair handled Ohio Tool T&G planes (Photo)

18. M. Copeland wooden dado plane w/wooden stop (Photo)

19. Three wooden planes inc. Continental grooving plow (Photo)

20. Unmarked 29 ¾” early plumb & level (mahogany?) (Photo)

21. FINE 28” Stratton Bros. No. 1 plumb & level (Photo)

22. Stanley #95 SW mahogany plumb & level (DSCN0001.jpg) & (Photo)

23. VG Stanley #95 plumb & level (Photo) & (Photo)

24. Goodell-Pratt #4328 double plumb & level (Photo)

25. E. Simpson 22-in. #10 plumb & level (Photo)

26. Streeter patent 1867 brace (Photo)

27. Nobels’ 1865 patent brace (Photo)

28. FINE Stanley #923-8 in. ratchet brace (Photo)

29. Fray & Co. Spofford Patent #110 brace (Photo)

30. Backus patent split-shell chuck brace (Photo)

31. All-iron brace with spring chuck ? Wilcox Low??? (Photo)

32. Yankee #2100 -14 in. ratchet brace (Photo)

33. Lot of three iron duplex planes (Photo)

34. Millers Falls #85 duplex plane (Photo)

35. Stanley #90 steel cased rabbet plane (Photo)

36. Stanley “Household Jack Plane” (Photo)

37. Gage #4? transitional smooth plane (Photo)

38. Chaplin’s improved #205 smooth plane (Photo)

39. O.R. Chaplin’s T&L block plane (Photo)

40. Chaplin’s improved patent iron block plane (Photo)

41. Ohio Tool – 26 in. transitional jointer plane (Photo)

42. Keen Kutter KK32 26” transitional jointer plane (Photo)

43. Stanley Bedrock #608C RS jointer plane (Photo)

44. Stanley Bedrock #608 FS jointer plane (Photo)

45. Stanley #92 Butt & Rabbet gage + 1 (Photo)

46. Stanley #1 mkg. gage & 93 butt & rabbet guage (Photo)

47. Lot of 3 mkg gages, 1 rosewood (Photo)

48. Double beam marking gage & unmarked panel gage (Photo)

49. Pair of early Stanley wooden levels (Photo)

50. Pair of Stanley alum levels – 18” & 24” (Photo)

51. Chapin 12 in. wooden level & 10” Stanley 102 (Photo)

52. Stanley No. 34 8” shaft level (Photo)

53. Davis Level & Tool 6” inclinometer level (Photo)

54. Davis Level & Tool Co. #1 inclinometer level (Photo)

55. Three wood mallets inc. bung driver? (Photo)

56. Barnes Worcester wedge-arm filister plane (Photo)

57. Ohio Tool Co. #96 ½ screws-arm plow plane (Photo)

58. Millers Falls #2 hand drill & JOIC Clawson drill (Photo)

59. Defiance & Tiger Tool hand drills (Photo)

60. Ixion & Fulton hand drills (Photo)

61. Yankee #445 multi-speed hand drill (Photo)

62. Yankee #1545 ratching hand drill (Photo)

63. Chaplin’s improved – 24” joiner plane (Photo)

64. Chaplin’s Patent T&L 24” joiner plane (Photo)

65. Stanley Bedrock #607C FS joiner plane (repainted) (Photo)

66. Stanley Bedrock #607 FS joiner plane (Photo)

67. Chaplin’s Patent jointer plane with iron handle (Photo)

68. Chaplin’s patent #1207 jack plane (Photo)

69. Stanley #95? plumb & level (Photo)

70. Stratton Bros. #1 – 28” mahagony plumb & level (Photo)

71. Stratton Bros. #1 – 28” mahagony plumb & level (Photo)

72. Stanley #95 28” brass bound plumb & level (Photo)

73. Akron “Eclipse” #4 ½ brass-bound plumb & level (Photo)

74. Disston #90 plumb & level with paper label Photo

75. Stanley #23 cherry mason’s level + Davis Cook (Photo)

76. Davis #3 inclino & Davis/Robinson #9 (parts levels) (Photo)

77. Keen Kutter 24” plumb & level (Photo)

78. Stanley Bedrock #604 ½ FS (repaired) + #4 Type 11 (Photo)

79. Stanley Bedrock #603C FS & Stanley #4-½C (Photo)

80. Nice Stanley #6C fore plane (Photo)

81. Stanley #4½ Type 17 jumbo smooth plane (Photo)

82. Stanley Bedrock #603 FS smooth plane (Photo)

83. Stanley #2 (cracked side) otherwise fine (Photo) & (Photo 2)

84. Fulton #3708 (number 2 size) smooth plane (Photo) & (Photo 2)

85. Chioce of 12 bevels inc. 12” Stanley & 2 Sargent’s Pat. (Photo)

86. Pair of machinist’s 12” shaft levels (one needs vial) (Photo)

87. Unusual brass shaft level (Photo)

88. Three shaft levels + 6” iron level (2 need vials) (Photo)

89. NICE 9” brass shaft level Photo

90. Pair shaft levels inc. #34 Stanley 10” & 8” L.S.Starrett (Photo)

91. Four wooden mallets

92. Eight outside calipers (Photo)

93. Lot of 11 assorted calipers, dividers etc. (Photo)

94. C.E. Jennings 10” folding handled draw knife (Photo)

95. A.J. Wilkensen folding handled draw knife (Photo)

96. Five socket firmer chisels, two by Rockford (Photo)

97. Pair of breast drills inc. Goodall-Pratt (Photo)

98. Millers Falls chain drill (Photo)

99. to 101. TBA.

