6th Annual HUMBOLDT IOWA ANTIQUE TOOL AUCTION, March 7, 2011.

This auction features the Arlet and Sandra Cassaidy collection of Waterloo, Iowa. This is a collection of fine Stanley tools and other patented planes Anyone who knows Arlet knows he has an eye for the exotic and unusual and above all for quality. This auction features Stanley tools we have never seen before and a few Sargent and Union planes that we have not previously seen or sold. There are more Stanley tools in original boxes that we've ever had in a single sale. In addition to the Cassaidy collection, we'll be selling the tool collection of the late Pete Waters of Waterloo, Iowa; and a number of wooden planes, marking gages and layout tools from a large Minnesota collection. There is something in this auction for just about any tool collector or dealer.

001. Stanley BAILEY #6C Type 11 fore plane with good rosewood tote and knob, very good V-logo blade, very good overall. (Photo & Photo 2)

002. Stanley BEDROCK 605 1/2C jumbo jack plane with fine rosewood tote and tall knob, good T-logo blade, very good overall. (Photo & Photo 2)

003. Pair of Stanley bench planes inc. #5C jack plane, needs the screw that secures the blade to the chip breaker, otherwise very good; plus a #4 with S casting mark, good wood, very good overall. (Photo & Photo 2)

004. Four iron spokeshaves: early Stanley #60 with R&L logo blades, very good overall; Stanley #51 with replaced? cap; Seymour Smith double shave (similar to Stanley #60) and a smaller unmarked shave with stippled cap, all are complete and very good. (Photo & Photo 2)

005. Two drawknives: a D.R. BARTON cooper or carriage maker's shave with 7-inch blade, fine overall; plus a well-made hand forged shave with 8 1/2 inch blade made from old rasp or file. (Photo & Photo 2)

006. Two drawknives: a Keen Kutter with 4-inch blade, very good overall; plus a pony shave by PEXTO, very good. (Photo & Photo 2 & Photo 3)

007. Stanley #113 compass or circle plane with flexible bottom for planning concave or convex surfaces, Q-logo blade, very good overall. (Photo & Photo 2)

008. Four wooden molding planes: Chapin? twin-iron 1 1/4 inch nosing plane; two A.C. BARTLETT'S OHIO PLANES dado planes (one coated in lacquer) and an OHIO TOOL jack rabbet, the spur on the right side is broken in half, otherwise fine. (Photo & Photo 2)

009. Union X4 smooth plane this one has a bent lever cap screw, but it is otherwise complete and very good; plus a Stanley #40 scrub plane with SW-logo blade, tote spur has been re-shaped, very good overall. (Photo & Photo 2)

010. HUNT & WISEMAN ST. LOUIS, Mo screw-arm fillester plane, boxwood arms, nuts and boxing, the throat appears to have been altered; plus an unmarked plow plane with wedge-locking arms, one wedge is broken, otherwise very good. (Photo & Photo 2)

011. Stanley #95 edge trimming block plane, with SW logo blade, complete and very good. (Photo & Photo 2)

012. Three nickel plated Stanley try squares with 12-inch; 8-inch and 4-inch blades, all are very good. (Photo)

013. Pair of iron bullnose rabbet planes: Keen Kutter K75 (made by Stanley) and a Millers Falls, both are complete and very good. (Photo & Photo 2)

014. Small 4-inch rosewood stuffed brass shoulder plane marked JOHN KING on both the side and on the rosewood wedge. There is a $235 price tag on this one which leads us to be believe it a contemporary make. (Photo)

015. DAVIS & LESTER Southampton MA ca 1850 *** (very rare) 5/8-inch dado with wooden depth stop secured by a wooden screw, complete and very good. (Photo & Photo 2)

016. Nice brass plumb bob with knurled top; plus a steel bob that is just about the same size and weight. (Photo & Photo 2)

017. Pair of nice STEARNS clapboard siding gauges, both are complete and could be put back into service. (Photo)

018. Scarce mason's cast iron plumb bob, 12 oz., still has traces of mortar on it, very good overall. (Photo & Photo 2)

019. LUFKIN No. 590, 25 foot steel gauging tape, reel and 7-inch brass plumb bob, these are used to gauge in liquid tanks, railroad tank cars, and barges, complete and very good. (Photo & Photo 2)

020. Unusual set of 4 1/2-inch copper or brass trammel points, on a 2-foot wooden beam, very good overall. (Photo & Photo 2)

021. C.S. Osborne & Co. leather slitter with infilled brass handle, and having the first marked C.S. Osborne blade we've ever seen. (Photo & Photo 2)

022. Fine 6-inch brass trammels with steel tips, on a nice 23-inch rosewood beam, fine overall. (Photo & Photo 2)

023. Nice 6-foot sliding inside rule with brass ends and brass clamp, early looking numbers, could be a Stanley No. 360 extension stick, very good overall. (Photo)

024. Fine set of wooden trammels on a nice 30-inch beam, the moving point is 8 inches long overall. (Photo)

025. Scarce Wm. C. ROSS , 37 LIGHT ST. BALTO * 1849-69 toothing plane with fine BUTCHER SHEFFIELD 2-inch blade, fine overall. (Photo & Photo 2)

026. Early Stanley 30-inch No. 11 rosewood level, with brass corners and brass side views, early type 2 circular logo 1860-69) on brass top plane, a few typical dings and chips, but very good overall. (Photo & Photo 2)

027. Unusual GRIFFIN REVENNA Ohio ca 1850-60 ** (rare), handled moving filletster, with intact nicker, and depth stop, fine overall condition. (Photo & Photo 2 & Photo 3)

028. Stanley VICTOR #111 28-inch plumb & level with rosewood stock, complete with brass corners, top plate and side views, very good overall. (Photo & Photo 2)

029. Nice LYON & SMITH CINt OHIO ca 1849-53** (rare), panel raising plane with moving fence on bottom and one on the side, GARDINER 3 1/2-inch iron, complete and in very good overall condition. (Photo)

030. L.B. WATTS Cambridge Mass. 1847-60, 24-inch plumb & level with mahogany stock, nice makers mark with eagle boldly struck on top of stock, brass corners and top plate, both vials intact, fine overall; plus another L.B. WATTS plumb and level that has been sawed off to 19 inches, the plumb vial is MIA, this one has the makers name and eagle struck on the brass top plate, put this hardware on a new stock and it will be fine. (Photo & Photo 2)

031. J. BURKE MADISON, IA (Indiana) *** (very rare) ca 1850 panel raising plane with moving fence on bottom and one on the side, one ear is chipped and there are typical checks and dings, boldly struck makers mark, very good overall. (Photo)

032. Nice Thos IBBOTSON 1/2-inch lock mortise chisel, 22 1/2-inch long overall, very good usable condition. (Photo & Photo 2)

033. GLEAVE OLDHAM ST. MANCHESTER wedge-arm sash filletster, with double dovetailed boxwood boxing, rare two brass screw operated depth stops, intact nicker and nicker wedge, some bruising to the wedge otherwise fine. (Photo & Photo 2)

034. I. SORBY 1/2-inch lock mortise chisel, 15 1/2 inches long overall, fine overall condition. (Photo & Photo 2)

035. JOHN BELL, PHILAD. ca 1829-51, screw arm sash plane, with wood screws that separate and hold open the two halves, complete and fine. (Photo & Photo 2)

036. Unusual wooden hag's tooth router with good blade held by a clamp, fine overall. (Photo & Photo 2)

037. N. CHAPIN & CO. EAGLE FACTORY ca 1838-50's, unhanded screw arm plow plane, boxed fence, a few minor thread chips, one blade included, very good overall. (Photo & Photo 2)

038. R. A. PARRISH PHILADA.* ca 1807-45, wooden combination match plane, for 1/2-inch stock, maker's mark faint, but plane is complete and very good. (Photo & Photo 2)

039. Stanley #45 Type 12 combination plow plane, includes all three main sections, three depth stops, good rosewood handle, knob and wear strip on fence, very good overall. Buy lot #551 and you will have a whole set. (Photo & Photo 2)

040. Scarce STAR TOOL CO. cam locking marking gauge, complete and in very good overall condition, a scarce gauge in fine overall condition. (Photo & Photo 2)

041. Stanley #45 combination plow plane TYPE 2 japanned body, fancy floral casting, fence is milled on both sides so it can be reversed, good rosewood handle and knob, long rods, one of the brass screws that secures the sliding section is MIA, very good overall. (Photo & Photo 2)

042. Stratton Bros. 30-inch brass bound mahogany plumb & level, both vials intact, nice stock, fine overall. (Photo & Photo 2)

043. S.S. BARRY N. YORK, * ca 1827-44, ogee complex moulding plane, 1 3/4-inch wide iron, marked 5/8 on heel, complete and fine. (Photo & Photo 2)

044. Cook's Patent 28-inch plumb & level made by Davis & Cook, Watertown, NY, both vials intact, nice rosewood stock fine overall condition. (Photo & Photo 2)

045. J. DAWSON, MONTREAL twin iron complex moulding plane, good boxwood boxing; one cutter many not be original to the plane, very good overall. (Photo & Photo 2)

046. J.W. HARMON BOSTON, MASS 24-inch mahogany plumb & level, both vials intact, complete and in very good overall condition. (Photo & Photo 2)

047. ROWELL & GIBSON ALBANY ** 1824-28 (rare) moving filletster plane with screw operated depth stop, complete and fine. (Photo & Photo 2)

048. Nice hag's tooth or old woman's tooth wood router with very good 3/8-inch blade held by big brass wing nut on the back, fine overall. (Photo)

049. J. DAWSON, MONTREAL complex moulding plane, with reverse ogee marked 7/8 on heel, original blade, good overall. (Photo & Photo 2)

050. SCARCE leather roll containing 30 different FLATHER SHEFFIELD brace bits, among them are: 12 center bits; two spade bits; two countersinks; screwdriver bit; tapered reamer; and 12 spoon bits, one of the smaller spoon bits is bent. It is nearly impossible to find a set like this all by the same maker. (Photo & Photo 2)

051. Scarce Stanley #5 1/4C corrugated junior jack plane, this one has been broken and welded at the throat, a very good usable plane. (Photo & Photo 2)

052. Scarce Sandusky #3S corrugated 9-inch smooth plane, has original blade with 1868 date, lever cap has a brazed repair and the tote spur is broken, otherwise complete and good. (Photo & Photo 2)

053. Gage OVB No. 4 smooth plane, 75%+ japanning, fine rosewood tote and tall knob, OVB cutter and lever cap, very good overall. (Photo & Photo 2)

054. Stanley #131 double ended block plane, intact yoke, complete and very good overall. (Photo & Photo 2)

055. Stanley #S18 malleable steel block plane, fine plating on knuckle cap, fine overall. (Photo & Photo 2)

056. Stanley #17 block plane, R&L logo blade, very good overall. (Photo & Photo 2)

057. Keen Kuttter K4 1/2C (early Bedrock frame) heavy smoother, tote broken and glued otherwise complete and fine. (Photo & Photo 2)

058. Scarce HANDYMAN 16-ounce hammer with nail holder on back of socket, no model number visible, good original handle, very good overall. (Photo & Photo 2)

059. KEEN KUTTER 10-ounce claw hammer, complete and very good overall. (Photo & Photo 2)

060. RARE D. MAYDOLE polished adz eye hammer with 60%+ original sticker on original handle, as good as they get. (Photo & Photo 2)

061. Early Stanley #12 scraper with AUG. 31, '58 patent date on brass adjuster nut, 75%+ japanning, NO BLADE, very good overall. (Photo & Photo 2)

062. Stanley #5 Type 5 first lateral, good T-logo cutter, early style tote missing splinter from left side of spur, good beaded knob, very good overall. (Photo & Photo 2)

063. Stanley BEDROCK #605C FT, pitted body and lever cap, poorly repainted, can be restored to usable condition. (Photo & Photo 2)

064. Stanley #924 14-inch fine rosewood wrist handle and top handle, 85%+ plating, fine overall condition. (Photo)

065. Stanley #146 3/8-inch tongue & groove or match plane, 90%+ plating, both cutters present, fine overall condition. (Photo)

066. Pair of Stanley ratchet braces: one is an unmarked DEFIANCE and the other is marked STANLEY on the frame and has the SW logo on the chuck shell, both are fine. (Photo)

067. Stanley #147 5/8-inch tongue & groove or match plane, 80%+ plating, the tongue cutters is the wrong size, very good overall. (Photo)

068. Scarce YANKEE #2101-W Whimble ratchet brace PAT NOV. 6, '23; and JAN. 15, '25, complete and fine. (Photo)

069. Stanley #149 7/8-inch tongue & groove or match plane, SW logo on tongue cutter, complete and fine overall. (Photo)

070. Union No. X5C corrugated 14-inch vertical post jack plane, good original blade, 90%+ japanning, tote spur missing a sliver, good knob, very good overall. (Photo & Photo 2 & Photo 3)

071. Stanley #62 low angle bench plane, intact throat cam, fine tote and low knob, STANLEY blade, fine overall. (Photo & Photo 2 & Photo 3)

072. Union No. X5 vertical post jack plane, 90%+ japanning, good original blade, nice knob, tote broken in middle and missing spur, very good overall. (Photo & Photo 2 & Photo 3)

073. Scarce UNION TOOL CO. #413 compass or circle plane (like Stanley #20) with 85%+ japanning, LAKESIDE blade, former owners name in left side, very good overall. (Photo & Photo 2 & Photo 3)

074. Stanley #40 1/2 scrub plane, 80%+ japanning, T logo blade, lever cap has been broken and welded, very good tote and tall knob, very good overall. (Photo & Photo 2 & Photo 3)

075. Stanley #90 steel cased rabbet plane, has patent date in top, throat never messed with, compete and very good. (Photo & Photo 2 & Photo 3)

076. Unusual Yankee #90 screwdriver 33-inch overall length, made on Leopold & Fegley Patent (U.S. 1,041,451) assigned to North Brothers Mfg., part of original decal remains on handle, fine overall condition. (Photo & Photo 2)