102. Large L.S. Starrett surface gauge Photo

103. Shop made surface gauge (Photo)

104. Lufkin #520 surface gauge (Photo)

105. Shop-made surface gauge (Photo)

106. P.S.&W. breast drill (Photo)

107. Unknown 2-speed breast drill (Photo)

108. Mohawk breast drill & G-P chain drill (Photo)

109. Millers Falls angle boring attachment & Yankee brace (Photo) & (Photo 2)

110. Fray #120 brace w/Barbor chuck + Fray Spofford (Photo)

111. Fray #108 Spofford brace with Stanley SW logo + 1 (Photo)

112. FINE Yankee 2100-10” ratchet brace (Photo)

113. L.S. Starrett #220 satin finish micrometer IOB (Photo)

114. Starrett 2” to 12” inside mic set (Photo)

115. Lufkin inside mic set in wooden box (Photo)

116. Wm. Koenig Troy, New York toolmaker’s square IOB (Photo)

117. Starrett S167C radius gage set & #237 depth gage (Photo)

118. Starrett #11 6” combination set IOB (Photo)

119. Five assorted Starrett tools IOB (Photo)

120. Four Lufkin machinist tools IOB + Nork Wiggler (Photo)

121. RARE Federal Tool Co. Chicago #2028 inclinometer level (Photo)

122. Helb Railroad, Penn. inclinometer level (Photo)

123. Unusual Sherman pitch adjusting level (Photo)

124. Orr & Lockett “The Downey Level” inclinometer (Photo)

125. Pair heavy duty E.C. Stearns C-clamps (Photo) & (Photo 2)

126. Two pair pliers inc. 6 ½” Channel Locks (Photo)

127. Six assorted needle nose & end cutting pliers (Photo)

128. Two pair L.S.Starrett #235 5 ½” end cutters (Photo)

129. Wynn lasting pliers + 8” end cutters (Photo)

130. Pair L.S. Starrett 7” end cutters (Photo)

131. Three assorted pliers inc. lineman’s type (Photo)

132. Three block planes inc. Keen Kutter #65 Marks’ patent Photo

133. Stanley #120 plane w/5-pt. star cap + later #120 (Photo)

134. Three block planes: early Stanley 110, 130 & DEX220 (Photo)

135. Four Stanley block planes: early 102, 103, Defiance… (Photo)

136. Seven assorted hammers: ferriers, mason’s, ball peen (Photo)

137. Seven claw hammers inc. one hand forged (Photo)

138. Large Belkamp (Bluegrass) 1961 hardware catalog (Photo)

139. Machinist’s handbook 11th edition (1942) (Photo)

140. Choice: six machinist’s catalogs inc. Brown & Sharpe (Photo)

141. Choice of nine Starrett machinist’s tool catalogs (Photo)

142. Set of three rabbet planes - #190, #191, #192 (Photo)

143. Three #78 duplex planes inc. Stanley #78 & Union (Photo)

144. Four iron block planes inc. Stanley #9 ½, 110, 220 (Photo)

145. Three block planes inc. unusual #130 & Stanley #118 (Photo)

146. Three iron block planes inc. Chaplin’s T&L & Fulton (Photo)

147. Three block planes: Stanley #18, 118, 9 ½ Photo

148. Stanley? Whimble brace (Photo)

149. English gent’s brace accepts flat-tang bits (Photo)

150. Lowentrout patent wrench/brace (Photo)

151. Wooden Sheffield brace with brass trim (Photo)

152. Iron frame geared hand drill accepts flat-tang bits (Photo)

153. Stanley #982 corner brace with Barber chuck (Photo)

154. Disston D8 hand saw 5 tpi thumb-hole (Photo)

155. Early H. Disston hand saw 8 tpi with split nuts (Photo)

156. Atkins Perfection 24” 10 tpi hand saw (Photo)

157. Disston & Sons #12 20” hand saw 10 tpi (Photo)

158. Disston & Sons D8 5 ½ tpi 26” w/thumb hole handle (Photo)

159. H. Disston 25½ “ hand saw with split nuts (Photo)

160. Wm Cook Glasgow 25” hand saw with split nuts (Photo)

161. Scarce P.B. Fraley & Co. #5 Phila. 26” hand saw (Photo)

162. Unusual steel cased rabbet plane w/brass bottom (Photo)

163. Early Stanley #46 combination plane w/3/8” cutter (Photo)

164. Stanley S5 steel jack plane (Photo)

165. Pair Stanley planes inc. Defiance & Victor #1104 (Photo)

166. Pair smooth planes: Stanley Two-Tone & Hudson Forge (Photo)

167. Stanley 5 ¼ & Stanley 4 ½ bench planes (Photo)

168. Stanley Bedrock 604 1/2C FS jumbo smooth plane (Photo)

169. Stanley 5 ¼ junior jack plane & Stanley Bedrock 604 (Photo)

170. Stanley 5 ¼C junior jack plane (Photo)

171. Stanley #4 ½ jumbo smooth  plane (Photo)

172. Scarce Stanley Bedrock 605 ¼ jack plane (Photo)

173. Black Raven embossed single-bit axe (Photo) & (Photo 2)

174. Kelly Registered 1912 single-bit axe #2749 (Photo) & (Photo 2)

175. Ashland “G” embossed double-bit axe Ashland, WI (Photo) & (Photo 2)

176. Plumb “Auto Graf” embossed double-bit axe (Photo) & (Photo 2)

177. RARE Kretschmer & Tredway Lincoln embossed axe (Photo) & (Photo 2)

178. Keen Kutter #4 double bit axe with original handle (Photo) & (Photo 2)

179. Craftsman Golden Jubilee 1886-1936 single-bit axe (Photo) & (Photo 2)

180. Lot of three unusual long-handled hammers (Photo)

181. Wheeler Madden & Clemson brass-back saw + Disston (Photo)

182. Pair breast drills inc. Bolton A-1 & Millers Falls (Photo)

183. Pair Goodell-Pratt multi-speed hand drills (Photo)

184. Pair multi-speed breast drills inc. Wards Fray pat. (Photo)

185. Millers Falls #97 ratcheting multi-speed breast drills (Photo)

186. Stanley #1 “Odd -jobs” (Photo)

187. Two 12” cast iron levels (Photo)

188. Stanley #36 9” level + 6” Richardson level (Photo)

189. Pair Stanley 6” #39 ½ level (Photo)

190. Pair iron levels inc. 8” jack level & 9” L.S.S.Co. (Photo)

191. Unknown 10-in. cast iron & brass precision level IOB (Photo)

192. Shop made surface gauge (Photo)

193. Pair surface gauge inc. one L.S.Starrett (Photo)

194. Pair shop made surface gauge (Photo)

195. Four assorted handled scrappers inc. Starrett & Stearns (Photo)

196. Three combination squares inc. Defiance & Stanley (Photo)

197. Four push drills & Yankee Handyman screwdriver (Photo)

198. Unusual Goodall-Pratt #707 combination square + 2

199. Diamond Edge #150 28” 5 1/2 tpi hand saw

200. RARE Foss Patent smooth plane (Photo) & (Photo 2)

201. Stanley #10 ¼ tilting handle rabbet plane (repaint) (Photo) & (Photo 2)

202. Bailey smooth adj. smooth plane with “Battle Axe” blade (Photo) & (Photo 2)

203. Unusual angle measuring device, artilliary? (Photo)