077. Scarce Stanley #31 Angle Divider with rodwood body, nice nickel plating, fine overall. (Photo & Photo 2)

078. Fine Stanley HURWOOD SW screwdriver 27 1/4-inch overall length, fine overall condition. (Photo & Photo 2)

079. Scarce Stanley #21 1/2 combination square, made in 1932 only, this one has the 9-inch blade and it is fine. (Photo & Photo 2)

080. Aiken patent tool handle, full of bit and a wrench to work the chuck, complete and very good; John S. Fray awl with no bits; and a Stanley SW logo awl with full set of bits, very good overall. (Photo)

081. OPEN.

082. Three tractor or implement wrenches. From top to bottom: H911; C111; and IH 1059B all are complete and very good. (Photo)

083. Three tractor or implement wrenches. From top to bottom: W&B No.1 double ended alligator: AMERICAN SAW CO. #1 alligator; #814 with square cut-outs, all are very good. (Photo)

084. IRON AGE cut-out wrench, complete and very good. (Photo)

085. Large 14-inch implement wrench marked on one side DISC and on the other 217, complete and very good overall. (Photo)

086. Another 14-inch implement wrench marked K29 on one side and graduated in inches on the other side for measuring furrows and/or fuel. (Photo)

087. Three different buggy or vehicle wrenches, all are complete and very good. (Photo)

088. Two implement or tractor multi wrenches; one is marked with a P inside a circle and with an 0, it is complete and very good; the other is an IH and has the part number P1599 it too is very good. (Photo & Photo 2)

089. Four nut wrenches; BARCALO BUFFALO 1 1/16 & 1 1/8; a CHAMPION S wrench; a W&B 1-inch and 7/8 S wrench; and a hand forged double ended wrench made out of an old rasp or file, very good. (Photo)

090. Four implement wrenches: #95; IH with some pitting; double ended S wrench with some pitting; and a FAMOUS OHIO J276, complete and very good. (Photo)

091. Lot of 10 misc. wrenches, some are cast and others are stamped. (Photo)

092. Unmarked corner brace with 98%+ plating and fine wood, like new condition. (Photo)

093. Scarce L. Bailey #61 adjustable spoke shave, blade marked L. BAILEY, BOSTON, PATENT JUNE 19, 1866. (Photo & Photo 2)

094. Hand rail shave with brass stop and boxwood wear section, reversible and can be used in either direction, 10 1/2 inches long overall, very good. (Photo)

095. European screw-arm filletster plane, 2-inch iron, 11 inches long overall, very good. (Photo & Photo 2)

096. David Flather & Sons, Solly Works, Sheffield, 1856-1900 improved brass plated brace, brass medallion in ebony head, No. 65 button pad, fine overall. Will go great with the full set of bits in Lot #50. (Photo & Photo 2)

097. Wooden D router, tiger maple and mahogany, 8 inches with 3/8-inch iron, a beautiful piece. (Photo & Photo 2)

098. Scarce Sargent #24C Shaw's Patent jointer plane, 85%+ japanning, fine tote and beaded knob, fine overall. (Photo & Photo 2)

099. Stanley BEDROCK 608C RT, little original japanning remains, fine rosewood tote and low knob, T logo blade, will make a fine user. (Photo & Photo 2)

100. Sargent #14 Shaw's patent jack plane, correct blade and lever cap, missing lateral lever, tote looks like an improper replacement, beaded knob cracked at base, good overall. (Photo & Photo 2)

101. Stanley 4 Square junior jack plane, decal on side of tote, fine overall. (Photo & Photo 2)

102. Sargent #161 all-iron scrub plane, nice original blade, 65%+ japanning, very good overall. (Photo & Photo 2)

103. Scarce Sargent #160 scrub plane, with 80%+ japanning, fine wooden tote and knob, fine original blade, fine overall. (Photo & Photo 2)

104. Sargent #160 all-iron scrub plane, 85%+ japanning, owner-made blade, fine overall. (Photo & Photo 2)

105. Stanley #81 razor edge spoke with rosewood body, fine overall condition; plus a body for Stanley #85 boxwood razor edge shave, no hang holes in either one. (Photo & Photo 2)

106. RARE Stanley 4 Square pry bar, end may have been ground, the first we've seen. (Photo)

107. Stanley #12 5-oz. Size 4 claw hammer, handle is original, very good overall. (Photo & Photo 2)

108. Pair of Stanley 5-oz. claw hammers; No. 11, 5-oz. Size 4, SW logo, handle replaced; Stanley V-logo original handle, small chip from side of handle, otherwise fine. (Photo & Photo 2)

109. Stanley 4 SQUARE bench mounted vise, has quick release rotation on base, base has one of the mounting ears broken off, base marked PAT. PENDING, first of these we've seen. (Photo & Photo 2)

110. Early Stanley #2 smooth plane with R&L logo blade, first type lateral lever, fine rosewood tote and beaded knob, fine overall. (Photo & Photo 2)

111. Unusual Stanley Defiance #2 smooth plane with ECLIPSE blade, good stained hardwood tote and knob, fine overall. (Photo & Photo 2)

112. RARE Green Gage Butt Mortise plane, from Atlantic, Iowa, no patent known for this one, most of the original green paint remains, fine overall. (Photo & Photo 2)

113. Siegley #12 24-inch jointer plane, Bailey type adjuster, no provision for lateral adjuster, small splinter from left side of tote spur, otherwise complete and very good. (Photo & Photo 2)

114. Union No. X8C "poor man's vertical post" jointer plane, 60%+ japanning, tote broken and glued and missing part of spur, good knob, has former owner initials J.C.A. stamped into left side, good overall. (Photo & Photo 2)

115. Stanley #34 30-inch transitional jointer plane in much better than average condition, with short Q-logo blade, 90%+ japanning on frame, nice tote and knob, very good overall. (Photo & Photo 2)

116. Stanley BAILEY 8C iron jointer plane, good T logo blade, japanning 70 percent, some minor pitting on sides and bottom, will make a good user. (Photo & Photo 2)

117. Stanley #33, 28-inch transitional jointer plane, 65%+ japanning, very good tote and knob, very good overall condition. (Photo & Photo 2)

118. Stanley GAGE G7C iron jointer plane, 95%+ japanning, fine rosewood tote and tall knob, completely original and in fine overall condition. (Photo & Photo 2)

119. Stanley #32, 26-inch transitional jointer plane, 60%+ japanning, tote spur has been shortened, complete and very good overall. (Photo & Photo 2)

120. RARE Upson Nut No. 29 transitional 20-inch fore plane, in fine original conditional, has former owner's name stamped into the blade and into the body. (Photo & Photo 2 & Photo 3)

121. Keen Kutter (Ohio Tool) No. 28 transitional fore plane, nice original tote and knob, fine overall. (Photo & Photo 2)

122. Keen Kutter (Stanley) #K27 transitional 15-inch jack plane, tote spur is MIA, but it is otherwise fine. (Photo & Photo 2)

123. Stanley BAILEY #36 wide body transitional smooth plane, has off-set V-logo blade, 90%+ japanning, fine tote and knob, fine overall. (Photo & Photo 2)

124. Stanley #122 Liberty Bell 8-inch transitional smooth plane, STANLEY blade, 85%+ japanning, some plating lot on cap screw, fine overall. (Photo & Photo 2)

125. Stanley #2 improved try square TYPE I with lead fill around rivets, 6-in. blade, complete and fine. (Photo)

126. Stanley #11 1/2 floor plane, V logo cutter marked on both sides, fine handle, fine overall. (Photo)

127. Stanley #100TD take-down rafter square in original pouch with original key tied to the flap of the canvas pouch, very good overall condition. (Photo & Photo 2)

128. Scarce Disston #240 nail cutting hand saw, nice etching and fine handle, fine overall. (Photo & Photo 2)

129. Eagle Tool Co. take down rafter square with key that comes with a Stanley canvas pouch, fine overall condition. (Photo & Photo 2)

130. Unusual Stanley #232 30-inch aluminum adjustable level, complete and very good. (Photo & Photo 2)

131. Defiance #1205 jack plane new in original box, plane is new box is fair, it has had several corners taped with clear tape and one with duct tape. (Photo & Photo 2)

132. GAMBLES DEPT STORE Set #926 three Stanley DEFIANCE wood chisels 1/2; 3/4, and 1-inch, all have been used but are still good, the box is very rare. (Photo & Photo 2 & Photo 3)

133. Defiance #1243 iron smooth plane in original box, plane is like new, box is torn on the side and a few corners have Scotch tape, good overall. (Photo & Photo 2 & Photo 3)

134. Stanley #1289 KJ No. 2 Mortise Thumb Latch with SW logo, new in original box with instructions, box is very good and instructions have been tattered and taped. (Photo & Photo 2 & Photo 3)

135. Stanley #10 1/2 carriage maker's rabbet plane in original box. The plane has been used, and has 85%+ japanning, good wood, very good overall. The box bottom is fine, the top needs one of the front corners taped. (Photo & Photo 2 & Photo 3)

136. Stanley #65 low angle block plane in original box, plane is near new, former owner has written on the side of the box bottom when and where he bought it, label is about 80%. (Photo)

137. Stanley #93 BUTT GAUGE in original box, gauge is fine with 95%+ nickel, box is very good and includes instructions. (Photo)

138. Stanley #S18 Steel Nickel Trimmed block plane, new in original box, plane is new with SW logo cap, box is very good with minor scuffing, staining and paint splatters. (Photo)

139. Stanley #4 smooth plane new in original box, plane is new, box has been taped with clear tape on corners and across the label. (Photo)

140. Stanley Dowling Jig new in original albeit tattered box. (Photo)

141. Three brass blow torches, all three are polished and are very good. (Photo)

142. NOS BLUE GRASS #522-10 fencing pliers and #433-8 pliers with side cutter, both are new old stock. Both were purchased with the two lots below. (Photo)

143. Five NOS BLUE GRASS cutters: three pair of side cutters and two end cutters, all purchased with the above and below lots. (Photo)

144. Lot of six NOS BLUE GRASS pliers: two needle nose and and four different regular pliers. (Photo)

145. Lot: two pair unusual pliers including STATITE CORP. and Medhous Patent; plus a combination fencing hammer/plier; a tool for cutting hog noses, etc. (Photo)

146. Stanley #4 smooth plane WWII model with hard rubber adjuster nut, complete and very good; plus a #78 duplex plane that is missing the fence and depth stop. (Photo & Photo 2)

147. Two iron block planes: Unknown make 7-inch, complete and very good; and a 6-inch Stanley, complete and very good. (Photo & Photo 2)

148. Stanley #61 low angle block plane with nickel plated lever cap, 1/2 of the adjuster screw head is broken off, can rob an adjuster off another Stanley plane to fix this one, very good overall; plus an unknown make 5-inch with squirrel tail handle, very good. (Photo & Photo 2)

149. Sargent #410 heavy smooth plane, good tall knob, tote broken in middle and missing spur, fine cutter, 90%+ japanning, very good overall. (Photo & Photo 2)

150. Scarce Sargent #722 Auto-Set palne with 98%+ japanning, fine tote and tilting knob, fine overall. (Photo & Photo 2)

151. Unusual Tinsley Patent (U.S. #119,200) weather-board or clapboard siding gauge, made on a patent issued Sept. 19, 1871 to George W. Tinsley, of Blakesburg, Iowa. This was the first gauge by this maker we had seen until recently when two more surfaced. (Photo & Photo 2 & Photo 3)

152. Stanley #18 1/4 knuckle jointed lever cap, 90%+ japanning, BB logo blade, fine ovearall. (Photo & Photo 2)

153. Stanley #S18 BB logo blade, some 80%+ nickel on cap, fine japanning, fine overall. (Photo & Photo 2)

154. Sargent #714 Auto Set jack plane, improper tote and knob, with new wood, this one will be fine. (Photo & Photo 2)

155. Scarce Stanley #215 SW ratcheting screwdriver with rosewood handle, made on patent #1,562,862 issued Nov. 24, 1925 to Christian Bodmer of New Britain, Ct. has had a hang hole filled, but is very good; plus a Stanley SW awl with rosewood handle, complete and very good. (Photo & Photo 2)

156. Stanley #17 block plane with 98%+ nickel plating on lever cap, 80%+ japanning, fine overall. (Photo & Photo 2)

157. Sargent #711 Auto Set junior jack plane, 95%+ japanning, fine wood, fine overall. (Photo & Photo 2)

158. Stanley #18 1/4 knuckle jointed lever cap, BB logo blade, 99%+ plating on cap, 95%+ japanning in bed, fine overall. (Photo & Photo 2)

159. Scarce Sargent #710 Pre Patent Date model with nice beaded knob, tote a replacement, very good overall. (Photo & Photo 2)

160. Stanley #65 low angle block plane, 85%+ japanning, 95%+ plating on cap, nice BB logo blade, fine overall. (Photo & Photo 2)

161. Sargent #708C 8-inch Auto Set smooth plane, scuffed but intact tote and knob, nice iron, very good overall. (Photo & Photo 2)

162. Diamond Edge #101 take-down rafter or framing square, 1912 patent, complete and very good. (Photo)

163. Stanley AR100 aluminum rafter or framing square, complete and fine. (Photo)

164. EAGLE SQUARE M'F'G R100B take-down rafter square, patent 1-22-07, very good overall. (Photo & Photo 2)

165. Keen Kutter K5 1/2C (Stanley Bedrock) jumbo jack plane, complete with Keen Kutter blade, nice rosewood tote and short knob, very good overall. (Photo & Photo 2)

166. Keen Kutter (Stanley) K5 1/2 & K5 Jumbo jack and jack planes, both made on early Bedrock frames, both have original Keen Kutter blades, the 5 1/2 has good wood, the #5 has a spur that's been shortened, both will make fine users. (Photo & Photo 2)

167. Ohio Tool O5 1/4 and 05 1/4C jack planes, one has tote broken and glued, the other has a tote damaged at the base, one has THISTLE BRAND blade and the other has a GLOBE blade, both are very good overall. (Photo & Photo 2)