204. Starrett #13 double square + similar Lufkin. (Photo)

205. Three small machinist combination squares. (Photo)

206. Eight claw hammers + two Stanley hammer heads (Photo)

207. Three iron braces inc. two Spofford patents (Photo)

208. Three gent’s or penny braces (Photo)

209. Set of assorted auger bits in wooden box (Photo)

210. Barlett’s patent bit box with set of misc. auger bits (Photo)

211. Five assorted bearing scrapers + 2 sets trammels ()

212. Four Stanley #82 handled scrapers

213. Nicholl’s #50 handled scraper

214. Starrett #124 inside mic set IOB (Photo)

215. Starrett #445 depth mic set IOB (Photo)

216. Starrett #120 dial caliper and depth gauge

217. Starrett combination set IOB (Photo)

218. Unusual level – steam engine? IOB (Photo)

219. Starrett #436 0-1” left handed micrometer (Photo)

220. Three boxed Starrett items inc. #453E square (Photo)

221. Diamond Edge (ACME) 26” pitch adjusting level (Photo) & (Photo 2)

222. Davis patent #9 M.W.Robinson 24” plumb & level (Photo) & (Photo 2)

223. SCARCE Chapin-Stephens Vogel’s patent level 24” (Photo) & (Photo 2)

224. Davis #4, 24” fancy filigree inclinometer level (Photo) & (Photo 2)

225. SCARCE 24” Goodall-Pratt alum level (Photo) & (Photo 2)

226. Starrett inside micrometer set in wooden box (Photo)

227. Starrett inside micrometer set in wooden box (Photo)

228. Starrett depth micro #445 complete in wooden box (Photo)

229. Starrett #436 3” micrometer IOB w/satin finish

230. Brass transit or builder’s level in wood box (Photo) & (Photo 2)

231. Nickel plated transit with iron leg set (Photo) & (Photo 2)

232. Starrett #99-B transit in original wood box (Photo) & (Photo 2)

233. Stanley #48 level stand (Photo)

234. Stanley #48 level stand with provision for legs (Photo)

235. Large auger bit (needs handle) (Photo)

236. Two Stanley try squares, #95 butt gage & grease gun (Photo)

237. Stanley #45 combo plane Type 7 IOB w/cutters (Photo)

238. Navy Mk3 #1 gun sighting quadrant & wooden box (Photo)

239. Builder’s transit in wood box with legs & plumb bob (Photo) & (Photo 2)

240. Keen Kutter K88 26” 8tpi hand saw (Photo)

241. Disston D-7 26-in. 8 tpi hand saw (Photo)

242. Early Starrett combo set w/ removable level, 24” scale (Photo)

243. Unusual 24” calipers (Photo)

244. Stanley 4-ft. mason’s level with plumb opening & iron bob (Photo)

245. Starrett inside mic set in original wood box (Photo)

246. Starrett #122 vernier caliper (Photo)

247. Starrett #436 7” micrometer in wood box (Photo)

248. Starrett #995 universal precision gauge IOB (Photo)

249. Bedrock #606C & Stanley #3 smooth plane (Photo)

250. Bedrock #606 & Stanley 4C smooth plane (Photo)

251. Bedlock #605 & Stanley #3 smooth plane (Photo)

252. Bedrock #605½C & Stanley #3 smooth plane (Photo)

253. Stanley #11 belt plane (Photo)

254. Stanley 11 ½ floor plane (Photo)

255. Stanley #12 scraper (Photo)

256. Stanley #12 ½ scraper w/rosewood bottom (Photo)