168. Scarce OHIO TOOL CO. #05 1/2C with scarce Mark's Patent (U.S. #864,101) frog adjuster, this was probably the end of the line for OHIO TOOL and it's only the second one we've seen. The next two feature three more. (Photo & Photo 2 & Photo 3)

169. OHIO TOOL #06 iron fore plane with unusual Mark's Patent (U.S. 864,101) frog adjuster, the bed has been repainted, good rosewood tote and short knob, GLOBE blade, very good overall; plus an OHIO TOOL #05 3/4 heavy jack plane with Thistle Brand blade, fine rosewood tote and knob, fine overall. (Photo & Photo 2)

170. Scarce OHIO TOOL #04 1/2 heavy duty smooth plane, with scarce Mark's Patent (U.S. #864,101) frog adjuster, PAT. 8-20-07, very good tote and knob, very good overall. (Photo & Photo 2 & Photo 3)

171. Scarce OHIO TOOL #04 smooth plane, with frog adjuster, PAT. 8-20-07, tote broken and glued, good knob, GLOBE cutter, very good overall. (Photo & Photo 2)

172. Scarce Ohio Tool #060 low angle Mark's Patent block plane, blade nearly spent, very good overall. (Photo & Photo 2 & Photo 3)

173. Pair of Stanley #23S 24-inch, some minor scuffing, but both are very good overall. (Photo & Photo 2)

174. Scarce HALL & KNAPP 22 1/2-inch mahogany plumb & level, both vials intact, fine overall. (Photo & Photo 2 & Photo 3)

175. Three different Stanley wood levels: 18-inch #102?; 12-inch #107 with SW logo and partial decal, fine overall; and a 9-inch #107 with SW logo, complete and fine. (Photo & Photo 2)

176. Stanley #71 router plane Type I with 75%+ japanning, 1/2-in. blade, fine knobs, fine overall. (Photo & Photo 2)

177. Stanley #71 Type 2 router plane, 60% japanning, good 1/4-inch blade, good beaded knobs, very good overall. (Photo & Photo 2)

178. Stanley #95 Edge Trimming block plane, japanning is 100% but looks like a poor job, box is very good with intact label. (Photo)

179. Stanley #71 router plane in original box, plane is complete and new, box is fair with one corner of the top taped across the label. (Photo)

180. Stanley Handyman H1207 line level new in original box; plus a Stanley #187 line level new in original tin box, box like new. (Photo)

181. Stanley #50 light duty plow plane WWII model new in original tin box with blades, box very good, plane is new and includes instruction sheet and envelope with screw for aligning main stock and sliding section. (Photo)

182. Stanley #35 new in original box, plane is dead mint, box is OK with the top label intact but the picture label on the end of the box gone, several corners of the box top have been reinforced with clear tape. (Photo)

183. Stanley #220 iron block plane new in original box, box is tattered on top but can be conserved. (Photo & Photo 2)

184. Stanley #28 cornering toolsl in original box, there are four 1/4 and 3/8 tools in the box at least are original to the box and are new, plus one 1/8 and 1/16, the box is very good with intact label. (Photo & Photo 2)

185. Scarce Stanley #44 bit and square level new in original albeit tattered box. The level is new and the early style box is heavily taped with clear tape including across the label. (Photo & Photo 2)

186. Stanley #75 bullnose rabbet plane, new in original box, plane is like new and box is very good. (Photo & Photo 2)

187. DEFIANCE by STANLEY #1240 Wedge Vise in original box, the vise is new, the box is fine with intact labels. (Photo & Photo 2)

188. STANLEY #1 plane blade, new old stock, BB logo. (Photo)

189. Box of six 1 3/4-inch new old stock plane blades for #3, 5 1/4; 20; 22; and 113 planes, in original box, box has blown out corners but can be restored, good labels. Also included is one NOS 2-inch blade in waxed envelope. (Photo & Photo 2)

190. Three NOS 1 5/8-inch VICTOR plane blades IOB. (Photo & Photo 2)

191. Stanley #9 1/2 block plane new in original box, plane is like new, box needs a corner or two re-taped. (Photo & Photo 2)

192. Box of three NOS 2 1/4-inch plane blades with chip deflectors in original box, box says 2 1/2 Inch Double Irons FOR PLANES No. 5 1/2 OLD STYLE. Box needs corners taped. (Photo & Photo 2)

193. Sargent #18C Shaw's Patent fore plane, 90%+ japanning, nice tote and knob, former owner's name crudely scratched into both sides, otherwise fine. (Photo & Photo 2)

194. Sargent #30 carriage maker's rabbet plane (like a Stanley #10) with fine japanning, very good tote and knob, fine overall. (Photo & Photo 2)

195. Sargent #14C Shaw's Patent jack plane, 90%+ japanning, nice tote and knob, with good cleaning, this one will be fine. (Photo & Photo 2)

196. Sargent #711 Auto Set junior jack plane, 95%+ japanning, fine wood, fine overall. (Photo & Photo 2)

197. Sargent #9C Shaw's Patent smooth plane, 90%+ japanning, proper blade, nice tote and knob, fine overall. (Photo & Photo 2)

198. Stanley #18 sliding T Bevel new in original box, the bevel is new and the box is fine. (Photo)

199. Sargent #8C Shaw's Patent smooth plane, 90%+ japanning, proper blade, nice tote and knob, fine overall. (Photo & Photo 2)

200. FINE Stanley Bailey #28 Type 17, last transitional model made, 18-inch body, this one is in near-new condition. (Photo & Photo 2)

201. Scarce Stanley #37 JENNY transitional heavy jack plane, less than 50% japanning on frame, first type lateral adjuster, R&L logo blade, complete and in very good overall condition. (Photo & Photo 2)

202. Stanley #36 prelateral transitional smooth plane, faint eagle logo and model number on toe, solid brass adjuster nut, fine tote and knob, fine overall. (Photo & Photo 2)

203. Stanley #25 low angle transitional plane, BAILEY name in front of frame, complete and very good overall. (Photo & Photo 2)

204. Stanley #915 10-inch ratchet brace in original box, brace is new, box is very good. (Photo & Photo 2)

205. Stanley #5 1/4 junior jack plane new in original box, box top has two corners that need to be re-taped, good label. (Photo & Photo 2)

206. Stanley #40 scrub plane new in original box, plane is a later model with rosewood handles, box is very good with intact label. (Photo & Photo 2)

207. Stanley #700 woodworkers vise, new in original box, box is like new too. (Photo)

208. Stanley #4 smooth plane new in original box, plane is the last type with name that reads vertically on the lateral lever, box is scuffed and stained and the corners need to be reinforced, but the label is nice. (Photo)

209. Stanley #42 pistol grip saw set new in original box, saw set is like new with 60% of original decal remaining; box is blown out on one end and moisture stained on top, good label, instruction booklet included. (Photo)

210. Stanley #1 smooth plane, fine Q-logo blade, B casting mark in bed behind frog; fine tote and knob, some clown tried to punch his name or initials into the left side and now it is cracked near the top as a result; japanning is 90%+, this one would be worth sending out and having the casting repaired. (Photo & Photo 2)

211. Three mini planes: a Stanley #101 with squirrel tail handle, R&L logo blade, good overall; #100 mini block plane with BB logo blade, red lever cap, fine overall; and a wooden pattern maker's fillet cutter. (Photo & Photo 2)

212. Stanley #80 scraper, complete and fine; plus a #71 router with 1/2 inch blade, very good overall. (Photo)

213. Two Stanley block planes: #120 missing the front knob, otherwise very good; plus a #102 complete and very good. (Photo & Photo 2)

214. Three mini block planes: Stanley #101; #12-101; and a 4-inch model that was either sold as a toy or as a pencil sharpener. (Photo & Photo 2)

215. Two ESTWING hammers; one with straight claw and the other with curved, both very good overall. (Photo)

216. ESTWING hatchet with leather sheath, complete and fine, traces of original decal on one side. (Photo)

217. Two gouges one by Charles Buck and two S.J. Addis carving tools; a #7 and a #40, all are fine.

218. Four small wrenches; 5-inch screw adjust POPE MFG CO. PREMIER; WESTCOTT KEYSTONE MFG #76 has been sandblasted; unknown multi wrench fits three different sizes; and a small 4-inch Billings & Spencer. (Photo)

219. Three saws sets: Huge Morrill's Patent lever type, fine overall; H&B Mfg. Co. lever type, replaced set screw; and an 1848 A. STILLMAN's Patent, complete and fine. (Photo)

220. Lot of 8 pipe wrenches: one is a Tower & Lyon pipe/nut combination that has a crack in the lower jaw, two 14-inch all-steel models; a 10-inch all-steel; smaller PEXTO and ATLAS TOOL wooden handled models, etc. (Photo & Photo 2)

221. Lot of seven assorted chisels including four by GREENLEE. (Photo)

222. Lot of seven try and try/miter squares, two of the bigger ones have tap for hanging the handle over the edge of a board. (Photo)

223. Unmarked wooden Sheffield-style brace, complete and very good with one STEVENTON center bit. (Photo & Photo 2)

224. Wooden badger plane with PHILLIP LAW blade, blade is bent at the top, very good overall; plus a 16-inch wooden jack plane by SCIOTO WORKS, very good overall. (Photo & Photo 2)

225. Wm. Marples ULTIMATUM plated brace, highly polished with display stand, the chuck is cracked all the way thru on both sides and there are typical cracks in the wood, intact ivory ring in the head, a very good show piece for the office or shop. (Photo)

226. Bernard leather punch, complete and very good; plus seven different sized leather punches, the biggest is 1 3/4 and the smallest is 3/8. (Photo)

227. HANCOCK SHEFFIED plated wooden brace complete with rosewood head, very good overall. (Photo & Photo 2)

228. Two different tools for putting holes in leather belts etc.; plus 12 other leather punches. (Photo)

229. Four long handled scraper planes: Stanley #282 like new; #79 with replacement blade; etc. (Photo)

230. Stanley #45 SW logo on skate, comes with three main sections; two depth stops, two boxes of blades (23 total) will make a good user or use for parts; plus a Stanley #46 skew bladed plow plane early type, one blade included. (Photo & Photo 2)

231. Pearson’s Patented nailer, the original nail gun, complete and very good. (Photo & Photo 2)

232. Pair of brass blow torches; both by TURNER, both highly polished, and ready to display. (Photo)

233. Four nut wrenches: Cochran Patent "SPEEDNUT" wrench self-tightening; H.D. SMITH 6-inch PERFECT HANDLE; WESTCOTT 6-inch No. 76 adjustable S wrench; and an unknown make 10-inch with wood handle, pitted on both sides and having a replacement handle. (Photo)

234. Five hammers: strapped saddler's hammer; another patented DEC. 10, 1907; a PAT APPL'D FOR combination hammer; etc. (Photo)

235. Four nut wrenches: 12-inch adjustable S wrench; Bemis & Call 8-inch FINE; unknown center adjusting side-jaw; and ANYANGLE WRENCH patented Nov. 1916 Lima, Ohio, very good. (Photo)

236. Three screwdrivers including a TUFFY by the SWALLOW AIRPLANE CO. Wichita, Kan. (Photo)

237. Five plier type tools: DIAMALLOY R510 fencing pliers; "KANT SLIP" pliers from A.D. WRENCH & TOOL CO. BARABOO, WIS; side cutters; and two pair needle nose pliers. (Photo)

238. HEIMBACH patent wrench by the LEVER WRENCH CO. DULUTH, MINN.; plus a FORDSON 10-inch NO. 80 adjustable S wrench. Both wrenches are in very good overall condition. (Photo)

239. Six pliers type tools: Two different sized Cronk type fencing pliers; two nippers; unknown nipper-type tool; and a #305 EAGLE CLAW WRENCH from Rockford ILL. (Photo)

240. Stanley #116 metal frame mitre (miter) box, fine overall condition, box has a small tear on top but is very good overall with original label. (Photo & Photo 2)

241. Stanley #82 scraper in original box, scraper is fine, box is very good with original label. (Photo & Photo 2 & Photo 3)

242. Stanley #55 6-in. HURWOOD Screwdriver box, one 6-in. HURWOOD screwdriver in very good condition is included as are two 3-in. examples, the box is fine with intact label. (Photo & Photo 2 & Photo 3)

243. Zenith MARSHALL-WELLS Hardware Duluth Minn. Pair of Zenith files in original box, files are new, box is good with a stained top. (Photo & Photo 2)

244. Stanley #66 hand beader new in original box, all blades present T logo on router blade, both flat and round bottoms, a new plane is a tatty box that has one torn flap on top. (Photo & Photo 2)

245. Stanley #340 Electric Soldering Iron new in original box, iron is new, box bottom is torn at one end, otherwise good with intact label. (Photo & Photo 2)

246. Stanley #80M Malleable Scraper, new scraper, good box top, bottom blown out and needing tape on one edge, intact label. (Photo & Photo 2)

247. Stanley #138 Universal Level Sights new in original box, new sights, good box with 95%+ label. (Photo & Photo 2)

248. Four Stanley block planes: DEFIANCE 7-inch with black japanning, complete and fine: VICTOR by Stanley #1120 with gray bed and red on cap, complete and fine; DEFIANCE by Stanley 5 1/2-inch #1240 with partial decal on cap, fine overall; and a Stanley Handyman #1248 with partial decal on cap, fine overall. (Photo)

249. Stanley #2 smooth plane, little used V-logo blade, complete and fine. (Photo & Photo 2)

250. RARE Sargent #710C prototype 1-2-3 as described in Dave Heckel's book Sargent Planes Identification and Value Guide 2nd. Ed. Page 49, this one has a later replacement tote, but is otherwise complete and very good. (Photo & Photo 2)

251. Stanley #S18 malleable steel (unbreakable) block plane, BB logo blade, complete and very good. (Photo & Photo 2)

252. Scarce SARGENT #10 Shaw's Patent heavy smooth plane, tote broken and glued otherwise complete and fine. (Photo & Photo 2)

253. Stanley #10 1/2 carriage maker's rabbet plane TYPE I with adjustable throat, plane has an early repair to the left side and the knob is broken at the base, good for parts or as a user. (Photo & Photo 2)

254. Two Stanley claw hammers: #9 1/2 16-ounce with a nail-holder on the back, fine overall; plus a rare 4 SQUARE 14-oz. claw hammer, SW logo, replacement handle, very good overall. (Photo & Photo 2)

255. Stanley #144 1/2-inch corner rounding plane, japanning 95%+, fine overall. (Photo & Photo 2)

256. Stanley #N51 1/2 16-oz claw hammer, with most of the original decal on the handle, fine overall. (Photo & Photo 2)

257. Stanley #144 3/8-inch corner rounding plane, SW logo blade, 95%+ japanning, complete and fine. (Photo & Photo 2)

258. DEFIANCE by STANLEY #211 1/2 16-oz. claw hammer with 80%+ original decal on the handle, fine overall. (Photo & Photo 2)

259. Early Stanley #6 Type 5 fore plane, first style lateral lever, 90%+ japanning, fine early style tote and beaded knob, very good overall. (Photo & Photo 2)

260. Union Tool Co. No. 139, 7-inch iron block plane, knuckle joint lever cap, adjustable throat, 95%+ japanning, complete and fine. (Photo & Photo 2)

261. Scarce METALLIC PLANE CO. 6-inch iron block plane, has makers mark on sole, improper OAK LEAF blade, the lever cap is intact and they are almost impossible to find unbroken, good for parts or restoration. (Photo & Photo 2)

262. Stanley #60 double bladed spokeshave with flat and convex bottoms, this is the final model with one BB blade and one SW, 98%+ japanning, fine overall. (Photo)

263. BAILEY TOOL CO. #8? Iron spokeshave with the battle-axe logo on the blade and the chip breaker, not even a trace of the original japanning remains, very good overall. (Photo)

264. Stanley #55 hollow faced spokeshave, 75% japanning, good unmarked blade, S casting mark under handle, very good overall. (Photo)

265. Scarce Stanley #2 prelateral smooth plane with fine R&L logo blade, fine early style tote and knob, 95%+ japanning, the only detraction is the social security number scratched into the left side, otherwise FINE.

266. Sargent #3412 wide body transitional smooth plane, fine overall condition. (Photo & Photo 2)

267. Stanley #36 wide body transitional smooth plane, Q-logo blade, 85%+ japanning, good tote and knob, very good overall. (Photo & Photo 2)

268. OHIO TOOL CO. #035 transitional smooth plane, 95%+ japanning, fine GLOBE iron, GLOBE logo in left side of plane, as good a transitional as you can find. (Photo & Photo 2)

269. LAKESIDE (Stanley) Liberty Bell 8-inch transitional smooth plane, 95%+ japanning, fine LAKESIDE blade, good knob, fine overall. (Photo & Photo 2)

270. Union Tool Co. #21 7-inch transitional smooth plane, 85%+ japanning, nice original blade, fine overall. (Photo & Photo 2)

271. Stanley #67 Universal spoke shave with both flat and round bottoms, and fence or guide, complete and fine. (Photo)

272. Scarce Sargent #22 Shaw's Patent iron jointer plane, 80%+ japanning, a few paint splatters on otherwise fine original tote, fine knob, Sargent logo in oval on blade, fine overall.

273. Three small brass torches; the one in the center is by LENK MFG. (Photo)

274. RARE Stanley nickel plated try square with 2-inch blade, very good overall. (Photo)

275. Sargent #3428 transitional 28-inch jointer plane with early horseshoe lateral lever, the frame and lever cap have been tastefully repainted, very good overall. (Photo & Photo 2)

276. Gage #G30 transitional jointer plane, top of toe is broken, otherwise complete and very good. (Photo & Photo 2)

277. Stanley #33 prelateral transitional jointer plane, has nice eagle logo on the toe, tote spur has been reshaped, complete and very good overall. (Photo & Photo 2)

278. Folding Saw Company portable drag saw, this one has most of the original stenciling on the wooden body and on the top of the rear leg; shows little evidence of prior use, looks like one small rod that connects to the front of the saw blade is the only piece missing, fine overall condition. This one has been hanging in the rafters of my garage and the rag tied around the middle of it is there just to keep the blade from moving while hanging it. (Photo & Photo 2 & Photo 3)

279. Pair of Disston hand saws: on top a D8 with 7 ppi blade, nice etch, intact handle, very good overall; and another D8 crosscut with 7 ppi blade good etch and nice handle. (Photo)

280. Pair of Disston hand saws: on top a 9 1/2 ppi D8 with thumb hole handle, crack in top spur of handle, good overall; and a D100 with 11 ppi blade, chip from underside of top handle spur, good overall. (Photo)

281. SIMONDS NO. 10, 28-inch rip saw, nice etch, handle spurs shortened a bit, very good overall. (Photo)

282. DISSTON D-8 20-inch panel saw with 10 ppi blade, fine handle, fine overall. (Photo)

283. DISSTON National Hardware Special 1840 to 1954, 26-inch blade, nice etch, good handle, fine overall. (Photo & Photo 2)

284. DISSTON D-23 26-inch LIGHTWEIGHT 5 1/2 ppi, in near new condition. (Photo & Photo 2)

285. DISSTON NINTEEN-FORTY SPECIAL 1840-1940 centennial commemorative saw, 26-inch 8 ppi blade, nice etch, very good overall. (Photo & Photo 2)

286. DISSTON 22-inch ACME #120 no-set hand saw, nice etch, original finish on handle has been stripped off, very good overall. (Photo & Photo 2)

287. DISSTON K-4 KEYSTONE AIR MASTER with fine etch of a flying fortress airplane, 26-inch 5 1/2 ppi blade, fine handle, fine overall. (Photo & Photo 2)

288. DISSTON D-8 22-inch panel saw, good etch, very good overall. (Photo & Photo 2)

289. DISSTON D-15 VICTORY hand saw, 26-inch, 8 ppi blade, nice etch, very good handle, fine overall. (Photo & Photo 2)

290. DISSTON D-23 rip saw with 26-inch 5 1/2 ppi blade, nice etch, fine overall. (Photo & Photo 2)

291. SIMONDS No. 372 MADE EXPRESSLY FOR NAGELL HARDWARE MINNEAPOLIS MINN hand saw with 9 ppi blade, nice etch, very good overall. (Photo & Photo 2)

292. DISSTON D-8 hand saw with 26-inch 9 ppi blade, fine overall condition. (Photo & Photo 2)

293. Pair of DISSTON hand saws: D-8 26-inch 8-ppi blade, good etch very good overall; and a D100 22-inch, 10-ppi blade, decent etch, scuffed but intact handle, very good overall. (Photo)

294. Pair of DISSTON hand saws: D8 with 26-inch, 10? ppi blade, small patches of mild pitting where the point size is usually marked, good handle, good overall; plus a D8 with 20-inch 10-ppi blade, missing one of the screws from the handle, very good overall. (Photo)

295. OPEN.

296. OPEN.

297. C.L. Berger & Sons surveyors transit IOB, has a full vertical circle. It has their top-of-the-line cast bronze one-piece standard. This one was probably made in the late 1930s to early 1940s. Looks to be in very nice condition. Comes with a very good set of legs. (Photo & Photo 2)

298. Extra tall set of legs for a surveyor's level or transit. This pair is 60-inches overall and the aluminum cap on top says DIETZGEN, 8 THREADS, 3 1/2 INCH, MADE IN U.S.A., very good.

299. Keuffel & Esser engineres/surveyors transit IOB. Here is a Keuffel & Esser engineer's/surveyors transit made around 1900. It has the somewhat rare twisted standards and looks to be in good condition for its age. Comes with a nice set of legs. (Photo & Photo 2 & Photo 3)

300. Traditional cabinet maker's tool chest, pine dovetailed construction, single panel top, two dovetailed constructed tills, compartment below for moulding planes. Owners name and date painted in 2-inch letters inside top "A. P. GILBERT APRIL 1860". Original lock and key, heavy cast iron handles on the ends. Some of the original paint remains. Chest bottom has been replaced. (Photo & Photo 2)

301. Sargent #29 carriage maker's rabbet plane, small chip from top of tote spur, otherwise complete and fine. (Photo & Photo 2)

302. FINE Stanley #3 smooth plane, late model BB cutter, complete and fine. (Photo & Photo 2)

303. Sargent #7 Shaw's Patent 7-inch smooth plane, tote broken and glued, knob chipped at base, otherwise complete and very good. (Photo & Photo 2)

304. Stanley #144 1/2-inch corner rounding plane, japanning 95%+, fine overall. (Photo & Photo 2)

305. Stanley BEDROCK #606C FT 70%+ japanning, BEDROCK lever cap has chipped corner, otherwise complete and very good. (Photo & Photo 2)

306. Ohio Tool Co. #06C fore plane tote broken at base and glued, good knob, STANLEY BB blade, repainted bed, good user. (Photo & Photo 2)

307. Keen Kutter K5 1/2C (Stanley Bedrock) heavy jack plane, tote broken and glued, good knob, proper blade, very good overall. (Photo & Photo 2)

308. Chaplin's Patent 7 1/2-inch block plane with adjustable throat, 1 7/8-inch blade, patent dates stamped into left side, very good overall. (Photo & Photo 2)

309. Early Sargent #307 7-inch iron block plane, nice original blade, 80%+ japanning, very good overall. (Photo & Photo 2)

310. Sargent #59 scraper plane (like Stanley #112) with proper SARGENT blade, 90%+ japanning, scuffed but intact tote, nice beaded knob, fine overall. (Photo)

311. Stanley BEDROCK #603 FT smooth plane, tall knob chipped at base, tote is likely a later replacement, former owners name scratched into left side, will make a fine user. (Photo)

312. Ohio Tool Co. #03C smooth plane, nice tote and low knob, good GLOBE logo blade, 90%+ japanning, very good overall. (Photo)

313. Stanley TWO TONE #OH4 smooth plane, unusual yellow bed with red chipper and frog, nice tote and knob, fine original blade, fine overall. (Photo)

314. Stanley TWO TONE #0H20 block plane with gray bed and red cap, fine original cutter, fine overall. (Photo)

315. Early Stanley #120 iron block plane with 6-pointed star on lever cap, early blade, 55% japanning, good knob, good or better overall condition. (Photo & Photo 2)

316. Early Stanley #110 iron block plane with 6-pointed star on lever cap, R&L logo blade, 65% japanning, good knob, very good overall condition. (Photo & Photo 2)

317. Stanley #140 skew-bladed rabbeting block TYPE I with patent date in removable side, nice knob, fine overall condition. (Photo & Photo 2)

318. Chaplin's Patent 6 1/2-inch block plane with nice Tower & Lyon block plane, nice knob, very good overall. (Photo & Photo 2)

319. Three Stanley bench planes: #7 jointer with fine SW logo blade, tote broken and needs glue, good front knob, very good overall: #5 1/2C jumbo jack plane, tote broken & glued, good knob, T logo blade, very good overall; and a DEFIANCE #4C smoother with cut-off SW blade, small chip in corner of throat, a good user.

320. Scarce Stanley #1951 fibre board beveler plane, 98%+ japanning, nice wooden knob, fine overall. (Photo & Photo 2)

321. Stanley #239 1/8-inch special dado plane, complete with SW logo blade, intact depth stop and fence, fine overall. (Photo & Photo 2)

322. Stanley #378 weather-strip rabbet plane, 98%+ japanning, two depth stops, BB logo blade, fine overall. (Photo & Photo 2)

323. Scarce L. BAILEY DEFIANCE #10 compass or circle plane, battle-axe logo, light pitting on top of blade and on flexible sole, nice adjuster with patent date, good overall. (Photo & Photo 2)

324. Stanley #984 ratchet corner brace new in original box, the box has clear tape at front corner and is scuffed on top, otherwise very good. The brace is new. (Photo & Photo 2)

325. Stanley #60 1/2 low angle block plane in original box, plane is new and box is fine with original price in grease pencil on side. (Photo & Photo 2)

326. Stanley #9 1/4 block plane new in original box, box bottom needs one corner retaped and top is scuffed and stained but has a good label. (Photo & Photo 2)

327. Millers Falls #33 mini block plane in original box, plane is new, box need one corner of the bottom re-taped but is otherwise fine. (Photo & Photo 2)

328. Stanley #90 marking gauge new in original box, gauge is new, box needs one corner of the top re-taped. (Photo & Photo 2)

329. Scarce Stanley #1951 fibre board beveling plane, new in original box with instruction sheet, plane is new, box top is missing flap that would have had the label. (Photo & Photo 2)

330. FINE razee-style rosewood jack plane, fine BUCK BROS. 1 3/4-inch double iron, as good as they come. (Photo)

331. Small 3-inch coach maker's handled rabbet with 2 1/2-inch tail handle, with 1-inch wide iron, complete and fine. (Photo & Photo 2 & Photo 3)

332. FINE 8 1/2-inch ebony smooth plane with fine BUCK BROTHERS 1 3/4-inch double iron. TOP SHELF! (Photo)

333. Unusual 3-inch beech badger plane, the name on the toe is J. ADAMS, appears to have been professionally made, very nice. (Photo & Photo 2 & Photo 3)

334. Stratton Brothers 28-inch fully-bound plumb & level with laminated mahogany stock, complete and very good overall. (Photo & Photo 2 & Photo 3)

335. Small 4 1/2-inch coach maker's compassed rabbet plane, very good overall. (Photo & Photo 2 & Photo 3)

336. LAMBERT, MULLIKEN & STACKPOLE, BOSTON MASS, 1852-55, high quality 28-inch Cuban mahogany and brass plumb & level, brass top plate has eagle stamp and 12 screws, complete and very good overall. (Photo & Photo 2)

337. Fine mini wooden router, 6 inches wide overall, has an old museum or collection number on the back, fine overall. (Photo & Photo 2 & Photo 3)