257. Stanley #112 scraper plane with #32 toothing blade (Photo)

258. Stanley #5 ½C + Stanley 5C jack plane (Photo)

259. Stanley #40½ scrub plane (Photo)

260. Stanley #5½ & Stanley 3C smoth plane (Photo)

261. Stanley #6C & Bedrock #605C jack plane (Photo)

262. Schultes level 24” #11-24 iron plumb & level (Photo) & (Photo 2)

263. L.S. Starrett 24” cast iron plumb & level (Photo) & (Photo 2)

264. Williamsburg Mfg. 12” filigree level (corner chip) +1 (Photo) & (Photo 2)

265. NICE Starrett tool kit with combo square, calipers, scale… (Photo)

266. Starrett #361 draftsman’s protractor IOB (Photo)

267. Three drafting sets inc early Dietzgen (Photo)

268. Bedortha 30” level & Stanley 30” rosewood level (Photo) & (Photo 2)

269. Stratton Bros. 30” brass bound mahogany level (Photo) & (Photo 2)

270. Scarce Hall & Knapp #3 mahogany plumb & level (Photo) & (Photo 2)

271. Stanley #30 28” double plumb & level (Photo) & (Photo 2)

272. Early 26 ½” plumb & level with brass top plate (Photo) & (Photo 2)

273. Disston Morss 26” mahogany level, decorative brass (Photo) & (Photo 2)

274. Stanley #6C & Bedrock #605 jack plane (Photo)

275. Stanley #6 & Stanley #5 ½ planes (Photo)

276. Stanley #5-½ & Bedrock #605-½ jack planes (Photo)

277. Pair 4-ft. wooden furniture clamps (Photo)

278. One 54” wooden furniture clamp (Photo)

279. Six rafter/framing squares inc. Eagle, P.S.&W. (Photo)

280. Six rafter squares inc. Eagle, Nicholls, Stanley

281. Lot of ten try squares inc. several by Stanley

282. Stanley #33 26” transitional jointer plane (Photo)

283. Yankee #75 “Lightening Brace” (Photo)

284. Foundryman’s thermometer [measures to 1000 degrees] (Photo)

285. Stanley hatchet & Stanley #37½ butt marker (Photo)

286. Two Stanley #5 jack planes + #48 T&G (broken) (Photo)

287. Choice of seven dividers (Photo)

288. Stratton Bros. 26” #1 brass bound mahogany level (Photo)

289. Stanley 26” rosewood double plumb & level (Photo)

290. Scarce P. Quigley Newark, NJ mahog. plumb & level (Photo)

291. System. X Sam-A-7 18” brass telescope Ord. Corps. (Photo)

292. Beam micrometer 53” with Starrett #263 head (Photo)

293. Lester Micrometer Co. #A-12113 56” beam mic (Photo)

294. Lester Micrometer Co. 40” beam micrometer (Photo)

295. Pair of micrometers: Slocomb 5-6 in. & B&S #38 1” (Photo)

296. Nice 25” double caliper + crude homemade caliper (Photo)

297. Six draw knives inc. Barton, Swan & L&IJ White

298. Shop-made surface gage with pointer (Photo)

299. Surface gage w/brass base, Starrett scale (Photo)

300. Stanley #72 chamfer plane [repainted] (Photo) & (Photo 2)

301. Stanley #10 ½ carriage makers rabbet plane (Photo) & (Photo 2)

302. Scarce Stanley #10 1/2C carriage maker’s rabbet plane (Photo)

303. S.Biggin & Sons Sheffield 26” hand saw + 1 (Photo)

304. H.S.B. “WILL SAW” 26” 5 ½  tpi hand saw (Photo)

305. Unusual 26” hand saw with graduated back (Photo)

306. Athol 18” shaft level & C.F. Richardson 9” level (Photo) & (Photo 2)