338. Stanley Rule & Level Co. #96 28-inch plumb & level, fully brass bound, triple laminated rosewood stock, made 1897 to 1911, complete and very good overall. (Photo & Photo 2)

339. W. & L.E. GURLEY No. 12, surveyors chain, sixty-six feet, or four poles long, composed of one hundred links and with brass tally marks at the end of every ten links, brass handles, fine overall condition. (Photo)

340. LUFKIN 200-link (132 feet) surveyor's tape measure, in wooden frame, complete and in fine overall condition. (Photo & Photo 2 & Photo 3)

341. Nice 37 1/2 X 8 1/4 X 2 3/4-inch oak box with compartments, not sure of particular use and almost looks like a tray out of an old cabinetmaker's tool chest. (Photo)

342. Nice 28 x 15 x 7 inch Mahogany carpenter's day box or tool box that has both a hinged lid, and front panel that is hinged and drops forward to reveal the contents in the lower part of the box, brass hardware and intact lock, no key, very good overall condition. (Photo)

343. Small brass rabbet plane with applied steel sole, 3/4-inch blade, fine ebony wedge, fine overall. (Photo & Photo 2)

344. Fine 4-inch brass chariot plane with mahogany wedge and infill, fine 1 1/2-inch blade, applied steel sole, fine overall. (Photo & Photo 2)

345. Traditional woodworking work bench with 2-inch wood screw face and end vises, tray, drawer, hold-down holes, will make a fine user. Size -74 x 22 x 32. (Photo & Photo 2)

346. Scarce Marbles fish grabber, 90%+ nickel plating, complete and fine. (Photo & Photo 2)

347. Wiley & Russell wheelwright's traveler, one cracked spoke and light rust, will good to good overall condition; plus a Simmons Hardware straight razor with end of blade chipped, otherwise OK. (Photo)

348. Rare Stanley #2 three-angle tool used by attaching to a rule, has built-in level, complete and very good. (Photo)

349. Stanley #125 multi tool that can be used as a square, bevel, and level, intact scribe, fine overall; plus a Stanley #36 double plumb and level with shaft groove, all three vials intact, vials have covers, very good overall. (Photo & Photo 2)

350. RARE Davis Level & Tool Co. 9-inch smooth plane, less that 20% original japanning, fine original tote, W.BUTCHER blade, the original knob (tied to the front knob) has had a flat sawed into it, but is otherwise complete and very good. (Photo & Photo 2 & Photo 3)

351. Scarce OHIO TOOL #016 Mark's Patent block plane, proper blade has been hit with a hammer on the top a few times, plane bed has the scarce red japanning, a fine plane overall. (Photo & Photo 2)

352. Vaughan & Bushnell #905 nicknamed "The Poor Mans Bedrock" due to the flat sides, this one has a Stanley SW logo blade, battleship gray painted bed, tote scuffed but intact, knob has a crack, good overall. (Photo & Photo 2 & Photo 3)

353. Ohio Tool Co. #065 Mark's Patent low angle block plane, 95%+ japanning, a scarce patent plane in fine overall condition. (Photo & Photo 2)

354. Scarce Union No. 548 Trask Patent 28-inch transitional jointer plane, some scuffing to body, but complete and very good overall. (Photo & Photo 2)

355. Stanley #65 chamfer spokeshave with 90%+ japanning, fine V-logo blade, fine overall. (Photo)

356. RARE CHAPLIN'S PATENT MAY-7-1872 MADE BY TOWER & LYON, a new spur has been added to the original tote, fine knob, original blade, very good overall. (Photo & Photo 2)

357. Stanley #14 adjustable try square with 6-inch blade, 98%+ nickel plating, marked STANLEY, fine. (Photo)

358. Pair of Trask Patent transitional planes: No. 515 smoother with 90%+ japanning, proper blade, fine overall; and a No. 537 jack, that is missing the blade, frame & cap have been repainted, with a new blade will make a good user or display piece. (Photo & Photo 2)

359. Stanley #14 adjustable try square with 6-inch blade, 98%+ nickel plating, marked with T logo, fine. (Photo)

360. Unusual Stanley #198 razor blade holder, for stropping the razor blades used fiber board beveling planes, 90%+ japanning, fine overall. (Photo)

361. Scarce Stanley #14 adjustable try square with 4-inch blade, 98%+ nickel plating, marked STANLEY, fine. (Photo)

362. Pair of Stanley #3 trammel points in like new condition. (Photo)

363. Stanley #79 Type I side rabbet plane, japanned body indicates it was made during WWII, complete and fine. (Photo)

364. Stanley #271 mini router plane, 95%+ plating, good blade, fine overall. (Photo)

365. Stanley #95 Type I nickel plated butt gage, 90%+ plating, fine overall. (Photo)

366. Lot of four wrenches including a rare QUEEN CITY 4-inch Crescent type, two Crescent Tool Co. CRESTALOY 4-inch models and a small ACME twist handle. (Photo & Photo 2)

367. HandE Sept. 20, 1921 helical adjusting nut wrench, very good overall. (Photo & Photo 2)

368. Lufkin #2062 24-inch, 3-fold rule with level, very good overall; plus a Stanley #36 1/2L caliper rule that is complete and very good. (Photo & Photo 2)

369. Pair of Stanley 4 Square zig zag rules: #1156 72-inch complete and fine; plus a 48-inch with SW logo, complete and fine. (Photo & Photo 2)

370. Chapin Stephens #036 combined rule/level/bevel and square, this one has some minor staining of the boxwood and a few small chips near the level opening, otherwise complete and very good overall. (Photo & Photo 2)

371. Stanley #72 SW 24-inch 4-fold rule that is graduated on the edges, very good overall. (Photo & Photo 2)

372. Stanley #72 razor edge spoke shave with 70%+ japanning, intact cutter, fine ovrall. (Photo & Photo 2)

373. Stanley #96 Type I blind nailer plane, just add your own 1/4-in. chisel, and you can start using it right away, very good overall. (Photo)

374. Stanley #193 fibre board beveling plane, looks to be complete except for the blades, very good overall condition. (Photo & Photo 2)

375. RARE Keen Kutter K2C 7-inch corrugated smooth plane, these were made by Stanley on early Bedrock-style frames, fine tote and knob, original blade, very good overall. (Photo & Photo 2 & Photo 3 & Photo 4)

376. Stanley #131 adjustable double-ended block plane, SW logo blade, 85%+ japanning, fine overall condition. (Photo & Photo 2)

377. Scarce Green Gage Butt Mortise Plane from Atlantic, Iowa, PAT APLD FOR cast into side, complete and very good. (Photo & Photo 2 & Photo 3)

378. Stanley #9 1/2 Type I block plane for parts, has fine lever cap, and throat closing plate, the rest is junk. (Photo & Photo 2 & Photo 3)

379. Stanley #20 12-inch try square with nice rosewood handle, very good overall; plus a Stanley #25 12-inch sliding bevel, complete and very good. (Photo)

380. Three Stanley layout tools: 4 Square universal square with SW logo on 7-in. blade, complete and fine: and a Stanley #21 universal square with 7-inch blade, complete and very good; plus a #30 angle divider that has an improper screw, but is otherwise very good. (Photo)

381. Two ratchet braces: YANKEE #2101A 10-inch, complete and fine; plus a Stanley #811 12-inch complete and fine. (Photo)

382. Three sliding bevels: Stanley #25 complete and very good overall: Unmarked model, complete and very good; plus a Henry Disston & Sons that is complete and fine. (Photo)

383. Pair of spokeshaves: Bailey Tool Co. with faint battleaxe logo on blade, just traces of original japanning, very good overall; plus a Stanley #X63 with 99%+ japanning, fine SW logo blade, fine overall. (Photo)

384. Marbles Gladston, Mich. Hunting knife with leather sheath, complete and fine; plus a Marples match safe with matches included, very good. (Photo & Photo 2)

385. Three Stanley marking gages: #165 in fine original condition; #73 mortise gauge, compete and fine; plus a #92 butt and rabbet gauge, complete and fine. (Photo)

386. Pair of iron spoke shaves: BAILEY TOOL CO. with battleaxe logo, minor pitting on blade and little japanning left on body, good one to restore; plus a B PLANE with open loop handles, one handle has been welded and the entire thing painted black. (Photo & Photo 2)

387. Pair of toy sized iron block planes, one is an early Stanley #101 with football shaped logo on blade, very good overall; plus a similar one that is unmarked, just a trace of japanning, good overall. (Photo)

388. Pair 8-inch smooth planes: Stanley #3, SW logo blade, tote broken and glued, good tall knob, a good user; and a Vaughan & Bushnell VANADIUM #903C with good tote and knob, fine original blade, fine overall. (Photo & Photo 2 & Photo 3)

389. Stanley #9 3/4 tail handled block plane, L BAILEY blade, Excelsior style body, very good overall. (Photo & Photo 2)

390. Stanley #19 Type I R&L logo blade, little plating on lever cap, 50%+ japanning, good overall. (Photo & Photo 2)

391. Stanley #9 1/2 Type 6 block plane, Excelsior style body, L. Bailey's Patent cutter, left front corner chipped, otherwise very good overall. (Photo & Photo 2)

392. Stanley #A18 aluminum block plane, SW logo on knuckle cap, BB logo blade, very good overall. (Photo & Photo 2)

393. Stanley #60 low angle block plane, 65%+ nickel on cap, 80%+ japanning, R&L logo blade, very good overall. (Photo & Photo 2)

394. Stanley #103 Type I block plane with rosewood front knob, 75%+ japanning, very good overall. (Photo & Photo 2)

395. Sargent #714C Auto Set jack plane, japanning 90%+, tote broken and glued and seriously scuffed, ill-fitting knob, put new wood on this one and it will be fine. (Photo & Photo 2)

396. Stanley #39 5/8-inch dado plane, V logo on cap screw head, intact depth stop and nickers, very good overall. (Photo & Photo 2)

397. RARE SARGENT #24 Shaw's Patent 24-inch iron jointer plane, 70% japanning, nice original blade, fine tote and beaded knob, very good overall. (Photo & Photo 2)

398. Unusual 21 1/4-inch Birmingham B PLANE with PAT OCT 22, 1889 on iron, fine tote and beaded knob, fine overall. (Photo & Photo 2)

399. Stanley BEDROCK #602 FT smooth plane, japanning tastefully enhanced, good SW logo blade, fine overall. (Photo & Photo 2 & Photo 3)

400. UNION #X8 24-inch iron jointer plane, vertical post adjuster, fine tote and knob, very good original blade, 90%+ japanning, fine overall. (Photo & Photo 2)

401. Scarce Stanley #5 1/4C corrugated junior jack plane, 90%+ japanning, good Type I SW logo blade, fine rosewood tote with intact decal, good tall knob, very good overall. (Photo & Photo 2 & Photo 3)

402. Stanley #74 floor plane, missing the long wooden handle, good Q-logo blade, 70%+ japanning, very good overall. (Photo & Photo 2)

403. RARE Stanley #2 8-inch smooth plane, 98%+ japanning, fine tote and knob with thick varnish, a rare plane to find in the 8-inch size, and this one is fine. (Photo & Photo 2 & Photo 3)

404. Sargent #410 heavy smooth plane, good beaded knob, tote glued in middle, fine original blade, very good overall. (Photo & Photo 2)

405. Scarce Sargent #74 compass or circle plane, with 70%+ japanning, complete and very good overall. (Photo & Photo 2)

406. FINE Stanley #112 scraper plane with 22 toothing blade, the tote and knob are near perfect and the japanning is 99%+, as good as they get. (Photo & Photo 2)

407. Stanley #65 chamfer spokeshave, fine T-logo blade, 95%+ japanning, fine overall. (Photo & Photo 2)

408. Stanley #68 rabbeting spokeshave, SW logo blade, complete and in fine overall condition. (Photo & Photo 2)

409. Stanley #62 double bladed spokeshave with Stanley Rule & Level-logo blades, 75%+ japanning, very good overall. (Photo & Photo 2)

410. H.C. MARSH & CO. ROCKFORD, ILL #2 smooth plane with 1 5/8-inch blade, fine rosewood tote and knob, fine overall. (Photo & Photo 2 & Photo 3)

411. Early Stanley #12 scraper, has AUG 31, 58 patent date on brass adjuster nut, fine rosewood handle, 55%+ japanning, NO BLADE, very good overall. (Photo & Photo 2)

412. Stanley #81 cabinet scraper with 95%+ plating, fine rosewood bottom, SW blade, fine overall. (Photo)

413. Early Stanley #48 with vine cast handle, 90%+ japanning, fine overall. (Photo & Photo 2)

414. Early Stanley or Boston Bailey scraper, there is no blade and the outer blade adjuster nut is MIA. (Photo & Photo 2)

415. KRETSCHMER TREADWAY Lincoln Axe, Dubuque, Iowa, the top has been peened over and ground off, but it is otherwise very good overall. (Photo & Photo 2)

416. Pair of Stanley marking gages: #65 & #165 both complete and in fine overall condition. (Photo)

417. Nice circular glass cutter with rosewood knobs and base, fine overall; plus fine Millers Falls coping saw with rosewood or cocobolo handle and May 28, 1876 patent date, fine overall. (Photo)

418. Pair of Stanley marking gages: unmarked Stanley #76 and another unmarked with brass wear piece, and nice point, both in fine overall condition. (Photo)

419. Pair of Stanley HURWOOD screwdrivers that have both been modified by and are marked ORD DEPT U.S.A. and are said to have been used to work on artillery shells. (Photo)

420. Three different tool handles one with Stanley SW logo on the chuck shell, all three have tools inside, one even has a wrench to work the chuck, all in very good overall condition. (Photo)

421. Two Stanley #93 butt and rabbet gauges, one with script lettering and one with SW logo, both complete and fine. (Photo)

422. Stanley #79 Type I side rabbet plane, WWII model with 90%+ japanning, former owner has initials EAL scratched into skate, a very good user. (Photo)

423. Stanley #58, 8-inch pair of dividers, complete and very good; plus a Stanley #39, 6-inch machinist level, complete and very good. (Photo)