307. C.F. Richardson 6” iron level (Photo) & (Photo 2)

308. Goodall-Pratt 18” iron level (Photo)

309. Athol Machine Co. 12” shaft level w/pitch adj. (DSCN9775.jpg)

310. Athol 9” shaft level & Starrett 8” shaft level (Photo)

311. Goodell-Pratt bench hack saw June 20, 1899 (Photo)

312. Stanley #150 miter box & Beardshaw brass-back saw (Photo)

313. Unusual “Patent Applied For” 2-speed breast drill (Photo)

314. Yankee #545 ratcheting breast drill (Photo)

315. A.H. REED archimedian screwdriver (Photo)

316. Unknown #64 short throw brace 6” sweep (Photo)

317. Stanley #928 6” ratchet brace (Photo)

318. H.S.B & Co. 10” ratchet brace (Photo)

319. Unknown “patent applied for” ratchet brace (Photo) & (Photo 2)

320. Anthony Patent (#569,597) boring machine/drill 1896 (Photo)

321. NICE Stanley Miller’s patent #143 (Photo)

322. Stears patent 9” smooth plane (Photo)

323. Pair Chaplin’s planes #1207 jack & 6” block plane (Photo)

324. Stanley #8C joiner plane (Photo)

325. Stanley #7 joiner plane (Photo)

326. Stanley #8 & #7C joiner planes (Photo)

327. Lufkin Rule Co. 56” “Minnesota Standard” log cane (Photo)

328. Like new - Lufkin 36” log cane. (Photo)

329. Brown & Sharpe combo set w/4 attachments. (Photo)

330. SCARCE Chaplin patent combination square w/ 9” scale (Photo)

331. Large Chaplin patent combination square w/ brass scale (Photo)

332. Try square 16” blade, built in level, rosewood handle (Photo)

333. Three shaft levels inc. 8” Starrett & 8” Goodall-Pratt

334. Stanley #3 24” plumb & level + Disston 24” level (Photo)

335. Early Stanley 22” plumb & level (Photo)

336. Peerless Pat. July 8, 1919 mason’s level (Photo)

337. Glass Developments Ltd, London 18” iron level (Photo)

338. Davis Level & Co. 12” inclinometer level (Photo)

339. Stanley SW #2 tri-square with 18” blade (Photo)

340. Stanley #39 7/8” dado plane (Photo)

341. Stanley #39 ½” dado plane Type I (Photo)

342. Stanley #39 3/8” dado plane  (needs blade) (Photo)

343. FINE Chaplin Improved 8” corrugated smooth plane (Photo) & (Photo)

344. Millers Falls #182 drill/brace (DSCN9879.jpg)

345. Millers Falls ratcheting auger handle (DSCN9879.jpg)

346. Yankee #1550 ratcheting breast drill (Photo)

347. Unusual extendable double-bevel threshold? Gage (Photo)

348. M.Engel #210 Witchita, KS brass level wood box

349. Starrett cross test level

350. Nice Mathieson “Scotch” brace with spring chuck (Photo)

351. Goodell-Pratt auto-feed breast drill (Photo)

352. Lowentraut Patent brace/wrench (complete) (DSCN9886.jpg)

353. Patented 54” railroad level 11-11-24 (DSCN9887.jpg)

354. New Lufkin rules; #42 ship bevel, #372 caliper & #751. (Photo)

355. Caliper rules (4); Stanley 3, 32, Lufkin 388, & Stephens 99. (Photo)

356. Three 24-in. rules inc. Stanley #1, 15 & Preston 1167. (Photo)

357. Six Stanley 4-fold rules inc: VG 61, 62, 62C & 84. (Photo)

358. Four 4-fold rules inc. C-S #7 NEARSITE & Stanley 78 1/2. (Photo)