424. Marbles hunting knife in leather sheath, both are worn, but still in good overall condition. (Photo & Photo 2)

425. Marble Arms and Mfg. Co. compass with built-in safety pin for pinning to an article of clothing or pack, fine overall. (Photo & Photo 2)

426. Marble match safe for keeping matches dry when camping, fishing or hiking. (Photo & Photo 2)

427. Chisels: 1/8-inch OVB mortising, fine; 3/8-in. NORTHERN KING by Marshall Wells Duluth; Blue Grass 1/2-inch heavy duty mortising with nice handle, fine; and Stanley 2-inch EVERLAST, needs some TLC. (Photo)

428. Stanley #215 SW logo ratcheting screwdriver, complete with original decal, fine rosewood handle, fine overall. (Photo)

429. Stanley #300 or #301 rosewood tool handle, complete and very good. (Photo)

430. Pair of Stanley framing squares: Handyman #500C copper clad, complete and fine; plus a #100B HARDENED CORNERS with SW logo, very good overall. (Photo & Photo 2)

431. Stanley #39, 6-inch machinist level, 90%+ plating, fine overall. (Photo)

432. Stanley #34, 6-inch level with vial cover, shaft goove, SW logo on cover, fine overall. (Photo)

433. Pair of late model Stanley #98/99 side rabbet planes both with depth stops, 85%+ nickel, fine overall. (Photo)

434. Stanley #34, 8-inch level with vial cover, shaft goove, SW patent date on cover, fine overall. (Photo)

435. Stanley #200 plane blade and chisel guide, 90%+ original japanning, fine overall. (Photo)

436. Lot of Stanley plane parts: BEDROCK lever cap for #603 or #605 1/4; front skate or nose piece for a #141 Miller's Patent plow plane; and a depth stop for #378 weather-strip rabbet plane. (Photo)

437. Stanley #66 hand beader with 98%+ plating, both flat and round bottoms, one beading blade, fine overall. (Photo)

438. Stanley #200 nickel plated plane blade and chisel sharpening guide, 95%+ plating, fine overall. (Photo)

439. Luflin #2051 combination folding rule and level, complete and fine. (the trammels shown on it are in the next lot). (Photo & Photo 2)

440. Scarce Stanley #99 rule trammel set, complete and in fine overall condition. (The rule they are depicted on is listed in the previous lot.) (Photo & Photo 2)

441. C-S. Co. (Chapin Stephens) #65 12-inch, 4-fold rule in fine overall condition. (Photo & Photo 2 & Photo 3)

442. RARE Stanley #133 SW logo, 36-inch 4-fold rule made for one year only (1930), this one is missing the little indexing pins, but it is otherwise in fine overall condition. (Photo & Photo 2 & Photo 3)

443. A. TREADWAY & SONS HARDWARE LINCOLN AXE Dubuque, Iowa single bit axe, has a new handle, very good overall. (Photo & Photo 2)

444. RARE Stanley HANDYMAN #H895 Wall Mounting Tool cabinet in NEW OLD STOCK condition will a full set of tools and all associated paperwork, all you need is the cardboard box. (Photo & Photo 2 & Photo 3)

445. E. GARNICH & SONS HWE CO. ASHLAND WISCONSIN double bit axe SUPERIOR QUALITY FINEST FINISH, very good overall. (Photo & Photo 2)

446. Stanley HANDYMAN TOOL CHEST No. 891 DEFIANCE BY STANLEY with most if not all original tools, three sets of pliers, original saw, nice plane, etc., original packing slip depicting all the tools, fine overall. (Photo & Photo 2 & Photo 3)

447. PLUMB CHAMPION single bit axe, handle has two screws holding a cracked area near the head, the head is fine. (Photo & Photo 2)

448. Stanley-type oak tool box with handle, very good overall condition. (Photo & Photo 2)

449. RARE Set of 18 double sided Stanley Instructional Charts with a wooden frame, frame, fine overall. First we've seen or sold. (Photo & Photo 2 & Photo 3)

450. Scarce STANLEY #2C smooth plane, 95%+ japanning, good SW logo blade, fine rosewood tote and knob, tote retains much of the original decal, fine overall. (Photo & Photo 2 & Photo 3)

451. OHIO TOOL CO. #010C corrugated carriage maker's rabbet plane, has HICKORY KELLY HOWE THOMPSON DULUTH blade in it, but looks like blade was cut down from something bigger, very good overall. (Photo & Photo 2)

452. Birmingham Plane Co. 14-inch iron jack plane with faucet adjuster, nice original blade, chip from rear corner of throat otherwise complete and very good overall. (Photo & Photo 2)

453. Stanley #10 TYPE 2 prelateral carriage maker's rabbet plane, solid brass adjuster nut, early style rosewood tote, beaded knob, R&L logo blade, very good overall. (Photo & Photo 2)

454. Stanley #33 all-steel hacksaw, complete and very good. (Photo & Photo 2)

455. Winchester #2902 meat saw, complete and fine. (Photo & Photo 2)

456. Scarce STANLEY VICTOR No. 780 16-inch tool box saw, nice etching, complete and fine. (Photo & Photo 2)

457. Stanley #278 rabbet and filletster plane, missing the depth stop, fine cutter and both spurs intact, very good overall. (Photo & Photo 2)

458. Stanley #36 wide body transitional smooth plane, 95%+ japanning, most of the original varnish remains, as good as transitional planes get. (Photo & Photo 2 & Photo 3)

459. Stanley #239 1/8-in. special dado plane, complete with SW logo blade, 90%+ japanning, fence chipped where rods goes thru, otherwise fine overall. (Photo & Photo 2)

460. Scarce Upson Nut Co. #35 transitional smooth plane, original blade with faint logo, very good overall. (Photo & Photo 2 & Photo 3)

461. Stanley #238 weather-strip plow plane with all 7 SW logo blades, blades come inside factory envelope, intact pre-sets, 90%+ japanning, fine overall. (Photo & Photo 2 & Photo 3)

462. Stanley #25 low angle 9 1/2-inch transitional plane, knob chipped at base but otherwise OK, Q logo blade, very good overall. (Photo & Photo 2 & Photo 3)

463. Stanley #378 weather-strip rabbet plane, 60%+ japanning, one depth stop and one cutter, very good overall. (Photo & Photo 2)

464. Gage Tool Co. #2 transitional smooth plane, nice painted tote and knob, very good overall. (Photo & Photo 2 & Photo 3)

465. A.O. Calhoon Patent rafter and polygon bevel and level, the level vial is MIA and there is only about 40% plating, needs a good cleaning, otherwise good. (Photo & Photo 2)

466. Stanley #49 tongue and groove plane, 90%+ plating, both cutters present, fine knob, fine overall. (Photo & Photo 2)

467. RARE HOBBE-MILLER BURLINGTON, IOWA square, PATENT APPLICATION ALLOWED, missing the pointer, otherwise very good, made on U.S. Patent No. 1,035,379 issued to Clarence M. Miller of Mt. Pleasant, Iowa. (Photo & Photo 2)

468. Chaplin's Patent #1210C corrugated 22-inch iron jointer plane, fine hard rubber tote, and wooden knob, patent dates in left side of plane, proper blade, corrugated top and bottom, fine overall. (Photo & Photo 2)

469. Stanley or Bailey #7? 21 1/2-inch prelateral iron joiner plane, solid brass adjuster nut, fine early rosewood tote and beaded knob, R&L logo blade, fine overall. (Photo & Photo 2)

470. Pair of Stanley BEDROCK #603 or 605 1/4 plane frogs. (Photo)

471. Stanley #28 toothing scraper blade, with Rule & Level logo, complete and very good. (Photo)

472. Bayley Patent corebox plane, this one marked G.I.C. CO for Gray Iron Casting Co., 90%+ japanning, fine overall condition. (Photo & Photo 2)

473. Stanley A6 aluminum fore plane, fine rosewood tote and knob, tote still has decal on it, fine overall condition. (Photo & Photo 2)

474. Stanley #338 adjustable level stand, 95%+ nickel plating, fine overall, this one comes with a Stanley #36, 12-inch cast iron plumb and level. (Photo & Photo 2)

475. C. SCHOLL MARCH 8, 1864 4-stem marking and mortise gage, complete and fine overall. (Photo & Photo 2)

476. Stanley #179 rosewood 7 1/2-inch marking and mortise gauge, very good overall. (Photo & Photo 2)

477. Stanley #198 double stemmed marking and mortise gage, rosewood head and steel beams, most of the nickel is peeling from the stems and screws, good overall. (Photo)

478. Stanley #66 rosewood marking gauge, oval head, a few typical nicks and dings, very good overall. (Photo)

479. Stanley #73 boxwood mortise gauge, complete and fine. (Photo)

480. OHIO TOOL CO. 04 1/2C heavy smooth plane, 80%+ japanning, faint logo on blade, very good overall. (Photo & Photo 2)

481. Scarce STANLEY #A4 aluminum smooth plane, tote has original decal, partial plating on lever cap, very good overall. (Photo & Photo 2)

482. Metallic Plane Co. #16 9-inch transitional smooth plane, faint logo on blade, tote spur deformed, adjustable throat feature intact and working, very good overall. (Photo & Photo 2 & Photo 3)

483. Foss Patent 9-inch smooth plane, 2-piece lever cap, no blade adjuster, original tote, nice beaded knob, Stanley R&L logo blade, body has a welded repair to front left side, good overall. (Photo & Photo 2 & Photo 3)

484. LAKESIDE (Union) 8-inch Trask patent transitional smooth plane, a few chips in the body, but otherwise very good. (Photo & Photo 2)

485. Unusual PAT APPL'D screw holding screwdriver, complete and very good. (Photo)

486. Scarce Stanley Rule & Level Co. Catalogue No. 34 1905 (first year for the #34) has a few cover tears and the cover is soiled, otherwise very good. (Photo)

487. Scarce Stanley #197 hard board fluting tool, complete and fine. (Photo)

488. Unusual Stanley SW logo READY EDGE plane blade with proper READY EDGE chip deflector marked with PAT 1-2-23, these used throw-away razor blades on the end (see next lot). (Photo & Photo 2)

489. Box of 5 Stanley Ready Edge 2-inch replacement blades. These were a flop for Stanley and thus very scarce, one of the end flaps is missing from the box, otherwise fine. (Photo & Photo 2)

490. Ridgely's plumb and level for wallpaper hangers, complete with original instructions in what may be the original box, fine. (Photo & Photo 2)

491. Union No. X6 "poor man's vertical post" fore plane, 90%+ japanning, fine tote and knob, nice original blade, fine overall. (Photo & Photo 2)

492. RARE Stanley #48 that was made from leftover UNION stock, the UNION name and model number were milled of and the milled areas were painted blue, and a Stanley decal was applied to the handle, the first we've seen or sold. (Photo & Photo 2)

493. Unusual 17 1/2-inch iron plane either used in the printing or shoe making industry, has a movable fence on the side, two blades, good wooden handle, fine overall. (Photo & Photo 2)

494. SCARCE Bailey DEFIANCE 18-inch iron fore plane with screw adjuster, has proper chip deflector, but improper Stanley blade, nice rosewood tote and short knob, fine overall. (Photo & Photo 2)

495. Three Stanley bitstock tools: Handyman #1226 1/2-inch screwdriver bit, new old stock with original price marked in ink; dowel pointer in like-new condition; plus a #139 3/4-inch countersink, complete and fine. (Photo & Photo 2)

496. Stanley #72 chamfer plane, 90%+ japanning, fine tote and knob, SW logo blade, fine overall. (Photo & Photo 2)

497. Union Tool Co. #90 (Same as Stanley #283) handled scraper, complete and fine, comes with original box, box heavily taped with clear tape. (Photo & Photo 2 & Photo 3)

498. Stanley #2 prelateral smooth plane, good rosewood tote and knob, R&L logo blade, japanning may have been enhanced, fine overall. (Photo & Photo 2 & Photo 3)

499. Pair of Stanley marking gages: #92 butt and rabbet gauge complete and fine; plus a #74 that has some staining on the wood, but is otherwise very good. (Photo & Photo 2)

500. Bailey Little Victor #51 toy sized block plane, 70%+ japanning, very good overall. (Photo & Photo 2)

501. Sargent #81 double side rabbet, the removable nose piece has had one ear broken off and glued back on, otherwise very good and perfectly usable. (Photo & Photo 2)

502. Bailey Little Victor 50 1/2 toy sized block plane, less than 30% nickel plating, on outside, 60%+ red japanning inside, very good overall. (Photo & Photo 2)

503. Stanley #25 12-inch screw driver, complete and very good. (Photo)

504. Scarce Foss Little Imp toy sized block plane, complete, very good overall condition. (Photo & Photo 2)

505. Stanley #82 razor edge spoke shave with intact blade, no hang holes, fine overall. (Photo)

506. Stanley #195 fiber board beveling plane, 90%+ japanning, fine tote, fine overall condition. (Photo)

507. Ohio Tool #0103 iron block plane, chipped on leading edge of lever cap, nice GLOBE logo on blade, very good overall. (Photo)

508. Ohio Tool Co. #08 24-inch iron jointer plane, nice B PLANE blade, splinter from tote spur, otherwise complete and very good. (Photo & Photo 2)

509. Stanley #132 transitional 26-inch jointer plane, complete and very good. (Photo & Photo 2)

510. Stanley #8 Type 5 24-inch iron jointer plane, first type lateral lever, nice beaded knob, tote spur MIA, otherwise very good. (Photo & Photo 2)

511. Gage Tool Co. #18 transitional 24-inch jointer plane, tote looks like a possible replacement, fine overall. (Photo & Photo 2)

512. Stanley #8 Type 11 iron jointer plane, most of the japanning in the bed is peeling, fine rosewood tote and short knob, very good overall condition. (Photo & Photo 2)

513. Gage G30 transitional 22-inch joiner plane, complete and fine. (Photo & Photo 2)

514. Stanley #93 SW logo shoulder 90%+ plating, fine overall. (Photo & Photo 2 & Photo 3)

515. Gage Tool Co. #13 transitional 20-inch fore plane, back of tote spur missing, otherwise complete and very good. (Photo & Photo 2)