359. Five rules inc. Stanley 1, 62 METRIC, 72 1/2 SW & 78 1/2 SW. (Photo)

360. Log caliper marked 1881. (Photo)

361. FINE Stanley #95 30-in. brass-bound mahogany level. (Photo)

362. Peterson Patent 26-in. level Marinette, Wisconsin. (Photo)

363. Four Stanley & one K&E shrink rules, five total. (Photo)

364. Three 24-in. rules inc. Stanley 34 & 34V + Lufkin. (Photo)

365. Fine 4-foot Maine log stick with brass ends. (Photo)

366. VG 4-foot wantage or gauging rod with brass ends. (Photo)

367. Pair early lumber sticks inc. 4-ft. octagonal. (Photo)

368. Stanley #72 chamfer plane, early model, VG. (Photo)

369. Stanley 2C smooth plane, handle overhang broken. (Photo)

370. FINE Stanley #194 fiber board beveling plane. (Photo)

371. Calhoon Victor, Missouri pat. combo bevel/level/square. (Photo)

372. Ebony slitting gage; rosewood marking & mortise gage. (Photo)

373. Four marking & mortise gages inc. Stanley #77. (Photo)

374. Four smooth planes: Stanley 3C, Sargent 409, Shelton 04. (Photo)

375. Sargent #81 side rabbet plane. (Photo)

376. Stanley 100 & 100 1/2 mini block planes. (Photo)

377. Stanley #40 scrub & #192 rabbet planes. (Photo)

378. Lot of 9 different marking gages. (Photo)

379. Topp's Patent Framing Tool, square/bevel. (Photo)

380. Stanley 264 1/2 marking gage & #77? marking & mortise gage. (Photo)

381. VG Stanley #30 angle divider; & a #1 Odd Jobs head. (Photo)

382. Ebony & brass Ultimatum-style marking gage & a General gage. (Photo)

383. Stanley #93 shoulder plane. (Photo)

384. Stanley #92 (English) & #90 planes. (Photo)

385. Stanley #98 & #99 side rabbet planes. (Photo)

386. Stanley #10 carriage makers rabbet plane, with hang hole. (Photo)

387. Stanley #2 smooth plane. (Photo)

388. Sargent #407 (#2 size) smooth plane. (Photo)

389. Gilbert #2 size smooth plane (Sargent made). (Photo)

390. Stanley BEDROCK 603 (FS) smooth plane. (Photo)

391. Klinglesmith 1877 Pat. bevel/square St. Louis. (Photo)

392. SCARCE Lufkin counter top zig-zag rule display case. (Photo)

393. Lufkin WHITE CLAD rules store display. (Photo)

394. Nine (9) different wooden marking gages. (Photo)

395. Stanley #198 Mortise gage. (Photo)

396. Three wooden planes inc. two coachmaker types. (Photo)

397. Three wooden planes inc. toothing. (Photo)

398. Four wooden horn planes. (Photo)

399. Five wooden planes inc. smoothers & compass. (Photo)

400. Eight boxwood rules inc. Lufkin 2062 w/level. (Photo)

401. Five boxwood rules inc. #61, 62, 54 & 68. (Photo)

402. Five brass-bound boxwood rules inc. 62C & Merit 162. (Photo)

403. Seven boxwood rules inc. four caliper rules. (Photo)

404. Stanley BEDROCK 604C (FT) smooth plane. (Photo)

405. Stanley 10 1/2 carriage maker's rabbet plane. (Photo)

406. Stanley #112 scraper plane & #2 smooth plane (users). (Photo)

407. Winchester 9777 marking gage + Stanley #90 & #91 gages. (Photo)

408. Sargent #7 (Stanley #2 size) smooth plane. (Photo)

409. VG Siegley #4C iron smooth plane. (Photo)