516. Stanley #92 cabinet makers shoulder or rabbet plane, MADE IN USA, BB logo blade, 95%+ nickel, fine overall. (Photo & Photo 2)

517. Stanley #31 prelateral 24-inch transitional jointer plane, good R&L logo blade, tote spur MIA, otherwise complete and very good. (Photo & Photo 2)

518. RARE Stanley #90A screw adjusted cutter, this one was broken, but it's good for parts, the handle is good, so are the screws, these planes are almost impossible to find. (Photo & Photo 2 & Photo 3)

519. Stanley #31 prelateral 24-inch transitional jointer plane, solid brass adjuster nut, tote spur shortened, 75%+ japanning, later BB logo blade, very good overall. (Photo & Photo 2)

520. Stanley #73 razor edge spoke shave, complete with intact blade, less than 50% japanning, very good overall. (Photo & Photo 2)

521. Stanley #29 prelateral 20-inch transitional fore plane, good R&L logo blade, tote spur MIA, otherwise complete and very good. (Photo & Photo 2)

522. Stanley #83 scraper, with 90%+ nickel plating, fine wooden handle, fine overall. (Photo & Photo 2 & Photo 3)

523. Stanley #27 prelateral 15-inch transitional jack plane, fine R&L logo blade, fine tote and knob, complete and fine overall. (Photo & Photo 2)

524. Millers Falls No. 77 router plane new in tattered and taped original box. (Photo & Photo 2)

525. Ohio Tool #015 iron block plane in original box, plane has seen little use, but does have a crack in lever cap, it is otherwise fine, the box needs some corners re-taped, I know a good paper conservator. Ask and I'll give you her name. (Photo & Photo 2)

526. Stanley #208 box of level vials, box is full of glass vials for Stanley levels and they are packaged in sawdust, the box has some staining but is very good overall with an intact label. (Photo & Photo 2)

527. Stanley #207 Bench Stop new in original box, the stop is new, the box is fine. (Photo & Photo 2)

528. Four Stanley 3X Aluminum plane handles, all the handles are like new, the box is very good with one small tear on top and an intact label. (Photo)

529. Stanley #79 double ended side rabbet plane MADE IN ENGLAND, plane is new, box is very good. (Photo)

530. Stanley #9 1/2 block plane in original box, the plane is new, the box is poor with clear tape at corners and staining and Scotch tape on top and sides. (Photo)

531. Stanley #248A Weatherstrip Plane new in original box, the plane is fine with all parts, the box is very good with intact label. (Photo & Photo 2)

532. Stanley #50 light duty plow plane in original box, plane is complete and near new, and the box is very good with a mostly intact picture label, the top corners have some clear tape, very good overall. (Photo & Photo 2)

533. Stanley #386 jointer gauge or fence in original box, gauge is near new with 95%+ nickel, SW logo, comes with original instruction sheet, box bottom is torn, top is good with a partial label. (Photo & Photo 2)

534. Stanley #200 Cutter and Chisel Grinder new in original box, grinder is like new; the top front seem of box needs to be fixed, top of label needs to be pasted down, very good overall. (Photo & Photo 2)

535. Stanley #1 NOS plane blade, SW logo, in original wax envelope, very good. (Photo)

536. Stanley #281 BUTT GAUGE and MORTISER in original box, gauge is fine with BB logo; box is fair with corners taped with clear tape, and some writing on top. (Photo & Photo 2)

537. Stanley #207 BENCH STOPS new in original box each is wrapped individually, the stops are new, the box is very good and just needs one corner of the top re-taped. (Photo & Photo 2)

538. Stanley #5C jack plane new in original box, plane is new, box is very good with intact label. (Photo)

539. Stanley #81 wood scraper, scraper is new; box has two tears on back of top, otherwise very good with intact label.

540. Three Stanley bench planes: #7C jointer, BB logo blade, 85%+ japanning, tote spur broken and glued, fine overall; #5 with fine tote and knob, 95%+ japanning, BB blade, fine overall; #4 smoother with 95%+ japanning, fine tote and knob, fine overall. (Photo & Photo 2)

541. Lufkin #7164 4-foot sliding inside measure, complete and fine. (Photo)

542. Three sets of Hollow and Round bottoms for Stanley #45 combination plow plane, plus a #5 nosing attachment, the hollow and round cutters all have the patent dates, the nickel is 95%+ on all but the #5 and 85%+ on the #5, a fine bunch of bottoms of you need them. (Photo & Photo 2)

543. Scarce Stanley 4 Square #1105 with 90%+ original paint, fine tote and knob, fine overall. (Photo & Photo 2)

544. Stanley #OH5 TWO-TONE jack plane with maroon and yellow paint, complete and in fine overall condition. (Photo & Photo 2)

545. VICTOR by Stanley #1105 with gray and red paint, fine tote and scuffed knob, fine overall. (Photo & Photo 2)

546. Scarce Vaughan & Bushnell 6-inch iron block plane with knuckle jointed lever cap made of nickel plated sheet metal, adjustable throat, fine nickel plating, fine overall. (Photo & Photo 2)

547. Vaughan & Bushnell Lincoln Series 14-inch corrugated iron jack plane good knob, tote spur sheared off, top of cutter has been peened over and filed or ground off, very good overall. (Photo & Photo 2)

548. RARE BAILEY TOOL CO DEFIANE E block plane with battleaxe, intact lever cap, 85%+ japanning, working adjuster, a few tiny chips in rear of throat, otherwise fine. (Photo & Photo 2 & Photo 3)

549. Stanley #5 prelateral iron jointer plane with solid brass adjuster nut, fine R&L logo blade, tote spur sheared off, fine beaded knob, very good overall. (Photo & Photo 2)

550. Chaplin's Patent 6 1/2-inch iron block plane, Tower & Lyon blade, 50%+ japanning, will clean to very good overall condition. (Photo & Photo 2)

551. Stanley #45 plow plane box, this is the wooden box that would have had a sliding lid, a good part of the label remains, very good overall. (Photo)

552. Early Stanley #130 double ended block plane, with 6-point star cap, side have had japanning enhanced, good cutter with patent dates, very good overall. (Photo & Photo 2 & Photo 3)

553. Lot of MWTCA GRISTMILL magazines from the 1990s thru 2010. (Photo)

554. Four bundles of early tool dealer catalogs including ones from PHILIP WHITBY; TOM WITE; and BOB KAUNE; most from the 1980s and 1990s. (Photo)

555. Choice bundle of LIVE FREE OR DIE auction catalogs, there are five bundles total. (Photo)

556. Three bundles of early Tool Dealer Catalogs by Tom Witte; Bud Steere; and Bob Kaune. (Photo)

557. Choice bundle FINE TOOL JOURNALS, there are six bundles total. (Photo)

558. Three bundles of early Tool Auction Catalogs from J.P. Bittner; Richard Crain -Your Country Auctioneer.

559. Choice from among three bundles of Brown Auction Co. catalogs. (Photo)

560. Lot of Martin J. Donnelly Tool Catalogues from the 1990s and early 2000s. (Photo)

561. Two bundles of pocket price guides by John Walter THE TOOL MERCHANT of Marietta, Ohio. (Photo)

562. Full set of STANLEY TOOL COLLECTOR NEWS magazines that were produced by John and Randa Walter of Marietta, Ohio. (Photo)

563. Stanley #193 Fibre Board Plane in original box, this one was complete and new, but has been stored in a damp basement and has some rust to the exposed surfaces, plane will clean to fine or better condition, box is fair with partial label. (Photo)

564. Stanley #6C fore plane new in original box, plane is new, box is very good. (Photo)

565. Stanley #45 pasteboard box with both boxes containing 23 blades, both cutters boxes have intact labels, also included is a cam, set of short rods, etc. The outer box has a good bottom, the top is split at one corner and needs to be taped. If you've got the plane, you need this lot. (Photo)

566. Seven brass pumps, all have been polished. (Photo)

567. Lot of four pipe wrenches including a Winchester 10-inch, plus a sucker rod wrench. (Photo)

568. Lot of 22 shoemaker or leather tools including creasers, stitching or pricking wheels, knives and hole punches. (Photo & Photo 2)

569. Lot of European tools: German horn plane; large homemade double bead plane (top of wedge sawed off) and two saws one looks like a stair saw, the other is a flushing or veneer saw. (Photo)

570. Elgin adjustable alligator wrench some light pitting and light rust, good overall; and a BOOS TOOL CORP. Kansas City adjustable nut wrench, good overall. (Photo)

571. Five nut wrenches: three twist handle and two wooden handle Coes-type one by L&S Co. Cleveland and the other by Coes. (Photo)

572. Old woman's tooth router with decorated top; plus a very good stair saw. (Photo)

573. Five wooden handled pipe or pipe/nut wrenches: Bemis & Call 15-inch combination pipe/nut wrench with long sleeve adjuster, wooden handle cracked; a similar 12-inch pipe/nut wrench; two 12-inch STILLSON; and a 10-inch DANIELSON. (Photo)

574. Four wooden handled nut wrenches: 20-inch that has had the top jaw welded to the bar; W&B 15-inch, very good; 12-inch H.D. Smith PERFECT HANDLE wooden handle chipped; unmarked 10-inch., very good. (Photo)

575. Large Peter Wright anvil, approx. 150 lbs. on a steel stand, VG. (Photo & Photo 2)

576. Corn planter and potato planters (choice).

577. Two rosewood marking and mortis gages similar to if not actually Stanley #77 models, both have fine points. (Photo)

578. Stanley #7 iron jointer plane, complete and in fine overall condition. (Photo & Photo 2)

579. WARDS MASTER (Stanley) #5 iron jack plane, complete and fine; plus a Stanley #4 iron smooth plane, will clean to very good overall condition. (Photo & Photo 2 & Photo 3)

580. Millers Falls #10C (same as Stanley 4 1/2C) jumbo smooth plane, complete and fine. (Photo & Photo 2)

581. Lot of 12 mostly automotive wrenches: WALDEN WORCESTER No. 6018 9/16-inch brace wrench; FORD adjustable nut wrench; F2872 2 lug wrench; WALDEN WORCESTER #20; WALDEN WORCESTER TEE FLEX 1020 5/8-inch, etc. (Photo)

582. Stanley BEDROCK #607C RT jointer plane, lever cap has been broken and welded, right side pitted and tote needs to be replaced; plus a CRAFTSMAN (Millers Falls) 18-inch with a hang hole in the back, otherwise fine. (Photo & Photo 2)

583. Medium sized dowel pointer, complete and very good; plus a Stearns Patent hollow auger, complete and very good. (Photo)

584. Stanley #40 scrub plane, fine V-logo blade, fine early style knob, nice tote, fine overall; plus a Stanley #3 smooth plane, later model with early replacement knob, otherwise fine. (Photo & Photo 2)

585. Large Stearns dowel or spoke pointer, complete and fine; plus an E.C. Stearns adjustable hollow auger with intact depth stop, fine overall. (Photo)

586. Two bull leads and six different wrenches including a twist handle; B&C 10-inch; UNIVERSAL WRENCH CO. DETROIT-WINDSOR; a homemade alligator, etc. (Photo)

587. Stanley #984 corner brace, very good overall; HARROLD U.S.A. corner type brace; and a hand-cranked drill-like tool used to turn cream separator plates in a cleaning solution. (Photo)

588. Five different screw-adjust implement or tractor wrenches: 12-inch IH 5E; 9-inch IH 2E; 9-inch IH 1E; 9-inch Z788; 9-inch Vandegrift with loop handle; all very good. (Photo)

589. Three bitstock tools: Millers Falls angle boring attachment; GERMAN brace with tapered reamer; and a bung auger, complete and very good. (Photo)

590. Six assorted items: two wrenches inc. AMERICAN SAW No. 2 alligator; DEC. 13, 1898 cutters, BATAVIA, NY; Nickel plated tongs or forceps; ice tongs, etc. (Photo)

591. Three box or crate opening tools including one from WEBER SUPPLY MOMENCE, ILL; DIAMOND SENIOR CRATE OPENER Duluth, Minn.; and a large ? patented March 5, 1901. (Photo)

592. Six wooden molding planes inc. D.R. BARTON; A.C. BARTTLETT; etc. (Photo)

593. Lot of 26 misc. auger bits and 13 other bitstock tools including pipe reamers and a washer cutter. (Photo & Photo 2)

594. Fine GOMH saddler's knife; unmarked leather slitter, and a shoemakers combination lasting plier and hammer. (Photo & Photo 2)

595. Lot of six all-steel hammers, one with a handle that terminates in a screwdriver, plus a screwdriver. (Photo)

596. Stanley #113 compass or circle plane, fine V-logo blade, 85%+ japanning, fine overall. (Photo & Photo 2)

597. Lot of five bevels, two are Stanley No. 25 with 8-inch blades that are like new; plus three try squares including two with rosewood handles. (Photo)

598. Stanley #2 7-inch smooth plane, very good T-logo blade, tote broken in middle and needs to be glued; good knob, one corner of lever cap chipped, will make a good user. (Photo & Photo 2)

599. Four wooden planes: a PEARCE NEW YORK jack that is missing the tote; a Sandusky jack, complete and very good; a screw-arm plank; and a 14-inch handled grooving plow by L.CASE, has hand the handle broken off and replaced by a simple pole. (Photo & Photo 2)

600. Stanley BAILEY #36 wide body smooth plane, V logo blade, 99%+ japanning, like new and as good as they get. (Photo & Photo 2 & Photo 3)

601. H.D. SMITH 21-inch Perfect Handle wrench, complete and very good. (Photo & Photo 2)

602. Stanley BAILEY #35 transitional smooth plane with 98%+ japanning, SW logo blade, body still has partial decal on it, fine overall condition. (Photo & Photo 2 & Photo 3)

603. Pair of Stanley 4-Square 18-inch levels, both are complete, one is fine the other very good. (Photo)

604. Union Tool Co. #515 Trask Patent transitional smooth plane, 95%+ japanning, fine tote and knob, fine overall condition. (Photo & Photo 2 & Photo 3)