410. Bridge Tool Co. St. Louis #2 smooth plane. (Photo)

411. Three block planes inc. Sargent, KK, Defiance. (Photo)

412. Nice wedge locking mahogany panel gage. (Photo)

413. Stanley #92 butt & rabbet gage + #65 marking gage. (Photo)

414. RARE & nearly complete Fales Patent plow plane. (Photo & Photo 2)

415. Norvell-Shapleigh 1903 hardware catalog [blue cover]. (Photo)

416. Shapleigh Hardware 1915-1915 hardware catalog. (Photo)

417. Shapleigh/Keen Kutter 1942 catalog. (Photo)

418. Shapleigh 1935 hardware catalog #400. (Photo)

419. Box lot of EAIA Chronicle magazines. (Photo)

420. Box of assorted MWTCA &: EAIA catalog reprints inc. Weiss, Stanley, Disston, Stanley. (Photo)

421. Box of early MWTCA Gristmill Magazines. (Photo)

422. Box of hardware store catalog reprints inc. Keen Kutter, Jennings, Sargent, Feron&...(Photo)

423. Box assorted woodworking & cabinetmaking books. (Photo)

424. Shapleigh 1929 Catalog #350. (Photo)

425. Shapleigh 1900 Hand Book & 1915 mini-size pamphlet. (Photo)

426. Shapleigh Hardware 100 Years of Growth booklet plus A.F. Shapleigh photo (from Shapleigh estate). (Photo)

427. Scarce Shapleighs Hand Book plus three Want Books; Keen Kutter, Diamond-Edge, Witte Hardware... (Photo)

428. Two Sligo Iron Store (St. Louis) catalogs. (Photo)

429. Lufkin Basic Measuring Tools display board & assorted tapes. (Photo)

430. Box of assorted EAIA Shavings magazines. (Photo)

431. Box of assorted catalog reprints inc. Zenith, Barnes, Winnie… (Photo)

432. Architectural Rendering book plus reprint Osborne, Barnes, Sandusky catalogs. (Photo)

433. Books: American Axes; Wooden Planes in 19th Century America; + a Buck & Hickman reprint. (Photo)

434. EAIA 1933 to 1958 hard bound; & Ken Roberts’ Tools For The Trades And Crafts books. (Photo)

435. Box of misc. catalogs inc. Schlitt Supply, Colorado Lapidary Supply, Stanley, etc. (Photo)

436. Simmons Hardware Co. 1899 catalog [nicely rebound]. (Photo)

437. Simmons Keen Kutter catalog “V” 1935. (Photo)

438. Simmons Year Book “Keen Kutter” catalog “K” 1913 [soft cover]. (Photo)

439. Simmons Hardware Co. Catalog “F” 1903. (Photo)

440. Mahogany display case, 30-3/4” wide x 24” deep x 41-3/4” tall. Legs are 8-1/2” tall. Glass display area is 14” high. There are 4 drawers under display area accessible from the back. Display area is accessible from the back by two sliding doors with mirrors. (Photo & Photo 2)

441. Oak display case 36” long, 17-1/2” depth. 9” tall in the front and 13” tall in the back. Has three drawers on the back. Accessible from the back and slides out. (Photo)

442. Oak display case 29-3/4-in. long, x 10-3/4-in. depth x 14-in. tall. Accessible from the back by a drop down door with mirror. (Photo)

THE END.



 

 

Sale Managed by Michael J. Urness

314.434.4345

www.GreatPlanesTrading.com       email: Ratdaddy@mac.com


Greg Kastli Auctioneering

319-234-0051

www.Kastliauctions.com       email: Kazzcam@aol.com