605. Stanley 4-Square poster, Copyrighted by The Stanley Works, suitable for framing. (Photo)

606. Stanley Bailey #24 Type 17 transitional smooth plane, 99%+ japanning, fine knob, as good as they get. (Photo & Photo 2 & Photo 3)

607. Sargent PB plow plane box with set of 21 blades, three short rods, and MADE IN USA screwdriver. (Photo & Photo 2)

608. Scarce Ohio Tool Co. #040 scrub plane, original blade has been ground and sharpened flat on the bottom, fine tote and low knob, fine overall. (Photo & Photo 2 & Photo 3)

609. Stanley #18B small framing square, SW logo, fine overall. (Photo & Photo 2)

610. Sargent #600BR take-down rafter square, fine overall. (Photo & Photo 2)

611. Stanley #66 hand beader, flat and found fence, one blade included, 90%+ nickel, complete and very good. (Photo)

612. Stanley #21 1/2 universal square, made for one year only, SW logo, 12-inch, complete and very good. (Photo)

613. Stanley #31 angle divider, nice rosewood beam, very good overall; plus a Stanley #30 angle divider, missing the straight edge at the bottom, otherwise very good. (Photo)

614. Stanley #21 1/2 universal square, 9-inch blade, SW logo, made for one year only, fine overall. (Photo)

615. Keen Kutter (Coes) 8-inch all-steel screw-adjust nut wrench, complete and very good; plus a small 4 1/2-inch ACME with wire handle, coated with lacquer and very good. (Photo)

616. Stanley #25 6-inch sliding bevel with nice rosewood handle, very good overall; plus a nice X63 round bottom shave with SW logo blade, fine overall. (Photo)

617. Stanley aluminum plane handle for bench planes; a #22 dowel pointer that is near new; and cutters for a #5 nosing tool plus a 1 1/8-inch hollow blade, both cutters are fine. (Photo)

618. Hebblethwaite Patent hammer and wrench, replacement handle, good overall; plus a 3/4-inch socket chisel by NORTHERN KING by Marshall Wells Hardware, Duluth, Minn. (Photo)

619. Unusual Yankee #43 push drill in fine original condition; plus a like new Stanley #177 radio screwdriver. (Photo)

620. Pair of Winchester scissors in fine original condition; plus a pieces that looks like it would be used to brew loose leaf tea, very good. (Photo)

621. Lot of Stanley items: two #1299 razor or box knives, one very good; a 13-506 block plane blade in original packaging, a #90 marking gage very good, and a Stanley #291 1/2 scraper, good overall. (Photo)

622. Rare apparatus for carrying school books? Pat. Nov. 11, 1879. (Photo & Photo 2)

623. Set of four blades for Stanley #238 or 248 plow planes; included are the 1/4; 7/32; 3/16 and 1/8; all have the SW logo and are very good. (Photo)

624. Unusual brass box marked WALTHAM WATCH COMPANY, likely for the pocket watches this company made, very good overall. (Photo)

625. Pair of Union vertical post planes: X3G corrugated 8-inch has a small crack in left side and a good LAKESIDE blade, will make a good user; plus a X4G corrugated smoother with LAKESIDE blade, tote has glued repair, good knob, another good user. (Photo & Photo 2)

626. Winchester REPEATER 12 GAUGE 2 5/8 DUPONT wooden shipping crate, complete and very good. (Photo & Photo 2)

627. Fine late model Stanley #3 smooth plane with 98%+ japanning, fine tote and knob, BB logo blade, little if ever used, fine overall. (Photo & Photo 2)

628. Winchester REPEATER 12 GAUGE 2 5/8 wooden shipping crate from Pritzlaff Hardware Milwaukee, Wis. complete and very good. (Photo & Photo 2)

629. Sargent #708 Auto Set smooth plane, nice original blade, scuffed but intact tote, knob chipped at base, very good overall. (Photo & Photo 2)

630. Lot of plane parts including a K102 & body for an L.BAILEY #5 with all-steel handle. (Photo & Photo 2)

631. SARGENT #9 Shaw's Patent 9-inch smooth plane, good knob, tote spur missing, will clean to very good overall condition. (Photo & Photo 2)

632. Lot of 3 Winchester screwdrivers including one SPECIAL and several assorted auger bits, a scratch awl, etc. (Photo)

633. Pair of iron smooth planes: Union No. X4 poor man's vertical post, Union blade, god knob, top of tote broken, will make a good user; plus a Siegley #4 9-inch smooth plane with Siegley StS blade, nice tote and knob, very good overall. (Photo & Photo 2)

634. Lot of seven iron block planes for parts plus two complete mini block planes. (Photo)

635. Lot of mostly Stanley bench plane parts, includes a frog for #2 smoother, several #3 frogs, a #10 or 10 1/2 chip deflector, etc. (Photo)

636. Stanley planes for parts: #289 skew bladed rabbet that needs a blade, and fence, is otherwise very good overall; plus a #146? 3/8-in match plane missing both blades, otherwise very good; and a fence for a #378 weather-strip rabbet, nice japanning, fine. (Photo & Photo 2)

637. Lot of 5 risers for a Stanley #57 corebox plane, each has 90%+ nickel plating. (Photo & Photo 2)

638. Lot of Stanley parts including #62 spoke shave body; clapboard sidding gage; a beading stop etc. (Photo)

639. Two try squares including one that has a rosewood handle and a 12-inch blade, very good overall; and one Stanley #20 with an 8-inch blade, fine. (Photo)

640. Stanley Hardware wooden shipping crate from the Stanley Works, good overall. (Photo & Photo 2)

641. Yankee #75 lightning brace, may need some oil, good overall condition. (Photo)

642. Stanley #60 and #62 spokeshaves, both are R&L vintage, will make good users. (Photo)

643. Winchester copper flashlight, the lens is cloudy and there are a few dings but it is in good overall condition. (Photo & Photo 2)

644. Box of 500 MONARK rim fire .22 cartridges by Federal Cartridge Corp. Minneapolis, Minn. Plus another box containing two partial boxes of .22 ammo. (Photo)

645. Four 1/8-inch blades for Stanley #239 plows, three have V logo and one has SW and all are marked with patent date, very good overall. (Photo)

646. Lot of MWTCA Gristmill Magazines from 2005 to 2009; plus the 1999 and 2000 Catalogue of Antique Tools by Martin J. Donnelly and C.H. Wendel's Encyclopedia of Antique Tools & Machinery.

647. The ART OF FINE TOOLS book by Sandor Nagyszalanczy in like-new condition; plus 3 volume set of hardbound books of the Handyman Club of America; Tools & Techniques; Member Hints & Projects: and Landscape Structures & Decks.

648. Lot of 9 MWTCA catalog reprints inc. Buff & Berger; Otto Young & Co.; Millers Falls Catalogue 42; The Saw In History by Disston; Jackson & Tyler; Bench Work in Wood by Goss; Lufkin Cagalog Number 10; National Saw Co.; and the packet of pamphlets reproduced in 2002.

649. RARE book THE HAMMER “The King of Tools” by Ron Baird & Dan Comerford, long out of print, complete and fine; plus three other tool books including Handsaw Makers of North America by Erwin L. Schaffer, like new.

650. Twelve-volume set of Popular Mechanics DO-IT-YOURSELF Encyclopedias.

651. Lot of five wrenches and tire bead breaker made in Sioux City, Iowa by SOO TOOL CO. (Photo & Photo 2)

652. Two spring scales; one measures up to 24 pounds and the other up to 145 pounds. (Photo & Photo 2)

653. Lot of four alligator wrenches and one open end wrench. (Photo)

654. Lot of six tools: stair saw; another flushing saw; Stanley #48 tongue & groove plane (no blades); #78 duplex plane needs locking screw for fence; Millers Falls hand drill; & S.E. COLLINS VALPARISO, IND Pat. May 1, 1906 scraper. (Photo & Photo 2)

655. Lot: 2 different nail pullers; medium sized bung reamer; and a spring-loaded wire twister. (Photo)

656. Lot of seven wood planes and one E.C. Atkins Co. ram's horn scraper. (Photo)

657. Seven 24-inch 4-fold boxwood rules including Stanley #62, #68. (Photo)

658. Lot of seven planes including a nice copper's croze. (Photo)

659. Lot of seven 4-fold rules: two #32; four #65 including one by C-S Co. and a well worn #68 by Upson Nut Co.

660. Lot of seven bearing scrapers including one by BUFFUM TOOL CO. LOUISIANA, MO. With a swastika logo. (Photo)

661. Seven rules: four Lufkin zig-zag rules; an Interlox rule; Stanley #66 3/4 fully bound 36-inch rule; & a Stanley 36 1/2R caliper rule. (Photo)

662. Lot of 5 Perfect Handle-type screwdrivers, one has a notched blade for removing split nuts like those used on early saws. (Photo)

663. Set of Russell Jennings Auger bits Set No. 32 1/2 quarters. Several of the bits are marked SECOND, all are usable. (Photo)

664. Grain probe; two horse bits; two corn huskers, etc. (Photo)

665. Set of 13 assorted bits inside a nice patented bit box. (Photo)

666. Four brass plumb bobs, one in original box. (Photo)

667. Five miniature screwdrivers including two that may have come with Stanley #45 or #55 planes. (Photo)

668. Nice mahogany and brass pad saw; and another unknown saw. (Photo)

669. Four hammers including an A.T. Nelson Patent from Wilton, Iowa. (Photo)

670. Lot of five wrenches and one rivet set from Rockford ILL. (Photo & Photo 2)

671. Coachmakers double router marked on end of one handle BANISTER WMSBURG MASS., good overall. (Photo)

672. Lot: two race knives; wall paper trimmer, bearing scraper, mini nail puller, etc. Nine items in all. (Photo)

673. Lot of four brass items; one marked KELLOGG MFG. Rochester, NY. (Photo)

674. Lot: Stanley trammel points: Stanley aluminum zig zag rule, and two pocket levels, one attached to a square. (Photo)

675. Choice of 5 walking cultivator type tools.

676. Treadle grindstone for sharpening scythe blades and sickle bars, etc.

677. Lot: Stanley pocket level that attaches to square; clapboard siding gage; #93 butt gauge; and two 4-fold rules #32 & #69. (Photo)

678. Three measuring tools including Stanley sliding inside measure; BELCHER BROS. New York shoe measuring stick, etc. (Photo)

679. Lot: two rosewood marking gages similar to Stanley #77; two rosewood handled sliding bevels; a wooden spokeshave and a wooden scraper.

680. Lot: Disston 14-inch level; George Bishop ram's horn scraper; stair saw; spokeshave, and a mini scraper. (Photo)

681. Lot of household tools: ice chippers; lemon squeezer; ice pick; pan lifters, etc. (Photo & Photo 2)

682. Lot of farm tools: hay hooks; buggy axle nut wrench; corn huskers; wire twister, etc. (Photo)

683. Two saws: Disston D8 and an unknown make sharpened on both sides of blade. (Photo)

684. E.C. Atkins plane blade sharpening jig, very good. (Photo)

685. Cleveland Twist Drill Co. drill bit stand, very good. (Photo)

686. Stanley #45 combination plow plane in original wooden box; comes with three main sections, all depth stops, beading stop; early style cam rest & a full box of original blades, fine overall. (Photo & Photo 2 & Photo 3)

687. Lot: Lufkin tri-fold yardstick; Disston stair saw with decorative nuts; hand forged tapered reamer, etc. (Photo & Photo 2)

688. Pair of saws: Keen Kutter 11ppi; & an Atkins flooring saw, both will clean to very good usable condition. (Photo & Photo 2)

689. Millers Falls No. 502 in fine overall condition. (Photo & Photo 2)

690. Nice pair of brass trammels. (Photo & Photo 2)

691. Pair hand drills: Yankee No. 1446 & Millers Falls No. 77A, both are fine. (Photo)

692. Craftsman ratchet brace in fine overall condition; & a deep throated coping saw. (Photo)

693. Two drawknives; one with folding handles, both are fine. (Photo & Photo 2)

694. Fine Bridgeport Tool Co. Boy Scout hatchet. (Photo & Photo 2)

695. Three mallets including one with iron rings and one that has replaceable wooden faces. (Photo)

696. Food chopper; scraper, and a two-handed inshave. (Photo)

697. Wooden slaw cutter with tin Carnation Waterloo Iowa sign, very good overall. (Photo & Photo 2)

698. Early carpenter's slick, no makers mark visible. (Photo)

699. Lot: Hide scrapers; Pat. 1626808 cutter; PEXTO #793 tin bender; D.STAM & CO. curved knife; & a clamp. (Photo)

700. Lot of three crate opening tools. (Photo)

701. Stearn's iron scraper, Stanley #94 butt gauge; marking gauge; Stanley #91 marking gauge; & three chisels. (Photo)

702. Lot of mystery tools, six in all, one is a crate opener, another is a ratchet wrench, you guess what the other four items are. (Photo & Photo 2)

703. Lot: Leather tools including a C.S. Osborne slitter; leather punch; lasting pliers; and early Stillman Patent saw set & a small Starrett machinist square. (Photo)

704. Lot: T wrench #31; three auger bits; a tapered reamer; Sargent nippers; SHARPLES wrench; Williams #605 wrench & a brass tool handle filled with bits. (Photo & Photo 2)

705. Lot: Offset screwdriver; unusual Mohawk saw set; torpedo level; small ships bevel; Stanley sliding bevel, 101 mini plane, etc. (Photo)

706. Stanley #50 double plumb and level, very good overall. (Photo)

707. Large Railroad Oil Can, dented spout, very good overall. (Photo & Photo 2)

708. Large scythe in very good overall condition.

709. Choice of three walk-behind antique garden cultivators.

710. Three different corn knives, one is NOS.

THE END.

Sale Managed by Michael J. Urness &
Great Planes Trading Co.

www.GreatPlanesTrading.com

Phone 314-434-4325

email: Ratdaddy@mac.com